Electrical

Mechanism only 240 VAC, 3HP - Used to protect pool and spa equipment and plumbing against freeze damage - They turn the pump and heater ON when the outdoor temperature drops below the temperature set by the user-adjustable thermostat - 34/1000-Inch drawn steel, electrostatically coated, beige color enclosure

Timer with thermostat for 240 VAC installation, 3HP - Used to protect pool and spa equipment and plumbing against freeze damage - They turn the pump and heater ON when the outdoor temperature drops below the temperature set by the user-adjustable thermostat - 34/1000-Inch drawn steel, electrostatically coated, beige color enclosure

Mechanism only 120/240 VAC, 1.5/3 HP;Used to protect pool and spa equipment and plumbing against freeze damage;They turn the pump and heater ON when the outdoor temperature drops below the temperature set by the user-adjustable thermostat;34/1000-Inch drawn steel, electrostatically coated, beige color enclosure

Thermostat only 120/240 VAC installation, 1.5/3 HP - Used to protect pool and spa equipment and plumbing against freeze damage - They turn the pump and heater ON when the outdoor temperature drops below the temperature set by the user-adjustable thermostat - 34/1000-Inch drawn steel, electrostatically coated, beige color enclosure

Mechanism only 120/240 VAC, 1.5/3 HP;Used to protect pool and spa equipment and plumbing against freeze damage;They turn the pump and heater ON when the outdoor temperature drops below the temperature set by the user-adjustable thermostat;34/1000-Inch drawn steel, electrostatically coated, beige color enclosure

The Intermatic PF1222TB1 is a control system with freeze protection and load center. This control contains two switches and is specifically created for protection of pool and spa equipment against freezing. When the temperature drops below the thermostat set one, which is useradjustable, the control turns On the pump with the heater. There is also a spot to set an extra timer inside or a receptacle for GFCI on the side of enclosure. The Intermatic PF1222TB1 is similar to PF1222T, but additionally contains a 4/8 breaker panel. With this model, your equipment is both automated and protected due to the time control and freeze protection.

Inexpensive insurance to protect Pool and Spa equipment against power surges;Visible green LED indicator shows protection is ON;Type 4x watertight and UV resistant enclosure;Installs in about 10 minutes

Designed to supply 12 volts to pool/spa lights, submersible fixtures and outdoor garden lights - Grounded shield between the primary and secondary windings - Built-in circuit protection

Designed to supply 12 volts to pool/spa lights, submersible fixtures and outdoor garden lights - Grounded shield between the primary and secondary windings - Built-in circuit protection

Up to 44 ON/OFF settings per day Water metering increments from 12 minutes to 20 hours and 45 minutes 14-Day Skipper enables irrigation to be omitted on selected day(s) Provides for every other day operation ON/OFF/AUTOMATIC switch enables shutdown during rainy days and extended watering during dry periods without disturbing the cycle set on dial

Tubing is run from the air button to the air control. When the air button is pushed a blast of air travels through the tubing and engages the air control.

The Intermatic RC127B is an air switch button and 75 ft. tubing for Gunite spas. This model is designed to allow control of pool pump, heater, air blower, or lights from the side of the pool with an air button without risk of electric shock. You can increase safety by controlling spa applications with the Intermatic RC127B. This model is also approved by CSA/CUS.

The sensor is designed to protect the pool and spa equipment and plumbing against freeze damage. The sensor plugs into the circuit board on the back of the P1353ME and turns ON the filter pump when air temperature drops below the programmed temperature. The freeze programming mode will not appear unless the sensor is plugged into the clock.

Intermatic 178T24 THERMOSTAT FOR FP1102T/PF1103T

Remote Command 1-Air - Designed to control pool/spa combinations economically and reliably away from the equipment - With one touch, these units automatically override the 24 Hour timer - automatic switch the valves from pool-filter mode to the spa/water feature mode - Comes complete with two PE24VA 24-Volt valve actuators

The Intermatic 21T156A is a pack of 4 standoff posts. These posts are designed for mounting wiring devices. With the help of Intermatic 21T156A, the toggle switches are mounted inside Intermatic control panels or pool/spa control centers.

The Intermatic RC2163BFE is an air switch control system. This model is specifically designed to control spa/pool combinations reliably and economically away from the equipment. The system comes with two PE24VA 24Volt valve actuators. With one touch, the Intermatic RC2163BFE automatically turn ON the filter pump and override the 24Hour timer and switch the valves from poolfilter mode to the water/spa feature mode.

Can be used with Intermatic RC939 - Operate as ordinary ON/OFF switches but they also respond to the signals of a hand held transmitter - Designed for indoor or outdoor use, and can handle a variety of switching applications - Enclosure: Beige outdoor grade plastic

This switch provides coordinated control for any pool/spa heater and any filter pump. It is designed to turn OFF a gas fired pool/spa heater approximately 20 minutes before the filter pump shuts down. This eliminates the problem of pounding and knocking due to overheated water, reduces scale and lime deposits and extends the service life of the heater.