Conduit & Fittings

One piece break apart strut clamp (1/2" thru 4" pipe size), Includes thread impression and captured screw (1/2" thru 4" pipe size), Fits into open side of strut channel, Conforms with Manufacturers Standardization Society (MSS) SP-58 (Type 59). 12 GA Thickness, Static Load 800 lb

* List Price is for Whole Pack of 25 Pieces

One piece break apart strut clamp (1/2" thru 4" pipe size), Includes thread impression and captured screw (1/2" thru 4" pipe size), Fits into open side of strut channel, Conforms with Manufacturers Standardization Society (MSS) SP-58 (Type 59). 12 GA Thickness, Static Load 800 lb

* List Price is for Whole Pack of 25 Pieces

Macrofix Plus LF Low-Friction - 0.984" OD - 3/4" Pipe - 25 mm Plastic Pipe - Thickness: 1/16" - Static Load: 250 lb

* List Price is for Whole Pack of 100 Pieces

Macrofix Plus LF Low-Friction - 1.26" OD - 1" Pipe - 32 mm Plastic Pipe - Thickness: 1/16" - Static Load: 250 lb

* List Price is for Whole Pack of 100 Pieces

One piece break apart strut clamp (1/2" thru 4" pipe size), Includes thread impression and captured screw (1/2" thru 4" pipe size), Fits into open side of strut channel, Conforms with Manufacturers Standardization Society (MSS) SP-58 (Type 59). 12 GA Thickness, Static Load 800 lb

* List Price is for Whole Pack of 25 Pieces

One piece break apart strut clamp (1/2" thru 4" pipe size), Includes thread impression and captured screw (1/2" thru 4" pipe size), Fits into open side of strut channel, Conforms with Manufacturers Standardization Society (MSS) SP-58 (Type 59). 12 GA Thickness, Static Load 800 lb

* List Price is for Whole Pack of 25 Pieces

One piece break apart strut clamp (1/2" thru 4" pipe size), Includes thread impression and captured screw (1/2" thru 4" pipe size), Fits into open side of strut channel, Conforms with Manufacturers Standardization Society (MSS) SP-58 (Type 59). 14 GA Thickness, Static Load 600 lb

* List Price is for Whole Pack of 25 Pieces

Recommended for the suspension of stationary insulated pipe lines, Static Load: 1,430 lb

* List Price is for Whole Pack of 10 Pieces

Recommended for the suspension of stationary non-insulated pipe lines, Flared edges help prevent sharp surfaces from coming into contact with the pipe (1/2" to 2" pipe sizes), Clevis bottom pivots to allow pipe to be fed from either direction, Static Load: 600 lb

* List Price is for Whole Pack of 50 Pieces

Supports pipe or duct from flange with banding or strapping, Static Load 200 lb

* List Price is for Whole Pack of 100 Pieces

Supports pipe or duct from flange with banding or strapping, Static Load 200 lb

* List Price is for Whole Pack of 100 Pieces

Supports pipe or duct from flange with banding or strapping, Pre-measure length of strap, hammer clip on to flange, then trapeze pipe or duct. Static Load 200 lb

* List Price is for Whole Pack of 50 Pieces

Supports pipe or duct from flange with banding or strapping, Pre-measure length of strap, hammer clip on to flange, then trapeze pipe or duct. Static Load 200 lb

* List Price is for Whole Pack of 50 Pieces

Supports pipe or duct from flange with banding or strapping, Pre-measure length of strap, hammer clip on to flange, then trapeze pipe or duct. Static Load 200 lb

* List Price is for Whole Pack of 50 Pieces

Pipe support for general piping applications, Comes complete with 4 nuts (2 installed on each end), Static Load: 6,730 lb

* List Price is for Whole Pack of 5 Pieces

Pipe support for general piping applications, Comes complete with 4 nuts (2 installed on each end), Static Load: 6,730 lb

* List Price is for Whole Pack of 5 Pieces

Pipe support for general piping applications, Comes complete with 4 nuts (2 installed on each end), Static Load: 6,730 lb

* List Price is for Whole Pack of 5 Pieces

Supports pipe or duct from flange with banding or strapping, Static Load 200 lb

* List Price is for Whole Pack of 100 Pieces

Supports pipe or duct with banding or strapping, Complete with shot-fire bracket and pre-assembled drive pin from DEWALT®, Quickly and easily attaches to concrete, steel or composite metal decking, Integrated pin installs easily using powder-actuated or single-shot gas-actuated tools, ICC-ES ESR-2024 evaluation report available for drive pin from DEWALT®. Static Load 100 lb

* List Price is for Whole Pack of 50 Pieces