Additional Information
Brochures & Specific Sheets
| Stock Code | EEL_UTLED-S9W-3KWH |
|---|---|
| Brand | EEL Canada |
| Family | EEL ULTRATHIN 4" LED RECESSED |
| Part No | UTLED-S9W-3KWH |
| Voltage (V) | 120VAC 60Hz |
| Height (in) | 1/2″ (12 mm) |
| Diameter (in) | 5″ (125 mm) |
| Bulb Type | LED |
| Lumens (Initial) | 550 Lumens |
| Color | White |
| CRI | >80 |
| Color Temperature (K) | 3000K Warm White |
| Dimmable | Yes |
| Case Quantity | 1 |
| Wattage (w) | 9 Watts |
| Life Hours | 50,000 Hours Life |
| Incandescent Equal (W) | 50 Watt Halogen Bulb |
| Start Temp. (Max) | 104°F (+40°C) |
| Start Temp. (Min) | -40°F (-40°C) |
| Beam Angle | 120 Degree |
| Warranty | 5 Years Warranty |
| UL Listed | cETLus |
| Cross Refefence | For additional options and special quantity discounts, please contact our sales department 1-(855)-296-9508 x 101 or send email to cs@bulbspro.com |
DESCRIPTION
The eel UltraThin 4" Recessed Luminaire fits where no other recessed fixture can. This recessed luminaire is dimmable, IC air tight rated, wet location approved and energy star rated.
SPECIFICATION FEATURES
- Construction: Round 4” fixture with integral LEDs
- Controls: Isolated driver factory installed inside connection box
- Electrical: Ambient temperature -40oC to 40oC. CRI: 80. 120 Volt. ; 9 Watt equivalent to 50 Watt halogen; 12 Watt equivalent to 65 Watt halogen
- Mounting: Cut hole in ceiling and snap fixture in opening with attached spring clips. Clearance needed - 2" (50mm)
- Dimension: OD 4-3/4" (120mm) x ID 4-1/8" (105mm)
- Cut Out: Cut out 4-1/8" (±1/8") (105 ± 3mm)
- Thickness: 1/2" for 9W Series, 1" for 12W Series
- Beam Angle: 120o
- Finish: White trim or brushed nickel
- Compliance: CETL and Energy Star
- Warranty: 5 years, 50,000+ hours
$8.45
|
$8.06
|
$12.87
|
$88.78
|
Lithonia Lighting WF4 LED 30K40K50K 90CRI MW M6 - 4" Wafer-thin LED Downlight - 90 CRI - Matte White
$23.84
|
$35.69
|
$30.93
|
$65.32
|
