discontinued

Triad C2642UNVME – Series Programmed Rapid Start - 120-277V - Ballast Factor 1.0 - Power Factor >0.98 - Min. Temp. Rating 0 Deg. F (-18oC) - Mult Exit Means Side Lead Wiring and Bottom Lead Wiring both Available

* This item has been discontinued. Please refer to the link below for the replacement we suggested

https://www.bulbspro.com/icf2s26h1ld35m.html

Triad B228PUNV-C0W1C – Series Programmed Rapid Start - 120-277V - Ballast Factor 1.0 - Power Factor >0.98 - Min. Temp. Rating 0 Deg. F (-18^oC) - For 1 or 2 Lamps Max. to 28W T5 Lamps 

* This item has been discontinued. Please refer to the link below for the replacement we suggested

https://www.bulbspro.com/icn2s28n35m.html

Triad C226UNVSV3ME - SuperDim Series Programmed Rapid Start - 120/277V - Ballast Factor 1.0 - Power Factor >0.98 - Min. Temp. Rating 0 Deg. F (-18^oC)

Ultrasave brand ballast offer exceptional quality and efficiency at prices lower than name-brand competitors. Compare the specs and save!

Everline D10CC55UNVTZ‐C, Output Voltage 19V - 53V, Output Current 11mA - 1050mA, Max Output Power 55Watt, Analog 0 to 10 vDC Voltage Control, Class 2 Output, Universal input voltage 120 – 277 Vac, Wire Trap / Plug‐in Connectors for 18 AWG Solid Wire, Constant Current LED Driver. 

This item is discontinued. The substitue is Advance XI054C150V054BST1M, please let us know if you want to buy Advance XI054C150V054BST1M to replace Everline D10CC55UNVTZ‐C, so that we can program it correctly before we ship it to you. 

Everline D10CC60UNV-VF, Output 19V - 57V, 32mA - 1050mA, Max Output Power 60Watt, Analog 0 to 10 vDC Voltage Control, Class 2 Output, Input Voltage 120 – 277 Vac, 12V Power Source for Active Cooling Device, Constant Current LED Driver, Square Case with Mounting Feet

* This is a discontinued model and is sold while quantity last only. Please check for stock availability

Output Voltage 20V - 57V, Output Current 1050mA, Max Output Power 60Watt, Class 2 Output, Universal input voltage 120 – 277 Vac, 12V Power Source for Active Cooling Device, Constant Current LED Driver, Square Case with Mounting Feet

Output Voltage 20V - 57V, Output Current 1050mA, Max Output Power 60Watt, Class 2 Output, Universal input voltage 120 – 277 Vac, 12V Power Source for Active Cooling Device, Constant Current LED Driver, J-Box Stud Mount

Output Voltage 20V - 57V, Output Current 1050mA, Max Output Power 60Watt, Class 2 Output, Universal input voltage 120 – 277 Vac, 12V Power Source for Active Cooling Device, Constant Current LED Driver, No Mounting Feet

Everline D15CC55UNVA‐C, Output 13V - 37V, 45mA - 1500mA, Maximum 55Watt, Analog 0 to 10 vDC Voltage Control, Class 2 Output, Universal input voltage 120 – 277 Vac, Constant Current LED Driver

* New model D15CC55UNVTW-C

Everline D15CC55UNVTW‐C, Output 13V-37Vdc, Maximum Output 56Vdc, 45mA-1500mA, Maximum 55Watt, Analog 0 to 10 vDC Voltage Control with Tuning Interface, Class 2 Output, Universal input voltage 120 – 277 Vac, Constant Current LED Driver.

This Everline LED Driver can be configured to set its current output to a selected fraction of their maximum rated design level. This function is called tuning (or also high‐end trim) and it can be implemented with the LDTC01A using the Selector rotary switches. Tuning assignments are stored in driver memory and are not lost when power is removed. All factory produced drivers are tuned to maximum output unless otherwise noted on the label.

Output Voltage 25V - 41V, Output Current 310mA per Channel, Output Power 12.5W per Channel, Analog 0 to 10 vDC Voltage Dimming Control, Class 2 Output, Universal input voltage 120 – 277 Vac, Constant Current LED Driver.

* This is a discontinued model, we keep it here just for reference

Everline D12V60UNV‐A, Output 12Vdc, 5.0A, Maximum 60Watt, Class 2 Output Led Driver, Universal Input Voltage 120-277Vac, Constant Voltage LED Driver.

*This model has been discontinued. The substitute is Meanwell LPV-60-12.

50 watt LED Grow Light with a full spectrum, emphasizing the Blue and Red wavelengths. This lamp can be used as a primary or supplemental light source for almost any type of indoor growing. The light output has a very wide angle. It will provide the greatest benefit when mounted relatively close to the plants. Generally, this light can replace up to a 100 watt HPS lamp or up to 200 watt Incandescent lamp. 

17 watt LED Grow Light with a full spectrum, emphasizing the Blue and Red wavelengths. This light is designed as a retrofit for a 4 foot fluorescent tube, and fits into many fixtures. In some cases simple modifications are necessary, which include removing the ballast and in some cases replacing a socket (tombstone). It can be installed in an open or closed fixture, and accepts an input voltage of 120-277VAC.

60W Dimmable LED Retrofit Lamp for replacing HID lamps up to 250W 120 - 277 Volt, E39 base, Approved by UL for enclosed fixtures, External driver with multiple dimming options, IP65 lamp and driver, UL1993 certified and UL1598C classified for USA and Canada.

* This item has been discontinued. Please refer to the link below for the replacement suggested by the supplier

https://www.bulbspro.com/led-8024m345-g7-fw.html

60W Dimmable LED Retrofit Lamp for replacing HID lamps up to 250W 120 - 277 Volt, E39 base, Approved by UL for enclosed fixtures, External driver with multiple dimming options, IP65 lamp and driver, UL1993 certified and UL1598C classified for USA and Canada.

* This item has been discontinued. Please refer to the link below for the replacement suggested by the supplier

https://www.bulbspro.com/led-8024m345-g7-fw.html

RAB Design LFW-LED60-B-4K-TG - LED Linear Vapourproof fixture - 120-277V - 59W - min 7082Lm - 4000K Cool White - Tempered Glass Lenss

RAB Design LFW-LED60-B-4K-TG-DIM - LED Linear Vapourproof fixture - 120-277V - 59W - min 7082Lm - 4000K Cool White - Tempered Glass Lens - 0-10V Dimming