Additional Information
Brochures & Specific Sheets
| Stock Code | DSXF2 LED P1 40K YK M2 |
|---|---|
| Brand | Lithonia Lighting |
| Fixture Type | Outdoor |
| Voltage (V) | 120-277V |
| Wattage (w) | 54W |
| Bulb Type | LED |
| Lumens (Initial) | 7793 Lumens |
| CRI | 70 CRI |
| Color Temperature (K) | 4000K Cool White |
| Width (in) | 12-7/8” |
| Height (in) | 12” |
| Finish | Dark Bronze |
| UPC | 191723902198 |
| Type | Floodlight |
| Life Hours | 100,000 hours |
| UL Listed | CSA |
| Warranty | 5-year limited warranty |
| Is DLC Approved | Yes |
D-Series Size 2
LED Flood Luminaire
Introduction
D-Series Size 2 Flood features advanced optics and precision illumination in a sleek and compact form that seamlessly blends with the environment. State of the art reflector design with cutting edge chip-on-board LED technology produces excellent uniformity using precision beam patterns.
Provides long-life replacement for 150-250W metal halide floodlights offering up to 74% energy savings with expected service life of over 100,000 hours.
FEATURES & SPECIFICATIONS
INTENDED USE
The sleek design of the D-Series Size 2 Flood reflects the embedded high performance LED technology. It is ideal for larger signage, facade and flagpole lighting in many commercial and residential applications.
CONSTRUCTION
Die-cast aluminum housing has integral heat sink fins to optimize thermal management through conductive and convective cooling. The LED driver is mounted in direct contact with the casting to promote low operating temperature and long life. Housing is completely sealed against moisture and environmental contaminants using a tempered glass lens (IP66). Low EPA (0.8 ft2) for optimized wind loading.
FINISH
Exterior parts are protected by a zinc-infused Super Durable TGIC thermoset powder coat finish that provides superior resistance to corrosion and weathering. A tightly controlled multi-stage process ensures a minimum 3 mils thickness for a finish that can withstand extreme climate changes without cracking or peeling.
OPTICS
A variety of precision-molded vacuum-metallized specular reflectors are engineered for superior target illumination, uniformity and spacing. Light engines are available in 3000K (70 CRI min.), 4000K (70 CRI min.) or 5000K (70 CRI min.) configurations. Optional visors offer additional versatility.
ELECTRICAL
Light engine(s) consist of chip-on-board (COB) LEDs directly coupled to the housing to maximize heat dissipation and promote long life (100,000 hrs, L80). Class 1 electronic driver has a power factor >90%, THD <20%, and has an expected life of 100,000 hours with <1% failure rate. Standard 6KV surge protection meets a minimum Category C Low operation (per ANSI/IEEE C62.41.2).
INSTALLATION
Integral adjustable knuckle with 1/2-14NPS threaded pipe, tenon slipfitter, or integral slipfitter, facilitates quick and easy installation to a variety of mounting accessories. This secure connection enables the D-Series Size 1 to withstand up to a 1.5 G vibration load rating per ANSI C136.31.
LISTINGS
CSA certified to U.S. and Canadian standards. Luminaire is IP66 rated. Rated for -40°C minimum ambient.
DesignLights Consortium® (DLC) Premium qualified product and DLC qualified product. Not all versions of this product may be DLC Premium qualified or DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions are qualified.
DesignLights Consortium® (DLC) Premium qualified product and DLC qualified product. Not all versions of this product may be DLC Premium qualified or DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions are qualified.
WARRANTY
5-year limited warranty. Complete warranty terms located at: www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx.
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
$419.93
|
$1,052.19
|
$16.80
|
$610.23
|
$288.00
|
$138.42
|
$187.49
|
$1,208.00
|
