Cable / Conduit

May be used for either vertical or horizontal installations, Eliminates need for offset bending conduit, Finger closure, no tools required, Static Load 1: 100 lb, Static Load 2: 25 lb

* List Price is for Whole Pack of 100 Pieces

Supports conduit/pipe or cable from beam flanges, Snap close clip pivots a full 360°, Static Load: 75 lb

* List Price is for Whole Pack of 100 Pieces

Supports conduit/pipe or cable from beam flanges, Snap close clip pivots a full 360°, Static Load: 25 lb

* List Price is for Whole Pack of 100 Pieces

One assembly provides support for electrical box and/or conduit from drop wire or rod, Comes with one conduit clip attached to each side with the ability to attach up to two more per side

* List Price is for Whole Pack of 25 Pieces

Push-in installation of conduit, Eliminates need for offset bending conduit, Complete with shot-fire bracket and pre-assembled drive pin from DEWALT®, Quickly and easily attaches to concrete, steel or composite metal decking, Integrated pin installs easily using powder-actuated or single-shot gas-actuated tools, Ultimate Static Load: 15 lb

* List Price is for Whole Pack of 50 Pieces

Bolt Close Conduit/Pipe Clamp with Shot-Fire Bracket, 0.67"–0.84" Outer Diameter, 1/2" EMT, 1/2" Rigid/Pipe, Static Load 100 lb

* List Price is for Whole Pack of 50 Pieces

Retained bolt and built-in nut means there are less parts to handle or drop, Combo head bolt works with slotted, hex, #3 phillips or #2 robertson drivers. Static Load 1 200 lb, Static Load 2 50 lb, 1.000" – 1.315" Outer Diameter

* List Price is for Whole Pack of 100 Pieces

Retained bolt and built-in nut means there are less parts to handle or drop, Combo head bolt works with slotted, hex, #3 phillips or #2 robertson drivers. Static Load 1 200 lb, Static Load 2 50 lb, 1.000" – 1.315" Outer Diameter

* List Price is for Whole Pack of 100 Pieces

Meets the requirements of NEC® Section 300.4(E), Supports conduit or pipe 1-1/2" (38 mm) under the roof decking to prevent potential damage from nails or screws.

* List Price is for Whole Pack of 50 Pieces

Bolt Close Conduit/Pipe Clamp with Shot-Fire Bracket, 1"–1.315" Outer Diameter, 1" EMT, 1" Rigid/Pipe, Static Load 100 lb

* List Price is for Whole Pack of 50 Pieces

Retained bolt and built-in nut means there are less parts to handle or drop, Combo head bolt works with slotted, hex, #3 phillips or #2 robertson drivers. Static Load 1 200 lb, Static Load 2 50 lb, 1.000" – 1.315" Outer Diameter

* List Price is for Whole Pack of 100 Pieces

Retained bolt and built-in nut means there are less parts to handle or drop, Combo head bolt works with slotted, hex, #3 phillips or #2 robertson drivers. Static Load 1 200 lb, Static Load 2 50 lb, 1.410" – 1.740" Outer Diameter

* List Price is for Whole Pack of 100 Pieces

Bolt Close Conduit/Pipe Clamp with Z Shot-Fire Bracket, 1"–1.315" Outer Diameter, 1" EMT, 1" Rigid/Pipe, Static Load 100 lb

* List Price is for Whole Pack of 50 Pieces

Retained bolt and built-in nut means there are less parts to handle or drop, Combo head bolt works with slotted, hex, #3 phillips or #2 robertson drivers. 1.410" – 1.740" Outer Diameter, Static Load 1 200 lb, Static Load 2 50 lb

* List Price is for Whole Pack of 100 Pieces

Retained bolt and built-in nut means there are less parts to handle or drop, Combo head bolt works with slotted, hex, #3 phillips or #2 robertson drivers. Static Load 1 200 lb, Static Load 2 50 lb, 1.410" – 1.740" Outer Diameter

* List Price is for Whole Pack of 100 Pieces

Retained bolt and built-in nut means there are less parts to handle or drop, Combo head bolt works with slotted, hex, #3 phillips or #2 robertson drivers. Static Load 1 200 lb, Static Load 2 50 lb, 1.750" – 1.900" Outer Diameter

* List Price is for Whole Pack of 50 Pieces

Retained bolt and built-in nut means there are less parts to handle or drop, Combo head bolt works with slotted, hex, #3 phillips or #2 robertson drivers. Static Load 1 200 lb, Static Load 2 50 lb, 1.750" – 1.900" Outer Diameter

* List Price is for Whole Pack of 50 Pieces

Retained bolt and built-in nut means there are less parts to handle or drop, Combo head bolt works with slotted, hex, #3 phillips or #2 robertson drivers. Static Load 1 200 lb, Static Load 2 50 lb, 1.220" – 1.510" Outer Diameter

* List Price is for Whole Pack of 100 Pieces

Meets the requirements of NEC® Section 300.4(E), Supports conduit or pipe 1-1/2" (38 mm) under the roof decking to prevent potential damage from nails or screws.

* List Price is for Whole Pack of 50 Pieces