Conduit & Fittings

BRITECH ASE DS-2B - Snow/Rain Sensor Controller - 120/240V - 30A

* This item has been discontinued, please refer to the Specification sheet attached for the replacement ASE DS-2C suggested by the supplier

Danfoss GX Contactor Panel with timer and GFEP (Ground Fault Equipment Protection), 200A - GX Snow Melting Contactor/Timer - 120 Volts Coil Voltage - 200 Max. Amps

Danfoss GX Contactor Panel with timer and GFEP (Ground Fault Equipment Protection), 100A - GX Snow Melting Contactor/Timer - 120 Volts Coil Voltage - 100 Max. Amps

Danfoss GX Timer Panel 200A, with 4hr timer, 3P, 600 Volts - GX Snow Melting Contactor/Timer - 120 Volts Coil Voltage - 200 Max. Amps

Danfoss GX Timer Panel 100A, with 4hr timer, 3P, 600 Volts - GX Snow Melting Contactor/Timer - 120 Volts Coil Voltage - 100 Max. Amps

DS-5 Built-in Sensor/Controller for Snow Melting Applications. 120VAC/208-240VAC, Field Selectable. Max. Heating Load Dual 30A @240VAC. NEMA 3R Enclsoure. Delay TImer 30-90 minutes.

100-277V Universal Input Power Supply. Max. 30Amp @ 277V. NEMA 3R Ecnlosure. Delay Timer 30-90 Minutes, Field Selectable.

GX850 ACP With Onboard 100A Contactor- 600V. Control Voltage 120V, Max. Heating Load 150A. NEMA 4X Enclosure. 

GX 850M Controller for Snow & Ice Melting. Require ground or roof sensors. Control Voltage 120V.

Contactor or LX Power Module is required for loads exceeding 15 Amps on a single thermostat. All contactors are complete with NEMA 1 enclosure. Danfoss 088L3451, Single Contactor, 600V Load Max.

Contactor or LX Power Module is required for loads exceeding 15 Amps on a single thermostat. All contactors are complete with NEMA 1 enclosure. Danfoss 088L3450, Single Contactor, 600V Load Max.

The Danfoss Contactor Panel is primarily designed for snow and ice melting applications. • Low cost • Simple installation • NEMA 1, UL listed enclosure • A LED heat on indicator • Pre-wired terminal connections • 120V on/off remote heat indication • Four hour timer

The Danfoss Contactor Panel is primarily designed for snow and ice melting applications. • Low cost • Simple installation • NEMA 1, UL listed enclosure • A LED heat on indicator • Pre-wired terminal connections • 120V on/off remote heat indication • Four hour timer

Satellite Contactor for Modular Snow Melting Control with GFEP 50A@600V 3PH

Satellite Contactor for Modular Snow Melting Control with GFEP 50A@208-240V 3PH

Remote Control Unit for APS-4C, SC-40C and GF-PRO

Remote Control Unit for APS-3C, PD-PRO and EUR-5A

Dual Sensor Controller for Snow and Ice Melting Systems NEMA 4X 7A Inductive 30A Resistive 30A@100-277V

Aerial Mounted Snow and Ice Melting Controller 3A Inductive 16A Resistive 100-240V