Conduit & Fittings

110 to 125 VAC Solid-state Hardstart Relay, includes relay, overload, start and run capacitor. Used on refrigeration systems without run capacitors. Rated for 1/12 HP to 1/5 HP compressors. Maximum RLA 4.05 Amps. This kit includes a new run capacitor. - Prevents low voltage starting problems - Ideal solution for replacing all four components in a system with a run capacitor - Designed for modern high efficiency compressors - Helps older compressors start and run cooler

110 to 125VAC Solid-state Hardstart Relay, includes relay, overload, and start capacitor. Used refrigeration systems with or without run capacitors. Rated for 1/4 HP to 1/3 HP compressors. Maximum RLA 6.8 Amps.Prevents low voltage starting problems - Replaces relay, overload and provides a boost for hard start and unbalanced systems

1/40HP - 1.00A - 1/1550 RPM - 130CFM - 1.50"×5/16" Shaft - 92-A8602 Bracket Part - 66-A508216 Blower Part - 5 1/16" Dia - 2 5/32" Width - 5/16" Bore - CW Rot

AXIAL FAN - 106 CFM , 12W, 115V, 3100 RPM. Die-cast Aluminum Housing, Shaded Pole Motor. Ball Bearing, Impeller: Plastic, Connection: Terminal.

SUPCO® offers the most complete line of refrigeration relays, overloads and hard starts in the industry. For refrigeration systems with and without run capacitors, just choose the right combination for your application. All combinations are pre-wired - Locked rotor protection eliminates start winding overheating - PRO series installs on "pin-type" terminal - Can be used with and without start capacitor motors from 1/12 to 1/5 hp

AXIAL FAN - 21 CFM , 9W, 115V, 2000 RPM. Die-cast Aluminum Housing, Shaded Pole Motor. Sleeve Bearing, Impeller: Metal, Connection: Wire leads.

These relays, overloads and hard start combinations can also be used on systems without run capacitors - Locked rotor protection eliminates start winding overheating - Safe, reliable, long lasting PTC relay - Can be used with and without start capacitor

110 to 125 VAC Solid-state Hardstart Relay, includes relay, overload, start and run capacitor. Used on refrigeration systems without run capacitors. Rated for 1/3 HP to 1/2 HP compressors. Maximum RLA 13.3 Amps. - Prevents low voltage starting problems - For systems with or without run capacitors - Designed for modern high efficiency compressors - Helps older compressors start and run cooler

110 to 125 VAC Solid-state Hardstart Relay, includes relay, overload, start and run capacitor. Used on refrigeration systems without run capacitors. Rated for 1/3 HP to 1/2 HP compressors. Maximum RLA 13.3 Amps. This kit includes a new run capacitor. - Prevents low voltage starting problems - Ideal solution for replacing all four components in a system with a run capacitor - Designed for modern high efficiency compressors - Helps older compressors start and run cooler

AXIAL FAN - 460 CFM , 72W, 115V, 3400 RPM. Die-cast Aluminum Housing, Shaded Pole Motor. Ball Bearing, Impeller: Plastic, Connection: Screw

Equipped with an electro-mechanical relay, locked rotor protector and a 255 mfd start capacitor - Increases torque to its maximum capacity

1/80HP - 0.65A - 1/1500 RPM - 75 CFM - 1.10"×5/16" Shaft - 92-A8602 Bracket Part - 66-A508202 Blower Part - 5 1/16" Dia - 2" Width - 5/16" Bore - CW Rot

AXIAL FAN - 106 CFM ,22W, 115V, 3000 RPM. Die-cast Aluminum Housing, Shaded Pole Motor. Ball Bearing, Impeller: Metal, Connection: Wire Leads.

RO series features "snap-on" bracket - Can be used with and without start capacitor motors from 1/12 to 1/5 hp, up to 4.05 Amp max.

110 to 125 VAC Solid-state Hardstart Relay, includes relay, overload, start and run capacitor. Used on refrigeration systems without run capacitors. Rated for 1/12 HP to 1/5 HP compressors. Maximum RLA 4.05 Amps. This kit includes a new run capacitor. - Prevents low voltage starting problems - Ideal solution for replacing all four components in a system with a run capacitor - Designed for modern high efficiency compressors - Helps older compressors start and run cooler

All combinations are pre-wire - Fastest cool down time of any solid state relays - PO series installs on compressors with "pin-type" terminals - Can be used with and without capacitor

R7-RB25 Blower Part - 1/40HP - 1.00A - 1/1550 RPM - 130CFM - 1.50"×5/16" Shaft - 92-A8602 Bracket Part - 66-A508216 Blower Part - 5 1/16" Dia - 2 5/32" Width - 5/16" Bore - CW Rot

AXIAL FAN - 230 CFM , 42W, 115V, 3400 RPM. Die-cast Aluminum Housing, Shaded Pole Motor. Ball Bearing, Impeller: Plastic, Connection: Wire Leads

Locked rotor protection eliminates start winding overheating - PRO series installs on "pin-type" terminal - Can be used with and without start capacitor motors from 1/4 to 1/3 hp