Conduit & Fittings

IPEX Kwikon Fittings, 1/2 in. PVC Snap-in Male Connector

* List price is for 10 Packs

IPEX Kwikon Fittings, 1/2 in. Polyethylene ENT Form Stubby, Black Color

* List price is for 5 Packs

IPEX Kwikon Fittings, 1/2 in. PVC ENT To EMT Transition Coupling, Snap-on, Screw Type

* List price is for 5 Packs

With our unique Kwikon x Kwikon stub down fitting, the user creates a stub down of ENT without penetrating the form. After the concrete pour the permanently encased fitting will be flush with the bottom of the slab deck, ready to accept the connection of ENT raceway.

IPEX Kwikon Fittings, 1/2 in. Polyethylene 45º ENT Angled Form Stubby, Black Color

* List price is for 5 Packs

IPEX Kwikon Fittings, 1/2 in. PVC Threaded Male Connector with Locknuts

* List price is for 10 Packs

Both styles of stub down fittings are designed for direct connection to ENT on the horizontal by means of our unique six locking tab for concrete encasement Kwikon connection. The flanged base of the threaded 90º stub down offers contractors a NPSC threaded hub connection on the vertical – at the exit point of the slab, allowing for the direct transition to other raceway products.

IPEX Kwikon Fittings, 1/2 in. PVC Coupling, Snap-on, Screw Type

* List price is for 5 Packs

IPEX 1/2 in. x 1500ft. PVC Cor-Line ENT Reels, Blue Stripe, Inside Diameter 0.574'', Outside Diameter 0.840'', Grey Color

IPEX 1/2 in. x 10ft. PVC Cor-Line ENT Sticks, Blue Stripe, Grey Color

IPEX 1/2 in. x 370ft. PVC Cor-Line ENT Coils, Blue Stripe, Inside Diameter 0.574'', Outside Diameter 0.840'', Grey Color

Junction Box Adapters are installed using a standard PVC coupling, offering a trouble-free and reliable PVC connection. In addition to providing a strong connection, the JBA also maximizes the interior box wiring space unlike the use of male adapters (TA).

* List price is for 4 Packs

1/2 inch Diameter PVC O-Ring Expansion Joint, Maximum Length 12 inch, Minimum Length 8 inch, Travel 4 inches

IPEX Scepter Nonmetallic Threaded Strain Relief Connectors Come with ''O'' Ring, Locknut & 4 Grommets

IPEX Scepter 1/2 in. Neoprene O-Ring, For use with TA to obtain a water-tight seal

* List price is for 10 Packs

IPEX Scepter 1/2 in. PVC 45° Standard Elbow Comes with Solvent Bell End, CSA Approval

* List price is for 2 Packs

IPEX Scepter Conduit Fittings, 2 Hole PVC Pipe Strap, 1/2 Inch Size

* List price is for 20 Packs

IPEX Scepter Conduit Fittings, 1/2 in. PVC Socket Molded End Bell, Plug-In Connection

Our Scepter One Piece Expansion Joint (OPEJ) is designed to accommodate thermal expansion and contraction on shorter runs of PVC Conduit. The OPEJ, supplied with a Nitrile O-ring for smooth functioning, is available in sizes from 1/2” to 2”.