Additional Information
Brochures & Specific Sheets
| Stock Code | DSXF3 LED 6 P1 40K IS |
|---|---|
| Brand | Lithonia Lighting |
| Fixture Type | Outdoor |
| Voltage (V) | 120-277V |
| Wattage (w) | 111W |
| Bulb Type | LED |
| Lumens (Initial) | 17450 Lumens |
| CRI | 70 CRI |
| Color Temperature (K) | 4000K Cool White |
| Width (in) | 12.90" |
| Height (in) | Overall Height: 20.80" |
| Finish | Dark Bronze |
| Weight (lb.) | 21 lbs. |
| UPC | 00889804560213 |
| Type | Floodlight |
| Life Hours | 100,000 hours |
| UL Listed | cSAus |
| Warranty | 5-year limited warranty |
D-Series Size 3
LED Flood Luminaire
FEATURES & SPECIFICATIONS
INTENDED USE
The sleek design of the D-Series Size 3 Flood reflects the embedded high performance LED technology. It is ideal for wallwash, security and general area lighting in many commercial and institutional applications.
CONSTRUCTION
Die-cast aluminum housing has integral heat sink fins to optimize thermal management through conductive and convective cooling. The LED driver is mounted in direct contact with the casting to promote low operating temperature and long life. Housing is completely sealed against moisture and environmental contaminants (IP66). Low EPA (1.4 ft2) for optimized wind loading.
FINISH
Exterior parts are protected by a zinc-infused Super Durable TGIC thermoset powder coat finish that provides superior resistance to corrosion and weathering. A tightly controlled multi-stage process ensures a minimum 3 mils thickness for a finish that can withstand extreme climate changes without cracking or peeling.
OPTICS
A variety of precision-molded vacuum-metallized specular reflectors are engineered for superior field-to-beam ratios, uniformity and spacing. Light engines are available in 3000 K (70 CRI min.), 4000 K (70 CRI min.) or 5000 K (70 CRI min.) configurations. Optional visors offer additional versatility.
ELECTRICAL
Light engines consist of chip-on-board (COB) LEDs directly coupled to the housing to maximize heat dissipation and promote long life (100,000 hrs, L80). Class 1 electronic driver has a power factor >90%, THD <20%, and has an expected life of 100,000 hours with <1% failure rate. Surge protection meets a minimum Category C Low operation (per ANSI/IEEE C62.41.2).
INSTALLATION
Integral adjustable knuckle with 3/4-14 NPT threaded pipe, or yoke mounting, facilitates quick and easy installation to a variety of mounting accessories. This secure connection enables the D-Series Size 3 to withstand up to a 1.5 G vibration load rating per ANSI C136.31.
LISTINGS
CSA certified to U.S. and Canadian standards. Luminaire is IP66 rated. Rated for -40°C minimum ambient.
DesignLights Consortium® (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org to confirm which versions are qualified.
DesignLights Consortium® (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org to confirm which versions are qualified.
WARRANTY
5-year limited warranty. Complete warranty terms located at: www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx.
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
$720.08
|
$295.52
|
$457.13
|
$547.66
|
$292.43
|
$1,005.20
|
$923.93
|
$671.66
|
