discontinued

Galaxy Lighting - Outdoor Lantern - Oiled Rubbed Bronze - Frosted Amber Seeded Glass - A Shape - Medium Base - 100 Watt

Output Voltage 38V - 107V, Output Current 140mA - 1400mA, Max Output Power 150Watt, Analog 0 to 10 Vdc Dimming with Tuning Interface, High Range Input Voltage 347 – 480 Vac, Constant Current LED Driver.

This Everline LED Driver can be configured to set its current output to a selected fraction of their maximum rated design level. This function is called tuning (or also high‐end trim) and it can be implemented with the LDTC01A using the Selector rotary switches. Tuning assignments are stored in driver memory and are not lost when power is removed. All factory produced drivers are tuned to maximum output unless otherwise noted on the label.

RAB Design - 42" Round Louvered Bollard - 100 Watt - Metal Halide - 120 Volt - Bronze Finish - Medium Base - All units come complete with lamp

Hard Wired LED Driver, Dimmable with any standard MLV TRIAC (Leading edge) dimmer switch, Nema 3R Enclosure – Outdoor Use, Two knock-outs one on each side, ETL Listed, Certified to CSA Standard

* This item has been discontinued. Please refer to the link below for the replacement suggested by the supplier

https://www.bulbspro.com/m96l24dc-277.html

200 Watt - Stage and Studio - Medium Flood - PAR46 - 120 Volt - Medium Side Prong Base - Major Brand

Galaxy Lighting - Franklin - Wall Sconce - Oiled Rubbed Bronze with White Glass - A19 - Medium Base - 100 Watt

150 Watt - T7 Clear Daylight - Pulse Start - Unprotected Arc Tube - 5000K - Double Ended- ANSI M81/M102

The WPTL-L is a highly efficient LED wall mount luminaire. This fixture is supplied with a wall bracket (for surface mounting only). Other options include: a wiring box (for feed trough mounting), a trunion (for flood mounting) or a slipfitter (for area lighting).

Galaxy Lighting - Wall Sconce - Pewter - Marbled Glass - A19 - Medium Base - 100 Watt

Colored Incandescent Bulb - 100W A19 - Ceramic Green - 130V - 2000 Hrs - Medium E26 Base - 100A19/CG

* This is a discontinued model and is sold while quantity last only. Please check for stock availability

Standard case - electronic low frequency square wave ballast for 150W metal halide lamps with 120V "tap" for 3 or 4-wire self heating thermal protectors (IDTPs). Top Lead Exit, Mounted by Stud. Pulse Start Ignition 120-277V, Line Voltage Must be Reset after Abnormal Operation Shutdown Circuit.

Lithonia Lighting OLWX2 LED 90W 50K 120 PE DDB M2 - Low Profile LED Wall Pack - LED - 90W - 5000K Daylight - 120V - Photocell - Buttontype - Dark Bronze Finish

90 watt - 120 volt - PAR38 - Medium Screw Skirted (E26sk) Base - 2,900K - Clear - IR - Reflector Spot - 6,000 Hrs. - Energy Advantage | Philips Halogen Light Bulb

RAB Design - 150 Watt - Metal Halide Light - 120 Volt - Performance Grade Flood - Yoke Mount - Asymmetrical Distribution - Specular Aluminum Reflector

An essential opal white glass has been softly folded and contoured -
held in place by barely there hardware.

* This is a discontinued model, we keep it here just for reference

DC 12V Single Color LED Dimmer Controller + RF Remote Control, 96 Watt, 8 Amp

* This is a discontinued model, we keep it here just for reference

The RF602ICAT is a 6” aperture line voltage dual label housing with adjustable socket for use in remodeling applications to provide accent and task lighting. RF602ICAT is designed for insulated ceilings and can be in direct contact with ceiling insulation. This AIR-TIGHT housing design prevents airflow through ceiling for saving heating and air conditioning costs.  The RF602ICAT offers a wide choice of trim types including reflector, wall wash and retractable trims.

Traditional blown opal glass with antique finished metal hardware