discontinued

Output Voltage 75V - 215V, Output Current 70ma - 700mA, Max Output Power 150Watt, Analog 0 to 10 Vdc Dimming with Programmable Tuning, Thermal Foldback Protection, High Range Input Voltage 347 – 480 Vac, Constant Current LED Driver.

* This item has been discontinued. Please refer to the link below for the replacement we suggested

https://www.bulbspro.com/xh150c070v210fnf1m.html

Standard case - electronic low frequency square wave ballast for 150W metal halide lamps with 120V "tap" for 3 or 4-wire self heating thermal protectors (IDTPs). Top Lead Exit, Mounted by Stud. Pulse Start Ignition 120-277V, Line Voltage Must be Reset after Abnormal Operation Shutdown Circuit.

1500mA Programmable LED Driver, Output Voltage 16V to 37V @ 1.50Amps, 16V to 56V @ 0.98Amps, Max. Output 55W, Universal (120-277V) Input Voltage, Class 2, 55W Constant Current Output with 0-10V dimming, Full featured programmability with Wireless Programming.

This item is discontinued. The substitue is Advance XI054C150V054BST1M, please let us know if you want to buy Advance XI054C150V054BST1M to replace Everline D10CC55UNVTZ‐C, so that we can program it correctly before we ship it to you. 

Universal Lighting Everline Led Driver D23CC90UNVT‐F, Output 18V - 40V, 210mA - 2300mA, Maximum 90Watt, Analog 0 to 10 vDC Voltage Control with Tuning Interface, Class 2 Output, Input voltage 120 – 277 Vac, Constant Current LED Driver.

This Everline LED Driver can be configured to set its current output to a selected fraction of their maximum rated design level. This function is called tuning (or also high‐end trim) and it can be implemented with the LDTC01A using the Selector rotary switches. Tuning assignments are stored in driver memory and are not lost when power is removed. All factory produced drivers are tuned to maximum output unless otherwise noted on the label.

* This is a discontinued model and is sold while quantity last

Universal Lighting M3912CK-7EUN-F for 1 x 35W or 39W - Electronic Metal Halide Ballast - Operates M/C130 Lamps - Input 120 Volts - Power Factor: >95% - Ballast Factor: 1.00

* This item has been discontinued. Please refer to the link below for the replacement we suggested

https://www.bulbspro.com/rmh39kblsm.html

Universal Lighting D700C120UVT-VF10C - 700mA LED Driver - Output Power 120W - 0-10V Dimming w/ Tunable Output - 12V Power source for Active cooling device - Thermal Foldback Control - Feet Mounting

Everline D10CC55UNVTZ‐C, Output Voltage 19V - 53V, Output Current 11mA - 1050mA, Max Output Power 55Watt, Analog 0 to 10 vDC Voltage Control, Class 2 Output, Universal input voltage 120 – 277 Vac, Wire Trap / Plug‐in Connectors for 18 AWG Solid Wire, Constant Current LED Driver. 

This item is discontinued. The substitue is Advance XI054C150V054BST1M, please let us know if you want to buy Advance XI054C150V054BST1M to replace Everline D10CC55UNVTZ‐C, so that we can program it correctly before we ship it to you. 

Universal Lighting M15012-27CK-5EU-F, For 1 x 150W Metal Halide Lamp - Electronic Metal Halide Ballast - Operates M/C102/E, M/C142/E Lamps - 120/277 Volts - Power Factor: >95% - Ballast Factor: 1.00

Universal - B332PUNVHE-A010C - (3) F32T8 - 120-277V - High Frequency Electronic Ballast

Output 700mA, 28 - 44Vdc, Max Output Power 30Watt, Class 2, Input 120 – 277 Vac, Side Lead Exit, Universal Lighting Everline (VD) series Constant Current LED Driver

* This item has been discontinued. Please refer to the link below for the replacement suggested by the supplier

https://www.bulbspro.com/d700c36unvslgb.html

Everline D12V60UNV‐A, Output 12Vdc, 5.0A, Maximum 60Watt, Class 2 Output Led Driver, Universal Input Voltage 120-277Vac, Constant Voltage LED Driver.

*This model has been discontinued. The substitute is Meanwell LPV-60-12.

Dimmable LED Driver with 4 Output Channels. 185mA 7.4Watt per Channel, Class 2 Output, Input Voltage 120~277Vac, Max 35Watt Power. 0-10V Dimming Interface and Step Dimming 100% / 50% Maximum dim level,  Output connector: Wago ‐ 873‐103/VE00‐500

Triad C2642/347MES – Series Programmed Rapid Start - 347V - Ballast Factor 1.0 - Power Factor >0.98 - Min. Temp. Rating 0 Deg. F , Multi Exit Means Side Lead Wiring and Bottom Lead Wiring both Available, Mounting Studs on the Bottom

* This item has been discontinued. The following link is the replacement we suggested.

Sola E-724-J-242 Electronic Ballast

Output Voltage 50V - 143V, Output Current 105mA - 1050mA, Max Output Power 150Watt, Analog 0 to 10 vDC Voltage Dimming to 10% with Tuning Interface, High Input Voltage120 - 277Vac, Constant Current LED Driver, Bottom Lead Exit with Studs

This Everline LED Driver can be configured to set its current output to a selected fraction of their maximum rated design level. This function is called tuning (or also high‐end trim) and it can be implemented with the LDTC01A using the Selector rotary switches. Tuning assignments are stored in driver memory and are not lost when power is removed. All factory produced drivers are tuned to maximum output unless otherwise noted on the label.

LED Driver with Selectable Output Current 550/600/650/700mA (Default 700mA) via Switches. 0-10V dimming to 5% with dim-to-off. Input Voltage 120-277Vac, Output Voltage 35V to 52V, Max. Output 36Watt.

Everline D15CC55UNVTW‐C, Output 13V-37Vdc, Maximum Output 56Vdc, 45mA-1500mA, Maximum 55Watt, Analog 0 to 10 vDC Voltage Control with Tuning Interface, Class 2 Output, Universal input voltage 120 – 277 Vac, Constant Current LED Driver.

This Everline LED Driver can be configured to set its current output to a selected fraction of their maximum rated design level. This function is called tuning (or also high‐end trim) and it can be implemented with the LDTC01A using the Selector rotary switches. Tuning assignments are stored in driver memory and are not lost when power is removed. All factory produced drivers are tuned to maximum output unless otherwise noted on the label.