Conduit & Fittings

Doors and Entrance control,Range 12 m,Modulated, infrared light.Supply voltage: 10 to 30 VDC,LED for output indication or power supply,Protection: reverse polarity, short circuit, transients.Cable versions.

Housing: 10 x 30 x 20 mm - Sensitivity adjustment by Teach-In programming - Modulated, red light 660 nm - Supply voltage: 10 to 30 VDC - Make or break switching function programmable - LED indication for output, stability and power ON - Remote teach features

Range: 3m - Modulated red light - Supply voltage: 10 to 40 VDC - Make and break switching function, LED indication - Protection: Reverse polarity, short-circuit, transients - High immunity to ambient light - Cable: PVC, grey, 2m

Red Background suppression sensor with IO-Link with a adjustable distance of 25 to 200 mm, either by trimmer or via IO-Link.Application functions: Pattern Recognition, Speed & Length, Divider function and Object & Gap Monitoring.Neighbour Immunity, selectable up to 3 sensors.Easy customization to specific OEM requests by use of the build in IO-Link functionalities.The output can be operated either as a standard switching output or in IO-Link mode.Fully configurable via output IO-Link v 1.1. Electrical outputs can be configured as PNP / NPN / Push-Pull / External input, normally open or normally closed.Timer functions can be set, such as ON-delay, Offdelay, and one shots.Logging functions: Temperatures, detecting counter, power cycles and operating hours.Detection modes Single point, two point, windows and foreground suppression (FGS) mode.Logic functions: AND, OR, XOR and Gated SR-FF. Analogue output: In IO-Link mode the sensor will generate 16 bit analogue process data output representing various selectable process data such as received signal level.

Miniature Sensor Range: 5m (Radial) - Sensitivity adjustment by potentiometer - Modulated, infrared light 850 nm - Supply voltage: 10 to 30 VDC - Degree of protection: IP67, IP69K - LED indication for output, stability and power ON - Protection: reverse polarity, short circuit and transients - Plug: M12, 4-pin

Miniature sensor range, Range:1.0 m.Sensitivity adjustment by potentiometer,Modulated, infrared light 617 nm.Supply voltage: 10 to 30 VDC,Output: 100 mA,NPN preset.Make and break switching function,LED indication for output, stability and power ON.Protection: reverse polarity, short circuit and transients,Cable versions.Excellent EMC performance.The visible red light makes alignment very easy.Power supply necessary only on one side of the application.Ecolab.

Housing: 10 x 30 x 20 mm - Sensitivity adjustment by Teach-In programming - Modulated, Infraredred light 880 nm - Supply voltage: 10 to 30 VDC - Make and break switching function programmable - LED indication for output, stability and power ON - Dust alarm output

Miniature sensor range, Range:200mm.Sensitivity adjustment by potentiometer,Modulated, infrared light 850 nm.Supply voltage: 10 to 30 VDC,Output: 100 mA,PNP preset.Make and break switching function,LED indication for output, stability and power ON.Protection: reverse polarity, short circuit and transients,cable versions.Excellent EMC performance.The extremely wide-angled light beam eliminates false detection due to e.g. large holes in a PCB.Ecolab.

Miniature Sensor Range: 1 m (Axial) - Sensitivity adjustment by potentiometer - Modulated, red light 625 nm - Supply voltage: 10 to 30 VDC - Degree of protection IP67, IP69K - LED indication for output and power ON - Protection: reverse polarity, short circuit and transients - Cable: PVC, grey, 2m

Doors and Entrance control,Range 12 m,Modulated, infrared light.Supply voltage: 10 to 30 VDC,Output: 100 mA, NPN type.Make or break switching,LED for output indication or power supply,Protection: reverse polarity, short circuit, transients.M8 Connector.

Housing: 25 x 107.5 x45 mm - Accurate & stable distance adjustment - Modulated, infrared light 850 nm - Supply voltage: 10 to 30 VDC - Output: 200 mA, NPN or PNP preset - Make or break switching function selectable - Adjustable ON- / OFF delay, 1–16 sec. - Remote test feature (mute)

Plastic Rectangular Housing - Back Trimmer - Infrared Light - Selectable functions: NPN, PNP, Push-Pull, External Input (only pin 2) or External teach input (only pin 2) - Selectable: N.O. or N.C. - Plug: M8, 4-pin, male

Range: 2.0m - Modulated red light, polarized - Supply voltage: 10 to 40 VDC - Make and break switching function, LED indication - Protection: Reverse polarity, short-circuit, transients - Improved immunity to reflecting surfaces - Plug: M12 x 1

Housing: 10 x 30 x 20 mm - Sensitivity adjustment by potentiometer - Modulated, infrared light 850 nm - Supply voltage: 10 to 30 VDC - Make and break switching function - LED indication for output, stability and power ON - Protection: Short-circuit, reverse polarity and transients

Background Suppression PointSpot sensor with IO-Link with a adjustable distance of 25 to 250 mm, either by trimmer or via IO-Link.Application functions: Pattern Recognition, Speed & Length, Divider function and Object & Gap Monitoring.Neighbour Immunity, selectable up to 3 sensors.Easy customization to specific OEM requests by use of the build in IO-Link functionalities. The output can be operated either as a standard switching output or in IO-Link mode.Fully configurable via output IO-Link v 1.1. Electrical outputs can be configured as PNP / NPN / Push-Pull / External input, normally open or normally closed.Timer functions can be set, such as ON-delay, Off-delay, and one shots.Logging functions: Temperatures, detecting counter, power cycles and operating hours.Detection modes Single point, two point, windows and foreground suppression (FGS) mode.Logic functions: AND, OR, XOR and Gated SR-FF.Analogue output: In IO-Link mode the sensor will generate 16 bit analogue process data output
representing various selectable process data such as received signal level.

Miniature Sensor Range: 5m (Radial) - Sensitivity adjustment by potentiometer - Modulated, infrared light 850 nm - Supply voltage: 10 to 30 VDC - Degree of protection: IP67, IP69K - LED indication for output, stability and power ON - Protection: reverse polarity, short circuit and transients - Cable: PVC, grey, 2m

Red or infrared sensor with IO-Link with a adjustable distance of 25 to 200 mm, either by trimmer or via IO-Link.Application functions: Pattern Recognition, Speed &Length, Divider function and Object & Gap Monitoring.Neighbour Immunity, selectable up to 3 sensors.Easy customization to specific OEM requests by use of the build in IO-Link functionalities.The output can be operated either as a standard switching output or in IO-Link mode.Fully configurable via output IO-Link v 1.1. Electrical outputs can be configured as PNP / NPN / Push-Pull /External input, normally open or normally closed.Timer functions can be set, such as ON-delay, Off-delay, and one shots.Logging functions: Temperatures, detecting counter,power cycles and operating hours.Detection modes Single point, two point, windows and foreground suppression (FGS) mode. Analogue output: In IO-Link mode the sensor will generate 16 bit analogue process data output representing various selectable process data such as received signal level.

Housing: 10 x 30 x 20 mm - Sensitivity adjustment by Teach-In programming - Modulated, Infraredred light 880 nm - Supply voltage: 10 to 30 VDC - LED indication for output, stability and power ON - Mute function (sensor blanking)

Range 6 meters, Modulated, red Light, Polarized, Make and Break Switching Function , LED-indication for output,stability and power ON. Multi supply voltage: 10 to 30 VDC. NO and NC Output, PMMA/ABS Housing IP67, Plug Connection.