Conduit & Fittings

The Intermatic PX300 300 watt safety transformer is specifically designed to supply 12 volts to pool/spa lights, submersible fixtures and outdoor garden lights. A grounded shield between the primary and secondary windings assures safe operation and the built-in circuit protection will disconnect power to the transformer in case of defect or overload. Features ground shield.

The Intermatic PX600 600 watt safety transformer is specifically designed to supply 12 volts to pool/spa lights, submersible fixtures and outdoor garden lights. A grounded shield between the primary and secondary windings assures safe operation and the built-in circuit protection will disconnect power to the transformer in case of defect or overload. Features ground shield.

*** Replace Obsolete model PX600S

The Intermatic PX100S 100 watt safety transformer is specifically designed to supply 12 volts to pool/spa lights, submersible fixtures and outdoor garden lights. A grounded shield between the primary and secondary windings assures safe operation and the built-in circuit protection will disconnect power to the transformer in case of defect or overload. Features ground shield.

The Intermatic PX300S 300 watt safety transformer is specifically designed to supply 12 volts to pool/spa lights, submersible fixtures and outdoor garden lights. A grounded shield between the primary and secondary windings assures safe operation and the built-in circuit protection will disconnect power to the transformer in case of defect or overload. Features ground shield.

0.25Amps - 208/230Volts - 1900RPM - 1/300HP - 0.40Stack - CCW Rotation - 1.3x0.1811Shaft - C-ring groove, Cord&spade terminal

0.20Amps - 120/240 Volts - 2100RPM - 1/250 HP - 0.40 Stack - CCW Rotation - 1.3x0.1811Shaft

0.50Amps - 115Volts - 3000RPM - 1/125HP - 0.65Stack - CCW Rotation - 1.3''x3/16'' Shaft - KIT-Cord& plug c/w two fan blades & mounting kit

0.45/0.25Amps - 120/240Volts - 3000RPM - 1/150HP - 0.63Stack - CCWRotation - 1.5''x3/16''Shaft - KIT-Cord & plug c/w two fan blades & mounting kit

0.6/0.4Amps - 115Volts - 2/3000 RPM - 1/110HP - 0.63''Body - CW Rotation - 1.25''x3/16''Shaft - Wire leads - two speed - c/w two fan blades & mounting kit

0.85Amps - 115Volts - 3000RPM - 1/70HP - 0.875'' Body - CCW Rotation - 2.1''x7/32'' Shaft - Cord & plug

Voltage:18-30VAC

1 Amp Max

40 mA Min.

10 Amp Inrush

Adjustable time delay 12-390 seconds

Dimensions: 2"×3"

Voltage:18-30VAC; 1 Amp Max; 40 mA Min. ; 10 Amp Inrush; Time Delays Adjustable; On - 1-180 seconds; Off - 12-390 seconds; Dimensions: 2"×3"

Voltage:18-30VAC

N.O.: 20 Amps @ 240VAC

N.C.: 20 amps @ 240VAC

Time Delays Fixed

On - 1 second

Off - 60 seconds

Dimensions: 2.5"×2.5"

Voltage Range: 18-30 VAC

Contact Ratings: Heat/cool speed

• N.O.: 20 amps @ 240 VAC
• N.C.: 10 amps @ 240 VAC

Time Delays:

• Blower ON delay: 30 Seconds
• Blower OFF delay: 90,120,150,180 seconds

Voltage Range: 18-30 VAC

Contact Ratings:

• N.O.: 20 amps
• N.C.: 10 amps

Time Delays:

• Heat ON delay: 75 Seconds
• Heat OFF delay: 105 seconds
• Cool OFF delay: 90 seconds

Voltage Range: 18-30 VAC
Output: 2 amps @ 240 VAC
Time Delays:

• Blower OFF delay: 60 seconds

Voltage Range: 18-30 VAC
Contact Ratings:
       Y out: 1.5 amps
       Fan: 2 amps
       Elec. Heat Relay: 30 amps @ 240 VAC
Time Delays: Blower OFF delay: 60-240 seconds

Voltage Range: 18-30 VAC

Contact Ratings:

• High: 20 amps @ 240 VAC
• Low: 10 amps @ 240 VAC

Time Delays:

• Heat ON delay: 60 Seconds
• Heat OFF delay: 60-240 seconds
• Cool OFF delay: 90 seconds

Voltage Range: 18-30 VAC

Contact Ratings:

• Fan: 20 amps @ 240 VAC
• Inducer Fan: 2 amps

Time Delays:

• Heat ON delay: 60 Seconds
• Heat OFF delay: 120,150,180 seconds
• Cool OFF delay: 90 seconds