Skip to Main Content »

Search Site
Your shopping cart is empty

All Prices are in Canadian Dollars

Loadshare DIVVEE-40 - 240/208 Single Phase - 40 Amps - Share Two Loads on One Existing Breaker without Affecting the Load Calculation of the Electrical Panel

Be the first to review this product

Loadshare for EV Charger, DIVVEE-40 is a device that intercepts a 40 Amp circuit that is already included in your electrical breaker panel (usually the range breaker) and splits the power supply between that and the EV charger. When the range turns on, DIVVEE automatically shuts off the EV charger until the range stops operating, then turns the charger on again.
 

Availability: In stock

$899.00

Loadshare DIVVEE-40 - 240/208 Single Phase - 40 Amps - Share Two Loads on One Existing Breaker without Affecting the Load Calculation of the Electrical Panel

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Additional Information

Brochures & Specific Sheets


Stock Code DIVVEE-40
Brand Loadshare
Family Loadshare System Devices
Voltage (V) 208/240Vac Single Phase, 50/60Hz
Amp Rating 40A
Width (in) 12
Height (in) 12
Depth (in.) 4
Color Black
Housing NEMA 1 for Indoor Use
Phase Single Phase
UL Listed CQAIUS listed for accordance with Canadian and US electrical codes.
Warranty Made in Canada, 1 Year Warranty
Notes Loadshare DIVVEE-40 not only good for EV chargers, but also good for Hot Tubs, Air Conditioners and etc.
Notes Question: Why do I need DIVVEE?
Answer: You have an EV and want to charge from home. DIVVEE will utilize the available power in your existing breaker panel without the need to upgrade it.

Question: When do we need a DIVVEE?
Answer: DIVVEE is the perfect fit if you need to upgrade your electrical power to operate an EV charger and want a cost-effective solution.

Question: What if I do not upgrade my breaker panel when installing a Level 2 EV Charger?
Answer: If your panel is already close to capacity, you can cause the main breaker in your panel to trip each time the EV charger turns on, which will shut the power off your whole house.

Question: How does a DIVVEE work?
Answer: DIVVEE uses your stove power to supply power to the Level 2 EV charger. It senses the power consumption of the stove and turns the EV charger on if the stove is off, and off when the stove is on.

Question: Can I use the DIVVEE for anything else?
Answer: Yes! The DIVVEE, though mostly used for EV’s, is a load sharing device that can be used for hot tubs, heating & AC units, home welding & wood working shops 40 amps or less.

Question: Where in the house can I install the DIVVEE?
Answer: The DIVVEE can be installed in any home, anywhere in your home.

Question: Does a DIVVEE work with any EV charger?
Answer: The DIVVEE will support all level 2 EV chargers.

Question: Can I get it in a different color?
Answer: Yes. We will manufacture the DIVVEE in a different color based on a paint code you provide at an additional cost.

Question: What' the major difference between Level 1, Level 2, Level 3 EV chargers?
Answer: Please see below EV Charging Level summary. (reference only)
Level Output Voltage Use Charge Connector Charge Time From Empty
1 AC Home J1772 24+ Hours
2 AC Home & Commercial J1772 8+ Hours
3 DC Commercial CHAdeMO or CCS 30 to 60 minutes

The DIVVEE–40 is a load sharing device designed to share two loads on one existing breaker without affecting the load calculation of the electrical panel.


Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.