Electrical

Synchronous drive (no battery back up) - 21 Amp SPDT switch - Captive trippers with 15-minute intervals - 1/4-Inch quick-connect terminals - No override

Synchronous drive (no battery back up) - 21 Amp SPDT switch - Captive trippers with 15-minute intervals - 1/4-Inch quick-connect terminals - No override

Synchronous drive (no battery back up) - 21 Amp SPDT switch - Captive trippers with 15-minute intervals - 1/4-Inch quick-connect terminals - 3-way override

Quartz drive with battery backup - 21 Amp SPDT switch - Captive trippers with 15-minute intervals - 1/4-Inch quick-connect terminals - No override

Quartz drive with battery backup - 21 Amp SPDT switch - Captive trippers with 15-minute intervals - 1/4-Inch quick-connect terminals - No override

Synchronous drive (no battery back up) - 21 Amp SPDT switch - Captive trippers with 2-hour intervals - 1/4-Inch quick-connect terminals - 3-way override

Synchronous drive (no battery back up) - 21 Amp SPDT switch - Captive trippers with 2-hour intervals - 1/4-Inch quick-connect terminals - 3-way override

Synchronous drive (no battery back up) - 21 Amp SPDT switch - Captive trippers with 2-hour intervals - 1/4-Inch quick-connect terminals - 3-way override

Synchronous drive (no battery back up) - 21 Amp SPDT switch - Captive trippers with 2-hour intervals - 1/4-Inch quick-connect terminals - No override

Synchronous drive (no battery back up) - 21 Amp SPDT switch - Captive trippers with 2-hour intervals - 1/4-Inch quick-connect terminals - No override

Synchronous drive (no battery back up) - 21 Amp SPDT switch - Captive trippers with 2-hour intervals - 1/4-Inch quick-connect terminals - No override

Synchronous drive (no battery back up) - 21 Amp SPDT switch - Captive trippers with 15-minute intervals - 1/4-Inch quick-connect terminals - 3-way override

Synchronous drive (no battery back up) - 21 Amp SPDT switch - Captive trippers with 15-minute intervals - 1/4-Inch quick-connect terminals - 3-way override

Synchronous drive (no battery back up) - 21 Amp SPDT switch, 50 HZ - Captive trippers with 15-minute intervals - 1/4-Inch quick-connect terminals - 3-way override

24-Hour Electromechanical Timer Module w/Battery Backup, 21Amps, SPDT, 120 Volt, Minimum ON/OFF Time 15 minutes, Surface Mounting, NO Override Function.

The Intermatic RC127B is an air switch button and 75 ft. tubing for Gunite spas. This model is designed to allow control of pool pump, heater, air blower, or lights from the side of the pool with an air button without risk of electric shock. You can increase safety by controlling spa applications with the Intermatic RC127B. This model is also approved by CSA/CUS.

Can be used with Intermatic PE953, P1353ME, P4243ME, P4043ME - Used to control gas or electric heater thermostat - Parts can be added or replaced without interfering with the original system - Modules are capable of working within a system or independently - Receiver, antenna and instructions included

Includes one P1353ME mechanism - Countdown and override features allow programs to be interrupted for service and automatically resumed without reprogramming your system - 48/1000-Inch steel with electrostatically applied light beige finish enclosure - 26-Inch (66.3 cm) Height by 18-Inch (45.9 cm) Width by 5-1/2-Inch (14.0 cm) Diameter - 125-Amps, 120, 240 VAC or 120, 208 VAC single phase

The Intermatic PE40000 is a 125 Amp control system with type 3R load center. This model contains all necessary controls for the efficient, safe, and automatic operation of your pool and spa equipment in one panel. With this model it is easy to turn your digital control of PE series into a wireless control system.