Static Bonding & Grounding

Equipped With: Copper mobile ground stake; Sectional hammer driver for easy insertion and removal of ground rods; 2 grounding assemblies with 20’ of 3/16” orange PVC coated coiled cable, aluminum ground clamp, and a copper lug; Hard plastic water-tight case with foam.

LE600i StaticSure Portable Static Monitoring Unit - 2’ 18/2 SOW Cord with GAT-PIP Clamp - 20' 18/2 SOW Coiled Cord with REB-IP Clamp - Resistance Setting: 5 Ohms - Environmental Rating: IP65

LE600i StaticSure Portable Static Monitoring Unit - 20' 18/2 SOW Coiled Cord with GAT-PIP Clamp - 2' 18/2 SOW Cord with Lugs - Resistance Setting: 5 Ohms - Environmental Rating: IP65

LE600i StaticSure Portable Static Monitoring Unit - 20' 18/2 SOW Coiled Cord with REB-IP Clamp - 2' 18/2 SOW Cord with Lugs - Resistance Setting: 5 Ohms - Environmental Rating: IP65

LE600i StaticSure Portable Static Monitoring Unit - 2’ 18/2 SOW Cord with REB-IP Clamp - 20' 18/2 SOW Coiled Cord with REB-IP Clamp - Resistance Setting: 5 Ohms - Environmental Rating: IP65

Mounting to a vac truck or bulk liquid truck where long runs of cord are necessary to reach the known ground point.

Mounting to a vac truck or bulk liquid truck where long runs of cord are necessary to reach the known ground point.

Mounting to a vac truck or bulk liquid truck where long runs of cord are necessary to reach the known ground point.

Mounting to a vac truck or bulk liquid truck where long runs of cord are necessary to reach the known ground point.

- Bronze G40-PMIP1 Clamp - 5 Ohm set resistance point - 110V power required, 3/4'' NPT connection. (220V available) - Moisture drain

- Aluminum GAT-PIP2 Clamp - 5 Ohm set resistance point - 110V power required, 3/4'' NPT connection. (220V available) - Moisture drain

- Aluminum GAT-PIP2 Clamp - 5 Ohm set resistance point - 110V power required, 3/4'' NPT connection. (220V available) - Moisture drain

- Aluminum GAT-PIP2 Clamp - 5 Ohm set resistance point - 110V power required, 3/4'' NPT connection. (220V available) - Moisture drain

- Aluminum GAT-PIP2 Clamp - 5 Ohm set resistance point - 110V power required, 3/4'' NPT connection. (220V available) - Moisture drain

- Bronze G40-PMIP1 Clamp - 5 Ohm set resistance point - 110V power required, 3/4'' NPT connection. (220V available) - Moisture drain

- Bronze G40-PMIP1 Clamp - 5 Ohm set resistance point - 110V power required, 3/4'' NPT connection. (220V available) - Moisture drain

- Bronze G40-PMIP1 Clamp - 5 Ohm set resistance point - 110V power required, 3/4'' NPT connection. (220V available) - Moisture drain

Deadman Monitoring System with 50' 16/2 Straight SOOW Cable, Compact Deadman Switch, and Green/Red Indicator Lights

Deadman monitoring system on LE9500 series cable reel with 100' of 16/2 straight SOOW cable and compact deadman switch (no indicator lights)