Additional Information
| Stock Code | DMW2 L24 3000LM AFL MD MVOLT GZ1 40K 80CRI |
|---|---|
| Brand | Lithonia Lighting |
| Fixture Type | Indoor Fixture |
| Voltage (V) | 120-277V |
| Wattage (w) | 27 W |
| Bulb Type | LED |
| Lumens (Initial) | 3000 lumens |
| CRI | 80 |
| Color Temperature (K) | 4000K Cool White |
| Length (in) | 24'' |
| Width (in) | 3.74'' |
| Height (in) | 5.88'' |
| Dimmable | Yes |
| Lens: | Acrylic, Polycarbonate |
| UPC | 889804321562 |
| Start Temp. (Min) | -20°C |
| Start Temp. (Max) | 40°C |
| Type | Linear |
| UL Listed | UL , CSA , IP65 , IP66 Listed |
| Warranty | 5-year limited warranty |
| Is DLC Approved | Yes |
DMW2
LED Enclosed and Gasketed
FEATURES & SPECIFICATIONS
INTENDED USE — For areas that require good vertical illumination and excellent glare control at low mounting heights. Ideal for open areas, retail spaces and aisles. Certain airborne contaminants can diminish the integrity of acrylic and/or polycarbonate.
CONSTRUCTION — One-piece 5VA rated fiberglass housing with integral perimeter channel utilizes continuous poured-in-place NEMA 4X gasket. Simple two-piece design consists of housing and optical assembly to streamline installation process. Polymeric latches positively attach to housing and keep from becoming a hindrance during install.
OPTICS — Injection-molded, acrylic lens (.080" thick), provides high impact-resistance comparable to 100% DR. F1 rated for outdoor use, lenses resist breaking, yellowing or becoming brittle over time. UV stabilized polycarbonate diffuser available (.080" thick) in clear or frosted for additional impact strength. Polycarbonate lens is recommend for lower mounting heights where vandal protection is desired.
ELECTRICAL — Tool-less one piece optical assembly combines LEDs and lens into one component. Optical assembly easily connects to housing with plug and play harness, eliminating time consuming wiring connections. LED drivers consumes 40 input watts maximum and offers 1% dimming standard. Integral surge protection tested in accordance with IEEE/ANSI C62.41.2 to industrial standards 6kV/3kA.
L85 at 60,000 hours.
INSTALLATION — Two-piece design makes installations faster than ever by simplifying wiring connections. Power connection is easily accommodated through pre-drilled holes at each end, optional wet location fittings available for maximum flexibility.
Stainless steel (#316) surface spring-mounting brackets with bail wires standard (2 included) allow for ceiling, wall or suspended mount.
Swivel stem(provided by others) when pendant mounting. Factory installed junction box option accommodates up to 4X4 sized boxes and includes integrated gasket to maintain wet location listings.
Quick Mount Bracket (QMB) ships installed on fixture and is recommended for fastest surface mount installs, ideal for end to end installations or larger jobs.
LISTINGS — CSA Certified to UL and C-UL standards for ambient temperatures ranging from -40°F (-40°C) to 104°F (40°C) (see Operational Data chart for actual temperature rating per lumen package). F1 rating makes luminaire suitable for wet locations without covered ceilings. NEMA 4X rated. IP ratings: IP65 and IP66 rated. 1500 PSI hose-down.
NSF listed for Splash Zone II.
DesignLights Consortium® (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions are qualified.
WARRANTY — 5-year limited warranty.
Ambient temperatures that exceed 104°F (40°C) will result in reduced life and will void warranty.
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
$32.78
|
Call for price
|
Call for price
|
$61.94
|
$155.89
|
$26.08
|
$47.97
|
$31.36
|
