Conduit & Fittings

Conventional Fire Alarm Control Panel, Red - 10 Class B IDCs and 4 Class B NACs, 7.0A NAC power, (Pairs of IDCs and NACs convertible to single Class A circuits), 120VAC power source, 24VDC output

Conventional Fire Alarm Control Panel, Red - 5 Class B IDCs and 2 Class B NACs, 3.5A NAC Power, 120V, 24Vdc Output, French Canada

Conventional Fire Alarm Control Panel, Red - 5 Class B IDCs and 2 Class B NACs, 3.5A NAC power, (Pairs of IDCs and NACs convenible to single Class A circuits), upload/download DACT/modem, 120VAC power source, 24VDC output

Conventional Fire Alarm Control Panel, Red - 5 Class B IDCs and 2 Class B NACs, 3.5A NAC power, (Pairs of IDCs and NACs convertible to single Class A circuits) , 120VAC power source, 24VDC output

Edwards 5602A - Heat Detector - Combination Fixed Temperature and Rate of Rise 194°F (90°C) FT/RR

Edwards 5601A - Heat Detector - Combination Fixed Temperature and Rate of Rise 135°F (57°C)

Edwards MPSR1-S45W-GE - Weatherproof Fire Alarm Station -  Key reset - Terminal connections - Backbox included

Edwards GC-HDVM - GENESIS Temporal/Steady Ceiling Horn-Strobe - White - Selectable 15 - 30 - 75 - Or 95 cd Output - Selectable High/Low dB Output

Edwards C2M-PDC - Fire Protection Equipment - Smoke Detector - Photoelectric - 2-wire - CleanMe® - 12-24V

Edwards FX-64RD - Intelligent fire alarm systems FX series - Includes a two-line dialer - two NACs - Red door - surface mount enclosure

Four loop system with one 250-point loop installed, 1,000 point capacity max. Four NACs, Red door, surface mount enclosure, 110V, Canada

Metal sampling tube - Duct width 3 to 4ft

The RTS2 multi-signaling accessories are used along with InnovairFlex® 4-wire conventional duct smoke detectors. These include a key switch that can be used to select one of two connected sensors to be tested/reset, or both by a push button switch - 85dBa @ 10 Feet - 14 to 22 AWG - 85 dB @ 10 Feet

The RTS2-AOS multi-signaling accessories are used along with InnovairFlex® 4-wire conventional duct smoke detectors. These include a key switch that can be used to select one of two connected sensors to be tested/reset, or both by a push button switch - 85dBa @ 10 Feet - 14 to 22 AWG - 85 dB @ 10 Feet

The D4120W 4-wire photoelectric duct smoke detector features a waterproof, pivoting housing that fits both square and rectangular footprints and mounts to round or rectangular ductwork - Backward compatible with existing accessories - Two DPDT relay contacts - Built-in short circuit protection - Field selectableconfiguration settings - Easy access Test/Reset button - High contrast terminal designations - Plug-in sensor - Increased wiring space

The D4120 4-wire photoelectric duct smoke detector features a pivoting housing that fits both square and rectangular footprints and mounts to round or rectangular ductwork. This unit senses smoke in the most challenging conditions. Plug-in sensor head off - Two DPDT relay contacts - High contrast terminal designations - Built-in short circuit protection - Increased wiring space - Easy access Test/Reset button

Edwards 5624A - Heat Detector - Dual circuit heat detectors - Fixed Temperature 194°F (90°C)

Edwards 5623A - Heat Detector - Dual circuit heat detectors - Fixed Temperature 135°F (57°C)

Edwards 5622A - Heat Detector - Dual Circuit Combination Fixed Temperature and Rate of Rise 194°F(90°C) FT/RR