Electrical

Designed for industrial, commercial and residential applications. Highest hp ratings in the industry for loads up to 40 amps, providing direct 24 hour control of most loads. Provides 1 to 12 "on/off" operations each day with minimum on/off times of 1 hour. All models equipped with one "on" and one "off" tripper.

Controls loads up to 40 Amps per pole - For outdoor installations - 1 to 10 ON/OFF operations per day - Minimum ON/OFF times of 1 hour - 208-277 VAC - DPST switch

The Intermatic T101B is a 24hour, 125 V mechanical time switch in steel indoor enclosure. It is designed for residential, commercial, and industrial applications. The heavyduty time switch can control 40Amp electrical loads due to its high horsepower rating. The direct 24hour time switch control is provided along for most loads. There are ON and OFF trippers on the model. The Intermatic T101B includes 1channel On/Off SPST switch with ratings of 120 Volts, 40 Amps, and 4000 W capacity. In addition, there are different accessories available to complete the time switch control

Intermatic T7801BC 125-Volt 7-Day Mechanical Time Switch with Nema 1 Indoor Cover and Carryover

Intermatic T7402BC 4PST 208/277-Volt 7-Day Mechanical Time Switch with Nema 1 Indoor Cover and Carryover

Intermatic T7802B 208/277-Volt 7-Day Mechanical Time Switch with Nema 1 Indoor Cover

Intermatic T7801B 125-Volt 7-Day Mechanical Time Switch with Nema 1 Indoor Cover

120 VAC; 40 Amps per pole, 3PST switch for control of 3-phase lighting, Three Skipper screws included, Independent clock motor terminals, This product should only be installed in Zone 42

Highest motor load ratings in the industry Provides direct 24 hour control of most loads 1 to 12 ON/OFF operations each day Minimum ON/OFF times of 1 hour All models equipped with one ON and one OFF tripper

120 VAC; 40 Amps per pole, 3PST switch for control of 3-phase lighting, Three Skipper screws included, Independent clock motor terminals, This product should only be installed in Zone 30

Time switch in plastic enclosure with heater protection, DPST Switch, 208-277 Clock Supply-Volt - Designed for commercial, industrial and residential applications - Have the highest motor load ratings in the industry - Equipped with ON and OFF trippers - Heater Protection Circuit: 10-Amps, 240-Volt max

120 VAC; 40 Amps per pole - 3PST switch for control of 3-phase lighting - Three Skipper screws included - Independent clock motor terminals - This product should only be installed in Zone 30

208-277 VAC; 40 Amps per pole - 3PST switch for control of 3-phase lighting - Three Skipper screws included - Independent clock motor terminals - This product should only be installed in Zone 30

120 VAC; 40 Amps per pole - 3PST switch for control of 3-phase lighting - Three Skipper screws included - Independent clock motor terminals - This product should only be installed in Zone 34

Time switch in metal enclosure with heater protection, DPST Switch, 208-277 Clock Supply-Volt - Designed for commercial, industrial and residential applications - Have the highest motor load ratings in the industry - Equipped with ON and OFF trippers - Heater Protection Circuit: 10-Amps, 240-Volt max

120 VAC; 40 Amps per pole, 3PST switch for control of 3-phase lighting, Three Skipper screws included, Independent clock motor terminals, This product should only be installed in Zone 34

Provides coordinated control for heater and filter pump operations - Designed to turn OFF a gas fired swimming pool heater approximately 20 minutes before the filter pump shuts down - Eliminates the problem of pounding and knocking due to overheated water, reduces scale and lime deposits and extends the service life of the heater - The 24-hour dial allows up to 12 ON/OFF operations each day - One set of ON and OFF trippers is supplied with each switch

208-277 VAC; 40 Amps per pole - 3PST switch for control of 3-phase lighting - Three Skipper screws included - Independent clock motor terminals - This product should only be installed in Zone 34

120 VAC; 40 Amps per pole - 3PST switch for control of 3-phase lighting - Three Skipper screws included - Independent clock motor terminals - This product should only be installed in Zone 42