Conduit & Fittings

Internal thread provides easy removal and serviceability, Installs flush or below the base surface, Suitable for redundant non-structural systems on cracked and non-cracked concrete, Fire resistance class R30-R120 for design of anchorages under exposure to fire

* List Price is for Whole Pack of 100 Pieces

Internal thread provides easy removal and serviceability, Installs flush or below the base surface, Suitable for redundant non-structural systems on cracked and non-cracked concrete, Fire resistance class R30-R120 for design of anchorages under exposure to fire

* List Price is for Whole Pack of 50 Pieces

Internal thread provides easy removal and serviceability, Installs flush or below the base surface, Suitable for redundant non-structural systems on cracked and non-cracked concrete, Fire resistance class R30-R120 for design of anchorages under exposure to fire

* List Price is for Whole Pack of 50 Pieces

Pre-riveted retainer strap is easily bent into position, Requires only a hammer to install, 4WN washer wing nut included. 1/4" Screw Diameter, 9/16" Screw Length, Static Load 75 lb

* List Price is for Whole Pack of 50 Pieces

Pre-riveted retainer strap is easily bent into position, Requires only a hammer to install, 4WN washer wing nut included. 1/4" Screw Diameter, 9/16" Screw Length, Static Load 75 lb

* List Price is for Whole Pack of 50 Pieces

Pre-riveted retainer strap is easily bent into position, Requires only a hammer to install, 4WN washer wing nut included. 1/4" Screw Diameter, 9/16" Screw Length, Static Load 75 lb

* List Price is for Whole Pack of 50 Pieces

Pre-riveted retainer strap is easily bent into position, Suspends threaded rod from beam flanges, Threaded rod hanger can swivel to provide a vertical dropdown, Requires only a hammer to install ,200 lb Static Load

* List Price is for Whole Pack of 50 Pieces

Pre-riveted retainer strap is easily bent into position, Suspends threaded rod from beam flanges, Threaded rod hanger can swivel to provide a vertical dropdown, Requires only a hammer to install ,200 lb Static Load

* List Price is for Whole Pack of 50 Pieces

H-MSMR Conduit to Flange Clip with Retainer, Side Mount, 1/2", 3/4" EMT, 5/16"–1/2" Flange, 25 lb Static Load

* List Price is for Whole Pack of 50 Pieces

Includes two punches with springs, nuts and washers. 0.410" Hole Size

Easy install, Use TDHP perforation tool to punch hole in decking.

* List Price is for Whole Pack of 50 Pieces

Easy install, Use TDHP perforation tool to punch hole in decking.

* List Price is for Whole Pack of 50 Pieces

Universal Beam Clamp, Electrogalvanized, 1/4" Rod, 13/16" Max Flange, 1/4" Hole, Torque: 40 ft lb, Static Load 1: 250 lb, Static Load 2: 100 lb

* List Price is for Whole Pack of 100 Pieces

Threaded hole on back and bottom, 200 lb Static Load

* List Price is for Whole Pack of 25 Pieces

Pre-riveted retainer strap is easily bent into position, Suspends threaded rod from beam flanges, Threaded rod hanger can swivel to provide a vertical dropdown, Requires only a hammer to install ,200 lb Static Load

* List Price is for Whole Pack of 50 Pieces

Pre-riveted retainer strap is easily bent into position, Suspends threaded rod from beam flanges, Threaded rod hanger can swivel to provide a vertical dropdown, Requires only a hammer to install ,200 lb Static Load

* List Price is for Whole Pack of 50 Pieces

Pre-riveted retainer strap is easily bent into position, Suspends threaded rod from beam flanges, Threaded rod hanger can swivel to provide a vertical dropdown, Requires only a hammer to install ,200 lb Static Load

* List Price is for Whole Pack of 50 Pieces

H-MSMR Conduit to Flange Clip with Retainer - Side Mount - 1" EMT - 5/16"–1/2" Flange,25 lb Static Load

* List Price is for Whole Pack of 50 Pieces

Meets the requirements of NEC® Section 300.4(E), Supports conduit or pipe 1-1/2" (38 mm) under the roof decking to prevent potential damage from nails or screws

* List Price is for Whole Pack of 100 Pieces