Electrical

The Intermatic IG112663 Type 3 Point-of-Use Surge Protective device is designed for heavy industrial use with 3-mode surge protection (L-N, L-G, N-G). It features a 15 Amp resttable breaker and 14 gauge SJT power cord with molded plug.

The Intermatic IG112463 Type 3 Point-of-Use Surge Protective device is designed for heavy industrial use with 3-mode surge protection (L-N, L-G, N-G). It features a 15 Amp resttable breaker and 14 gauge SJT power cord with molded plug.

The Coaxial Cable Protector in a NEMA 1 (indoor) enclosure for a single coax line. The unit has two F-thread connectors for IN and OUT connections plus a bonded ground lead. A second coax line protector may be added to the enclosure by ordering an additional 'IG1C'. Although the unit is designed for surface mounting, an 'IGFLUSH' flush mounting kit is available.

The IG2TM Telephone Line Protector in a NEMA 1 (indoor) enclosure is used for two independent lines. The unit has balanced protection between Tip, Ring and Ground for each line. Terminal block type connectors allow installation without special tools. Although the unit is designed for surface mounting, a IGFLUSH flush mounting kit is also available.

The Intermatic IG20663 Type 3 Point-of-Use Surge Protective device is designed for heavy industrial use with 3-mode surge protection (L-N, L-G, N-G). It features a 15 Amp resettable breaker and 14 gauge SJT power cord with molded plug.

Intermatic's flush mount kit id designed for use with Intermatic's IG2240-IMS surge protective device with consumable modules. This optional flush mount kit includes two mounting brackets and eight screws.

Venture Lighting BSP3-277-LC - LC Surge Protector - 277V Surge Protector - 10KA rated - 1500V Max Clamping Voltage

Venture Lighting SP12826 - Surge Protector - 347-480V

Venture Lighting SP12714 - Surge Protector - 120-277V

The Intermatic IG120RSM10 is a consumable module replacement. It features a 20kA nominal discharge and a 100kA short circuit current rating. This model is specifically designed for IG2280 series surge protective devices.

* This is a discontinued model, please refer to the link below for the replacement we suggested

https://www.intermatic.com/en/surge-protection/accessories/ig120rsm10k

The Intermatic AG Series Surge Protective Device (SPD) is designed for a variety of Type 1 and Type 2 applications. Type 1 applications include outdoor installations before service entrances and utility meter cabinets. Type 2 applications include installations after service entrances. CSA listed to ANSI/UL1449 3rd edition, the AG series is approved for outdoor applications including: irrigation equipment, farm equipment, pumps, lighting fixtures, traffic signaling devices, HVACR controls, and motors. In Rating: 20kA. SCCR: 50kA.

The Intermatic AG4803C3 Surge Protective Device (SPD) is designed for a variety of Type 1 and Type 2 applications. Type 1 applications include outdoor installations before service entrances and utility meter cabinets. Type 2 applications include installations after service entrances. CSA listed to ANSI/UL1449 3rd edition, the AG series is approved for outdoor applications including: irrigation equipment, farm equipment, pumps, lighting fixtures, traffic signaling devices, HVACR controls, and motors. In Rating: 20kA. SCCR: 50kA.

The Intermatic AG48013 Surge Protective Device (SPD) is designed for a variety of Type 1 and Type 2 applications. Type 1 applications include outdoor installations before service entrances and utility meter cabinets. Type 2 applications include installations after service entrances. CSA listed to ANSI/UL1449 3rd edition, the AG series is approved for outdoor applications including: irrigation equipment, farm equipment, pumps, lighting fixtures, traffic signaling devices, HVACR controls, and motors. In Rating: 20kA. SCCR: 50kA.

The Intermatic AG Series Surge Protective Devices (SPD) is designed for a variety of Type 1 and Type 2 applications. Type 1 applications include outdoor installations before service entrances and utility meter cabinets. Type 2 applications include installations after service entrances. CSA listed to ANSI/UL1449 3rd edition, the AG series is approved for outdoor applications including: irrigation equipment, farm equipment, pumps, lighting fixtures, traffic signaling devices, HVACR controls, and motors. In Rating: 20kA. SCCR: 50kA.

The AG Series Surge Protective Device (SPD) is designed for a variety of Type 1 and Type 2 applications. Type 1 applications include outdoor installations before service entrances and utility meter cabinets. Type 2 applications include installations after service entrances. CSA listed to ANSI/UL1449 3rd edition, the AG series is approved for outdoor applications including: irrigation equipment, farm equipment, pumps, lighting fixtures, traffic signaling devices, HVACR controls, and motors. In Rating: 20kA. SCCR: 50kA.

The AG Series Surge Protective Devices (SPD) is designed for a variety of Type 1 and Type 2 applications. Type 1 applications include outdoor installations before service entrances and utility meter cabinets. Type 2 applications include installations after service entrances. CSA listed to ANSI/UL1449 3rd edition, the AG series is approved for outdoor applications including: irrigation equipment, farm equipment, pumps, lighting fixtures, traffic signaling devices, HVACR controls, and motors. In Rating: 20kA. SCCR: 50kA.

The Intermatic IG2240OM is a surge protective device. This model is designed for SPD type 2 indoor or outdoor applications and features 6 modes of protection. This device has tamper proof consumable module doors and utilizes the TPMOV technology. The Intermatic IG2240OM features a metal housing which ensures lengthier lifespan. It also has a type 3R rainproof enclosure. This single phase surge protective device operates with a service voltage rate of 120 or 240 VAC.

Protect it all with Intermatic's surge protective device with consumable modules. Today's technologies in homes and small businesses require the most comprehensive surge protection on the market. Intermatic's Surge Protective Device (SPD) with Consumable Modules, provides coverage for 100% of your big investment equipment, from appliances and computers, to HVAC equipment and TVs. The Surge Protective Device uses replaceable Consumable Modules that allows you to easily and safely replace a module when the built-in LED light indicates it has been compromised. The Intermatic IG2240-IMS Surge Protector, 120/240V Whole House Hardwired features six modes of protection and is recommended for residential and light commercial applications.

The Intermatic IG2240IM is a surge protective device. This model is designed for SPD type 2 indoor applications and features has 6 modes of protection. This device has tamper proof consumable module doors and utilizes the TPMOV technology. The Intermatic IG2240IM features a metal housing which ensures lengthier lifespan. This single phase surge protective device operates with a service voltage rate of 120 or 240 VAC.