Conduit & Fittings

Housing with Thread Length of 50 mm - Long Body - Sensing Distance 14mm (Extended Range) - Rated Operational Voltage: 8 to 60 VDC (ripple included) - E1-Type Approved for Mobile Equipment - Protection: Short-circuit, inductive load, overload, reverse polarity and transients

Cylindrical Housing with Threaded Barrel - Stainless Steel Housing - 10 to 36 VDC (ripple included) - Flush Mounting - 2m PVC Cable - NPN-normally open Output - Protection: Short-circuit, reverse polarity, transients and overload

Cylindrical Nickel-Plated Brass Housing - Short Housing with Thread Length of 30 mm - 10 to 36 VDC (ripple included) - Flush Mounting - Increased Operating Distance: 12mm - Normally Closed - Protection: reverse polarity, short circuit, transients - 2m Grey PVC Cable

Cylindrical Nickel-Plated Brass Housing - Standard Range - Rated operational voltage: 10 to 36 VDC (ripple included) - LED indication for output ON - Protection: reverse polarity, short circuit, transients - 2m PVC Cable

Cylindrical Nickel-Plated Brass Housing - Short Housing with Thread Length of 35 mm - 10 to 36 VDC (ripple included) - Flush Mounting - Sensing Distance: 22mm - Normally Closed - Protection: reverse polarity, short circuit, transients - 2m Grey PVC Cable

Stainless Steel Housing - 50mm Thread - Power supply: 10 to 40 VDC - Flush Mounting - Output: Transistor NPN, Normally Open (NO) Switching - LED-indication for output ON - Protection: Short-circuit and reverse polarity - Plug: M12 x 1

Cylindrical Nickel-Plated Brass Housing - Short Housing with Thread Length of 30 mm - 10 to 36 VDC (ripple included) - Flush Mounting - Sensing Distance: 15mm - N.O. and N.C. - Protection: Short-circuit, reverse polarity and transients - 2m Grey PVC Cable

Capacitive proximity switches with sensing distance of 8 mm flush mounted in metal. 4-wire DC output with both make (NO) and break (NC) switching. Grey M18 PVC housing with 2 m PVC cable.

Rectangular Plastic Housing Length 34mm - Neutral - Flush Mounting - Liquid Level - Foreground Suppression - NPN, N.O. Output - Pigtail Connection: 0.3m, M8, 4-pin, male

Rated operational voltage: 10-40 VDC - Adjustable sensing distance 3-12 mm - Make and break switching function - High noise immunity - Non-flush types - Cable versions

- For temperature applications, from -196°C to +180°C - Sensor diameter: M30, teflon and stainless steel - Adjustable sensing distance: 4 to 15 mm, factory set for 10 mm - Power supply: 10 to 40 VDC - Protection: Reverse polarity, short-circuit, transients - Separate amplifier and sensor

Flat Pack Polycarbonate Housing - Adjustable sensing distance 4-25 mm - Rated operational voltage: 10-40 VDC - Make (NO) and Break (NC) Switching - LED indication - Plug: M12 x 1

Repeat accuracy: ≤ 5%; Rated operational current: ≤ 200 mA (continuous); Capacitive load: 100 nF; Frequency of operating cycles: 50 Hz; Rated insulation voltage: 1 kVAC (rms) IEC protection class III; Protection: Short-circuit, reverse polarity, transients

Rectangular Plastic Housing Length 34mm - Neutral - Flush Mounting - Liquid Level - Foreground Suppression - NPN, N.O. Output - Cable: 2 m, 4-wire 4 x 0.14 mm2, Ø = 3.4 mm, PVC

Housing diameter: 30mm - Housing material: Thermoplastic Polyester - Rated operating distance: 0-25 mm - Rated operational voltage: 10-40 VDC - Output Switching Function: N.O. and N.C. - Cable Connection

Capacitive proximity switches with either sensing distance 8 mm flush mounted in metal or sensing distance 12 mm non-flush mounted. 4-wire DC output with both make (NO) and break (NC) switching. Black M18 polypropylene housing with 2 m cable.

Rectangular Plastic Housing Length 34mm - Neutral - Flush Mounting - Liquid Level - Foreground Suppression - NPN, N.C. Output - Pigtail Connection: 0.3m, M8, 4-pin, male

Repeat accuracy: ≤ 5%; Rated operational current: ≤ 200 mA (continuous); Capacitive load: 100 nF; Frequency of operating cycles: 50 Hz; Rated insulation voltage: 1 kVAC (rms) IEC protection class III; Protection: Short-circuit, reverse polarity, transients

Rated operational voltage: 10-40 VDC - Adjustable sensing distance 3-12 mm - Make and break switching function - High noise immunity - Non-flush types - Cable versions - ATEX zone 22 dust (The cable must not be exposed to a pulling force)