Electrical

480 VAC 3-Phase Delta, Surge Panel with Replaceable Surge Modules: 7480 (3), NEMA 12 Enclosure, UL 1449 3rd Edition Compliant

120/240 Volt 200A, Meter Socket Surge Arrester Adapter- Type 1, NEMA 3R Enclosure, Outdoor Rated, UL 1449 3rd Ed

Type 1 Surge Arrester, 3 Phase 120/208V WYE, or 3 Phase Delta 240V, UL 1449 3rd Ed. Polycarbonate Enclosure with UV Inhibitors

Type 1 Surge Arrester, Single Phase 120/240V, UL 1449 3rd Ed. Polycarbonate Enclosure with UV Inhibitors

9.6 Volt DC, Pole, Wire, Communication Module Surge Protective Device, 4-20ma Signal Loop 9VDC Networks, Surface Mounted, 3-Pin Header Wired, in a NEMA 1 Enclosure

9.6 Volt DC, Pole, Wire, Communication Module Surge Protective Device, Blue Hose Network, Surface Mounted, 3-Pin Header Wired, in a NEMA 1 Enclosure

9.6 Volt DC, Pole, Wire, Communication Module Surge Protective Device, Modbus and Modbus Plus Networks, Surface Mounted, 3-Pin Header Wired, in a NEMA 1 Enclosure

24 Volt DC, 2 Pole, 2 Wire, Equipment Cabinet SPD Surge Protective Device, Wired-In Module, DIN-Rail Mounted, Terminal Block Wired, in a NEMA 1 Enclosure

24 Volt DC, 2 Pole, 2 Wire, Equipment Cabinet SPD Surge Protective Device, Wired-In Module, Surface Mounted, Terminal Block Wired, in a NEMA 1 Enclosure

19.8 Volt DC, Pole, Wire, Communication Module Surge Protective Device, Ethernet PLC Port & Cat3 Networks, Surface & DIN-Rail Mounted, RJ-45 Wired, in a NEMA 1 Enclosure

38.5 Volt DC, Pole, Wire, Communication Module Surge Protective Device, 4-20ma Signal Loop 35VDC Networks, Surface Mounted, 3-Pin Header Wired, in a NEMA 1 Enclosure

The Intermatic IG206153 Type 3 Point-of-Use Surge Protective device is designed for heavy industrial use with 3-mode surge protection (L-N, L-G, N-G). It features a 15 Amp resettable breaker and 14 gauge SJT power cord with molded plug.

The Intermatic IG20B123 Type 3 Point-of-Use Surge Protective device is designed for heavy industrial use with 3-mode surge protection (L-N, L-G, N-G). It features a 15 Amp resettable breaker and 14 gauge SJT power cord with molded plug.

The Intermatic IG2012B153 Type 3 Point-of-Use Surge Protective device is designed for heavy industrial use with 3-mode surge protection (L-N, L-G, N-G). It features a 15 Amp resettable breaker and 14 gauge SJT power cord with molded plug.

The Intermatic Coaxial Cable Protector in a NEMA 1 (indoor) enclosure for a single coax line. The unit has two F-thread connectors for IN and OUT connections plus a bonded ground lead. A second coax line protector may be added to the enclosure by ordering an additional 'IG1C'. Although the unit is designed for surface mounting, an 'IGFLUSH' flush mounting kit is available. 

The Intermatic Coaxial Cable Protector in a NEMA 3 (indoor/outdoor) enclosure for a single coax line, expandable up to 6 lines. The unit has two F-thread connectors for IN and OUT connections plus a bonded ground lead.

The Intermatic IG1C Coax Cable Protector features two F-thread connectors and a removable stainless steel plate for installation in NEMA 3R enclosures.

This Intermatic unit is a flushmount plate for IG1200RC3/IG1240RC3 surge protectors and includes faceplate, screws and mounting bracket.

The Intermatic IG120RSM20 is a consumable module replacement. It features a 20kA nominal discharge and a 100kA short circuit current rating. This model is specifically designed for IG2280 series surge protective devices.