Electrical

The Leviton VerifEye™ Series 1000 line of revenue-grade submeters meets all measurement and verification-based opportunities including load management and LEED rating achievement. Designed to provide a simple and effective process for accurately capturing measurements of power consumption, Series 1000 Meters are easy to specify and install for new construction and retrofits.

Submetering Current Transformer, 400A, 400:0.1A, Split Core 1.5 x 1.5", Qty 1, Electric Meter: Yes, Title 24 Compliant, ASHRAE 90.1 Compliant

Split core CTs can be disassembled or ‘split’ into halves eliminating the need to turn power off and open the circuit during installation. This time-saving installation is ideal for critical loads that cannot be disconnected. Split core CTs close securely for fast, precise installation with no need for time-consuming tie wraps and no worries about improper seating or core half separation.

Current Transformer, Split Core, 400A, 333mV, 1.25" x 1.25" Opening, 144" Leads, 0.5% accuracy, Black, For Submetering

Current Transformer, Split Core, 333MV, 400A, 0.5% 1.25 X 1.25 in, 12 FT Leads

Leviton 333mV Current Transformers (CTs) support the Series 4000 and Series 7000 meter lines of revenue-grade meters and help meet all measurement and verification-based opportunities, including smart metering and LEED rating achievement.

Siemens Sentron Bus Plug 3-PH 3W (200 - 400A) type circuit breaker enclosure. Breaker rating 600V (400A). Meets IP40 Rating. Special features: internal ground, JXD6 breaker frame.

Siemens Sentron Bus Plug 3-PH 3W (200 - 400A) type circuit breaker enclosure. Breaker rating 600V (400A). Meets IP40 Rating. Special features: isolated ground, JXD6 breaker frame.

Siemens Low Voltage Busway Sentron Busway Plugs - Sentron BW Crc Brk Plgs 3PH3W 400 Amp are Power Distribution Busway. 400A 3P BUS PLUG WITH JXD6 BREAKER IP40

Siemens SJG1D - For Type JG Breakers - 600V - 400A - 3P

Main or subfeed breaker mounting kit for original P1 interiors. Suitable for circuit breaker type (JXD2 - JD6 - JXD6 - HJD6 - HJXD6) in 3-Phase systems. Rated (400A max). Includes all mounting hardware. Does not include breaker. Not suitable for use with Revised P1 panels produced after December 2014.

Circuit breaker mounting kit for S1/S2 and all SE panels. Suitable for Circuit breaker type (JD6, JXD6, HJD6, HJXD6) in 3-Phase systems. Rated (400A max). Does not include breaker.

Siemens SJG2D - For Type JG Breakers - 600V - 400A - 3P

Aluminum (Main or Feed-Thru) Lug kit for revised P1 interior panelboard. Suitable for 3-Phase system rated (400A). Wire range: two 1/0 - 250 kcmil or one No.2 AWG - 600 kcmil (CU/AL). Not suitable for use with Revised P1 panels produced after December 2014.

Siemens 6JJ62 - JXD2/6,JD2/6,HJD6,SJD6,SHJD6 BRKR MTGKIT

Main or subfeed breaker mounting kit for original P1 interiors. Suitable for circuit breaker type (JXD2 - JD6 - JXD6 - HJD6 - HJXD6) in 1-Phase systems. Rated (400A max). Includes all mounting hardware. Does not include breaker. Not suitable for use with Revised P1 panels produced after December 2014.

Aluminum (Main or Feed-Thru) Lug kit for revised P1 interior panelboard. Suitable for 1-Phase system rated (400A). Wire range: two 1/0 - 250 kcmil or one No.2 AWG - 600 kcmil (CU/AL). Not suitable for use with Revised P1 panels produced after December 2014.

Siemens 6JJ62C - JXD2/6,JD2/6,HJD6,SJD6,SHJD6 B RKR MTG K

Siemens 6CLJ1C - CJD6,SCJD6 BRANCH BREAKER MTG KIT CU

Circuit breaker mounting kit for S1/S2 and all SE panels. Suitable for Circuit breaker type (JD6, JXD6, HJD6, HJXD6) in 1-Phase systems. Rated (400A max). Does not include breaker.

Copper (Main or Feed-Thru) Lug kit for revised P1 interior panelboard. Suitable for 3-Phase system rated (400A). Wire range: two 1/0 - 4/0 or one 1/0 - 600 kcmil (CU only). Not suitable for use with Revised P1 panels produced after December 2014.

200 Percent Neutral lug kit for revised P1 interior panelboard. 54 circuits rated (400A), use for 66 circuit also. Kit includes 2 branch circuit neutral strips, 2 Main Neutral Lugs and Hardware. Not suitable for use with Original P1 panels produced before January 2015.