discontinued

Etlin Daniels - Splicers/Reducers - Aluminum - 600 VAC - 350A

Etlin Daniels CF2GX7-HSM - CF SOCKET - 13W HORIZONTAL 2 HOLE SCREW MOUNT - 75W - 600V

* This item has been discontinued. Please refer to the link below for the replacement we suggested 

https://www.bulbspro.com/sc-2gx7-4-pin-cfl-s-e-5-13w-horizontal-screw-mount-socket-2gx7-2g7-base.html

Etlin Daniels DF-14 - G8.5 HALOGEN SKT SCREW MOUNT PUSH IN TERM - 600W - 600V

Etlin Daniels FL500-W1 - SOCKET - BUTT ON - WHITE - T8/T12 - 9"T LEADS WITH CLIP - 660W - 600V

Etlin Daniels FL500-W1-T - SOCKET - BUTT ON - WHITE T8/T12 - 9" LEADS - 0.125" MOUNT HOLES - 660W - 600V

Etlin Daniels FLTS-T8-P-2-9ML - TURRET SOCKET - T8 - 2 LAMP - BI PIN PLUNGER - 9" SHAL METAL CAN - 660W - 600V

Etlin Daniels IS4221-1-12SNPLW - MOGUL BASE (E39) - 1500W - 600V - 4KV MOGUL WITH SCREWS FOR MOUNTING - 12" SEW-2 LEADS

Etlin Daniels IS4221-1-SCCAPBX - MOGUL BASE (E39) - 1500W - 600V - 4KV PLRT MOGUL SCW TRM ISP55-1/2 IN BOX LEV - #8680

Etlin Daniels IS4221-1-SCTR - MOGUL BASE (E39) - 1500W - 600V - 4KV MOGUL WITH PAL NUTS FOR MOUNTING - SCREW TERMINALS

Etlin Daniels IS4221-4-12SNPLW - MOGUL BASE (E39) - 1500W - 600V - 4KV MOGUL WITH PAL NUTS FOR MOUNTING - 12" SEW-2 LEADS

Medium Base - Bi-Pin - Standard Fluorescent Lampholder - Low Profile - Slide-On - Straight-In Double Edge - Self-Locking Lamplock - Quick-Connect 18AWG Solid or Str. Tinned - White

Medium Base - Bi-Pin - Standard Fluorescent Lampholder - Low Profile - Slide-On - Straight-In Double Edge - Quick-Connect 18AWG Solid or Str. Tinned - White

2G11 Base - 4-Pin - Twin Tube Fluorescent Lampholder - Vertical - Snap-In - Straight-In Double Edge - Quickwire 18AWG Solid or Str Tinned - White

2G11 Base - 4-pin - Twin Tube Fluorescent Lampholder - Horizontal - Snap-In - Straight-In Double Edge  - Quickwire 18AWG Solid or Str Tinned - White

*This is a discontinued item and suggest replacement is FL446.

2G11 Base - 4-Pin - Twin Tube Fluorescent Lampholder - Horizontal - Screw Mount - Straight-In Double Edge - Quickwire 18AWG Solid or Str Tinned - White

white fluorescent shunted has 2 pins high 660w600v.

Medium Base, Bi-Pin, Standard Fluorescent Lampholder, Butt-On, Screw Mount, Plunger, , 9-Inch 18-AWM TEW Wire Leads - White

30 Amp Non-Fused PowerSwitch Safety Disconnect Switch, 3 Pole, 600 Volt, 2 HP 120V, 5 HP 208/240V, 10 HP 480V and 208/240V 3-Phase, 20 HP 480V 3-Phase, 25HP 600V 3-Phase Rated, NSF Certified, NEMA 3R, NEMA 4X, NEMA 12K and IEC IP67 Watertight Rated

Lovato ADXC016600R2 - SOFT STARTER - ADXC… TYPE - WITH INTEGRATED BY-PASS RELAY. THREE-PHASE 600VAC MOTOR CONTROL - 16A