Conduit & Fittings
-
BRITECH BRISK-1 - Series Resistance Cable Splice Kits - Single Conductor
Splice Kit for TXLP/1 and Custom Cable Systems (Single Conductor)
Learn More...$46.00 -
BRITECH TH114-AF-GB - Britech Floor Warming & Radiant Heating Controls - 120/240V - 16A
Floor Warming/Room Heating thermostat, in-floor sensor, C/W integral GFCI, manual operation
* This item has been discontinued. Please refer to the link below for the replacement suggested by the supplier
https://www.bulbspro.com/oth3600-ga.html
Learn More...$167.00
-
BRITECH HT-1 Label - Electric Heat Trace Warning Label
BRITECH HT-1 Label - Electric Heat Trace Warning Label
Learn More...$3.00 -
OUELLET NADCM-S-150 - Uncoupling self-adhesive membrane for floor heating cable - Roll of - 46'7" x 3'3" - Covered surface 150 sq. ft.
Can be installed by an electrician. Self-adhesive, no need for thin-set mortar1. Quick installation and no wait time between laying the membrane and laying the cable. Optimal heat distribution from the cable to the floor. Spacing of 3 5/8” and a density of 10W/sq. ft.
Learn More...$582.30 -
OUELLET NADCM-S-80 - Uncoupling self-adhesive membrane for floor heating cable - 2’ 6-5/16’’ X 3’ 3’’ - Covered surface 81.6 sq. ft. - Box of 10 sheets
Can be installed by an electrician. Self-adhesive, no need for thin-set mortar1. Quick installation and no wait time between laying the membrane and laying the cable. Optimal heat distribution from the cable to the floor. Spacing of 3 5/8” and a density of 10W/sq. ft.
* Above price is for whole pack of 10 pieces.
Learn More...$369.00 -
BRITECH AC112-01 - Floor Sensor Only
BRITECH AC112-01 - Floor Sensor Only
Learn More...$38.00 -
OUELLET ELB-21 - Gutter Mounting Plate
OUELLET ELB-21 - Gutter Mounting Plate
Learn More...$15.30 -
-
Danfoss 088L0014 - LX Repair Kit (includes: crimp connectors, repair wire, heat shrink tubes)
LX Repair Kit (includes: crimp connectors, repair wire, heat shrink tubes)
Danfoss New LX - Electric Floor Heating Installation Video
Learn More...$46.40 -
Danfoss 088L0010 - GX and TX Repair Kit (includes: crimp connectors, repair wire, heat shrink tubes)
TX Repair Kit (includes: crimp connectors, repair wire, heat shrink tubes)
Danfoss New LX - Electric Floor Heating Installation Video
Learn More...$45.88 -
Danfoss 088L3451 - 3 Pole 40 Amp - 208-240 Volt Coil Voltage Contactor
Contactor or LX Power Module is required for loads exceeding 15 Amps on a single thermostat. All contactors are complete with NEMA 1 enclosure. Danfoss 088L3451, Single Contactor, 600V Load Max.
Learn More...$200.07 -
Danfoss 088L3450 - 3 Pole 40 Amp - 120 Volt Coil Voltage Contactor
Contactor or LX Power Module is required for loads exceeding 15 Amps on a single thermostat. All contactors are complete with NEMA 1 enclosure. Danfoss 088L3450, Single Contactor, 600V Load Max.
Learn More...$200.07 -
Danfoss 088L5135 - Power Module with GFCI for use with LX Thermostats
The Danfoss Power Module combined with either the LX Programmable or Non-Programmable Thermostat allows for even larger applications and can be controlled with a single thermostat.
Danfoss New LX - Electric Floor Heating Installation Video
Learn More...$160.45 -
Danfoss 088L5133 - LX Non-Programmable Thermostat with Floor Sensor
Non-Programmable model. Temperature Range 5oC to 40oC, Supply Voltage 120V-240V, 50/60Hz, Large Backlit Display, Class-A GFCI, Approved for Wet Locations, Dual Voltage Capabilities. All thermostats include a Floor Sensor with 10 ft. lead
Danfoss New LX - Electric Floor Heating Installation Video
Learn More...$139.00 -
Danfoss 088L5132 - Programmable Thermostat with Air Sensor (and floor temperature limiter)
Temperature Range 5oC to 40oC, Supply Voltage 120V-240V, 50/60Hz, Large Backlit Display, Class-A GFCI, Approved for Wet Locations, Dual Voltage Capabilities. All thermostats include a Floor Sensor with 10 ft. lead
Danfoss New LX - Electric Floor Heating Installation Video
* This item has been discontinued, please refer to the link below for the replacement suggested by the supplier
https://www.bulbspro.com/danfoss-088l5130.html
Learn More...$195.55
-
Danfoss 088L5130 - LX Programmable Thermostat with Floor Sensor
( Most Popular ) Temperature Range 5oC to 40oC, Supply Voltage 120V-240V, 50/60Hz, Large Backlit Display, Class-A GFCI, Approved for Wet Locations, Dual Voltage Capabilities. All thermostats include a Floor Sensor with 10 ft. lead
Danfoss New LX - Electric Floor Heating Installation Video
Learn More...$241.24 -
BRITECH CATEST - Electrical Fault Indicator for Heating Cables
BRITECH CATEST - Electrical Fault Indicator for Heating Cables
Learn More...$16.00 -
BRITECH 23832-HOUSING - Ground sensor housing for HSC-24 and SIT-6E
Ground sensor housing for HSC-24 and SIT-6E
Learn More...$99.00 -
Danfoss 088L1053 - Cable Strapping (15 ft./4.5m) - For Danfoss LX or GX Heating Cable
Cable Strapping (15 ft./4.5m) for Danfoss Heating Cable
Danfoss New LX - Electric Floor Heating Installation Video
Learn More...$46.40 -
Danfoss 088L1054 - Cable Strapping (75 ft./22.9m) - For Danfoss LX or GX Heating Cable
Cable Strapping (75 ft./22.9m) for Danfoss Heating Cable
Danfoss New LX - Electric Floor Heating Installation Video
Learn More...$57.03