Electrical

Telephone line protection for two separate lines;Unit has balanced protection between tip, ring, and ground for each line;Terminal block type connectors;Easy to install without special tools

120 VAC Surge Replacement Module. For use with the following surge panels: 52120-M1 (1), 52120-M3 (3), 52412-DS3 (2), 52120-CM2 (2), 52120-M2 (2), 52120-CM3 (3), 52412-DS3 (2)

Invest in peace of mind with the AG3000! The easy-to-install AG3000 surge protector is the perfect add-on for HVAC equipment. It features unmatched surge protection ratings and a 3-year, $7,500 connected equipment warranty.

The IG Series Surge Protective Devices are designed for a variety of Type 1 and Type 2 applications. Type 1 applications include outdoor installations before service entrances and utility meter cabinets. Type 2 applications include installations after service entrances. CSA listed to ANSI/UL 1449 3rd edition, the IG series is approved for residential/light commercial services (AC power, telephone and/or cable).

The Intermatic IG1300-4T-2C3 AC Surge Protector provides protection for 4 telephone lines (analog phone line, modem, or DSL) and 2 coax lines (cable TV, cable internet or satellite TV). Protect all your valuable home or small business electronics from transient surges with the Intermatic IG1300-4T-2C3 hardwired surge protective device. It provides greater capacity to handle surge energy (based on the close location to the service ground) compared to standard plug-in strips and is designed for 120/240-Volt single or single split-phase panels.

The Intermatic IG1300-2T-1C3 AC Surge Protector provides protection for 2 telephone lines (analog phone line, modem, or DSL) and 1 coax line (cable TV, cable internet or satellite TV). Protect all your valuable home or small business electronics from transient surges with the Intermatic IG1300-2T-1C3 hardwired surge protective device. It provides greater capacity to handle surge energy (based on the close location to the service ground) compared to standard plug-in strips and is designed for 120/240-Volt single or (split-phase) panels.

This hardwired Panel Surge Protector provides greater capacity to handle surge energy (based on its close location to the service ground) compared to standard plug-in strips and is designed for 120/240 volt single or (split-phase) panels. It features dual LED indicators which provide surge protection status on AC and (4) 30 inch 12-gauge leads. Offers 6 Mode protection for the sensitive electronic circuits in your computer, components and electronic appliances. When a surge occurs, the unit responds within 5 nanoseconds, diverting the destructive energy to ground while protecting equipment. Easy to install on main circuit breaker panel.

Flush Mount Plate Kit, includes faceplate, screws and mounting bracket for IG200RC3 / IG1240RC3

The Intermatic IG1240RC3 AC Surge Protector features six modes of protection and is recommended for residential and light commercial applications. It is intended for installation on 120/240 volt AC panels. The IG1240RC3 incorporates the newest developments in MOV technology and provides individual component thermal protection and monitoring. The failure of a single component will turn the LED indicator OFF and turn the alarm indicator ON. The IG Series Surge Protective Devices are designed for a variety of Type 1 and Type 2 applications. Type 1 applications include outdoor installations before service entrances and utility meter cabinets. Type 2 applications include installations after service entrances.

120/240 VAC single phase arrester in clamshell packaging. ANSI/UL1449 3rd Edition.

The Intermatic AG6503L3 surge arrester is used to maintain any potential power disturbances. It comes in a weatherproof and UV resistant housing, has 3 poles, and 36-inch leads. It is rated for a maximum voltage of 600 volts and has three phases. This surge arrester is UL and CSA cerified for outdoor use. 1 Year Warranty.

Mounting bracket for Types 1 and 2 Surge Protective Devices ArresterGuard

The Intermatic AG6503C3 surge arrester is used to maintain any potential power disturbances. It comes in a weatherproof and UV resistant housing, has 3 poles, and 18-inch leads. It is rated for a maximum voltage of 600 volts and has three phases. This surge arrester is UL and CSA cerified for outdoor use. 1 Year Warranty.

240 VAC Surge Replacement Module. For use with the following surge panel: 52240-DM3 (3)

277 VAC Surge Replacement Module. For use with the following surge panels: 52277-M3 (3), 52277-CM3 (3), 52277-M3 (3)

240 VAC Surge Replacement Module. For use with the following surge panel: 52412-DS3 (1)

The Intermatic IG2280P is a surge protective device. This model is designed for SPD type 2 indoor or outdoor applications and features 6 modes of protection. This device has tamper proof consumable module doors and utilizes the TPMOV technology. The Intermatic IG2280P features a plastic housing which ensures lengthier lifespan. It also has a type 3R rainproof enclosure. This single phase surge protective device operates with a service voltage rate of 120 or 240 VAC.

The Intermatic IG2280OM is a surge protective device. This model is designed for SPD type 2 indoor or outdoor applications and features 6 modes of protection. This device has tamper proof consumable module doors and utilizes the TPMOV technology. The Intermatic IG2280OM features a metal housing which ensures lengthier lifespan, plastic housing is available. It also has a type 3R rainproof enclosure. This single phase surge protective device operates with a service voltage rate of 120 or 240 VAC.

The Intermatic IG2280IM is a surge protective device. This model is designed for SPD type 2 indoor applications and features 6 modes of protection. This device has tamper proof consumable module doors and utilizes the TPMOV technology. The Intermatic IG2280IM features a metal housing which ensures lengthier lifespan. This single phase surge protective device operates with a service voltage rate of 120 or 240 VAC.