discontinued

Optanium High Efficiency Electronic Instant Start T8 Fluorescent Ballasts.For (1/2) x F17T8, F25T8, F32T8, F32T8/ES(25W/28W/30W), F40T8  Fluorescent Lamps. 120-277,50/60 HZ. Parallel Lamp Connection.

* This item has been discontinued. Please refer to the link below for the replacement suggested by the supplier

https://www.bulbspro.com/iopa2p32n35m.html 

Max. Output Power: 75W, Input Voltage: 120-277V, Output Current: 0.1-0.70A, Output Voltage: 54-107V, Power Factor @ Max.Load : >0.95, Outdoor Dimming LED Driver  , Envir.Protection Rating: UL damp & dry

* This item has been discontinued. Please refer to the link below for the replacement suggested by the supplier

https://www.bulbspro.com/xi075c070v105cny2m.html

Philips Advance IMH39GLFM - Electronic Ballast For 39W Metal Halide Lamps With Side Exit Leads And Mounting Feet - 120-277V - ANSI Code C130/M130 Minimum Starting Temp -20°C/-4°F

Max. Output Power: 48W, Input Voltage: 120-277V, Output Current: 2.0A, Output Voltage: 24V, Min Power Factor : 0.9, Outdoor Dimming LED Driver,  Envir.Protection Rating: UL damp & dry

* This item has been discontinued. Please refer to the link below for the replacement suggested by the supplier

https://www.bulbspro.com/ledinta0024v41dlom.html

Centium Electronic Programmed Start T5 Fluorescent Ballasts. For (1/2) x F24T5/HO, F39T5/HO, FC12T5, FC9T5, FT24W/2G11,FT36W/2G11, (1) x FT40W/2G11/RS, (2) x (1) FC9T5 & (1) FC12T5. 120-277V,50/60 HZ. Series Lamp Connection.

Philips Advance IMH39ABLSID - Electronic Ballast For 39W Metal Halide Lamps With Bottom Exit Leads And Mounting Studs - 120-277V - ANSI Code M130 Minimum Starting Temp -20°C/-5°F.

* Ballast will not Operate if Insulation Detector is Absent or Shorted.

Philips Advance 71A8192500D - High Pressure Sodium - C & C Ballasts - 150W - S55 ANSI Code - 120/208/240/277V - 90% Power Fact - HX-HPF Circuit Type - 2 Feet Ballast to Lamp Distance - 105°C Temp Rating

* This item has been discontinued. Please refer to the link below for the replacement we suggested 

https://www.bulbspro.com/esza00w150.html

Max. Output Power: 72W, Input Voltage: 120-277V, Output Current: 0.10~3.0A, Output Voltage: 24V, Min Power Factor : 0.9, Outdoor Dimming LED Driver , Envir.Protection Rating: UL damp & dry

* This item has been discontinued. Please refer to the link below for the replacement suggested by the supplier

https://www.bulbspro.com/ledinta0024v41dlom.html

Philips Advance IMH39GBLSM - Electronic Ballast For 39W Metal Halide Lamps With Bottom Exit Leads And Mounting Studs - 120-277V - ANSI Code C130/M130 Minimum Starting Temp -20°C/-4°F

* This is a discontinued model and is sold while quantity last only.