Dyson Airblade Tap (Wall) - Hand Dryer AB11 120V 60Hz - Stainless Steel - Brushed

Dyson Airblade Tap

AB09

AB10

AB11

Electrical

• Input voltage/Frequency: 120-127V 50 & 60 Hz
• Rated power: 1400 W
• Motor type: Dyson digital motor V4 – brushless DC Motor
• Motor switching rate: 6,100 per second
• Motor speed: 92,000 rpm
• Operating temperature range: 0°– 40°C
• Heater type: None
• Standby power consumption: 0.5 W or below

Construction

• Tap construction: Stainless steel (brushed)
• Under counter motor assembly construction: Moulded ABS (main unit),also uses PC & PP
• Exterior screw type: Anti-tamper M6 machine screw
• Water ingress protection to IP35

Filter

• HEPA filter (glass fibre and fleece prelayer)
• Bacteria removal from air: 99.97%

Operation

• Touch-free infra-red activation
• Hand dry time measurement: 14 seconds.
• (Measurement based on National Sanitation Foundation Protocol P.335)
• Operation lock-out period: 30 seconds
• Airspeed at apertures: 675 km/h
• Operating airflow: Up to 35 L/s

Water Operation

• Water flow rate: 4L/min & 1.9L/min
• Tap Aerator: Aerated water outlet
• Tap power supply: Mains supply
• Water temperature control: Thermostatic mixer recommended (not supplied)
• Water pressure required: 1-8 Bar

Logistics

• Serial number prefix: AB09 ED9; AB10 EE1; AB11 EE2
• Single unit order code: AB09 25995-01; AB10 25996-01; AB11 25997-01
• Net weight: AB09 9.48lbs (4.3kg); AB10 10.14lbs (4.6kg); AB11 19.7lbs (8.95kg)
• Packaged weight: AB09 13.45lbs (6.1kg); AB10 14.33lbs (6.5kg); AB11 25.1lbs (11.39kg)
• Packaged dimensions (in / mm): 

  AB09 H12” (303mm) × W11¼” (284mm) × D11¼” (286mm)
  AB10 H10¾” (276mm) × W17¼” (437mm) × D11” (280mm)
  AB11 H12” (302mm) × W24” (610mm) × D14¾” (375mm)

• Unit barcode: AB09: 8799 5700 914 1; AB10: 8799 5700 915 8; AB11: 8799 5700 916 5

Sink Specifications:

• The Dyson Airblade™ Tap is compatible with most sink types. Ensure plugs are not installed in the sinks.
• Recommended sink dimensions: All sink measurements are internal unless stated otherwise.
• Width of sink - Minimum: 13¾” / 350mm
• Front to back - Minimum: 11¾” / 300mm
• Depth of sink – Minimum: 4” / 100mm
• Depth of sink - Maximum for AB10 only: 7¾” / 200mm (External measurement)
• Sink materials: Sinks with highly polished surfaces should be avoided e.g.shiny chrome. Porcelain and brushed metal are ok to use.

Standard warranty

• 5 year parts, 1 year labour warranty

Product Certification

• ETL - Complies with: CAN/CSA-E60335-2-23
• ADA Compliant