Electrical

The Intermatic PF1102 is a onecircuit freeze protection control that includes a thermostat in type 3R steel enclosure for 240V installations. This control is created for protection of pool and spa equipment against freezing. When temperature drops below the thermostat set one, which is useradjustable, the control turns On the pump with the heater. You can also easily connect the model to a timer or switching device to both control and freezeprotect your equipment.

Water-resistant backlit display shows time of day, equipment status and water and air temperature - Programs and displays all on/off schedules, thermostat settings, time of day and variable pump speeds - Internal memory backup retains communication link during power outages - Ability to copy programming to additional remote controls - Uses three AA batteries (included)

Controls variable speed pumps and two-speed pumps - Included wireless transmitter allows you to control your pool or spa while relaxing in your backyard - Control 5 generic loads for single and two-speed filter pumps, cleaner pumps, pool lights, spa lights, landscape lights, fountains and water features - Enclosure for use as wiring compartment - For 120 or 240 Volt applications

Can be used with Intermatic PE953, P1353ME, P4243ME, P4043ME - Used to control gas or electric heater thermostat - Parts can be added or replaced without interfering with the original system - Modules are capable of working within a system or independently - Receiver, antenna and instructions included

Includes one P1353ME mechanism - Countdown and override features allow programs to be interrupted for service and automatically resumed without reprogramming your system - 48/1000-Inch steel with electrostatically applied light beige finish enclosure - 26-Inch (66.3 cm) Height by 18-Inch (45.9 cm) Width by 5-1/2-Inch (14.0 cm) Diameter - 125-Amps, 120, 240 VAC or 120, 208 VAC single phase

The Intermatic PE40000 is a 125 Amp control system with type 3R load center. This model contains all necessary controls for the efficient, safe, and automatic operation of your pool and spa equipment in one panel. With this model it is easy to turn your digital control of PE series into a wireless control system.

Includes one P1353ME mechanism;Countdown and override features allow programs to be interrupted for service and automatically resumed without reprogramming your system;48/1000-Inch steel with electrostatically applied light beige finish enclosure

Includes P1353ME and a radio remote control Multi-voltage input and output Controls single and two-speed pumps and cleaner/booster pumps Three ON/OFF events per circuit per day Seven pre-programmed modes Freeze and heater protection Replaces 3 mechanical timers all-in-one Countdown and override features enable programs to be overridden and automatically resumed without requiring the user to reprogram the system Fireman's switch connection

This inerratic 3 circuit switch is for 1 and 2 speed pumps. It can control up to 3 circuit and 3 ON/OFF events per day. There are 7 pre-programmed combinations to choose from.

Intermatic Time Clock Timer Mechanism Panel Mount 24hr 120V SPST 20A

Provide automatic control for pumps, cleaners and other types of loads - Quick connect terminals for easy installation - Timers have three-way mounting; flush in round opening, raised in rectangular opening or on base - Black housing with white screening and orange trippers - 8 oz (0.22 kg) All mechanisms are shipped in bulk (36 per carton) unless otherwise specified

Add Automated Timer Control to Freeze Protection Systems 7 Day Timer Control Allows for Increased Adjust-ability

7 Day, 120-Volt AC - Specially suited for applications where equipment needs to be cycled ON and OFF up to 8 times per day - Rugged construction, resistance to surges and humidity, operate between wide temperature extremes - A light indicator illuminates when the timer is in the ON position - Select feature allows timers to be continuously ON, OFF or in AUTO mode

24-Hour model Perfect for applications where equipment needs to be cycled ON/OFF up to 8 times per day Select feature enables timers to be continuously ON, OFF, or in AUTO mode Rugged construction 3-year service life replaceable lithium battery

This Intermatic digital timer allows you to add automated timed control of your freeze protection controller for increased versatility and convenience. This timer works in unison with the freeze protection controller to ensure that your pool or spa are safe from the danger of freezing over.

24-Hour model Perfect for applications where equipment needs to be cycled ON/OFF up to 8 times per day Select feature enables timers to be continuously ON, OFF, or in AUTO mode Rugged construction 3-year service life replaceable lithium battery

24 Hour, 120-Volt AC - Specially suited for applications where equipment needs to be cycled ON and OFF up to 8 times per day - Rugged construction, resistance to surges and humidity, operate between wide temperature extremes - A light indicator illuminates when the timer is in the ON position - Select feature allows timers to be continuously ON, OFF or in AUTO mode

To relocate the antenna and ensure communication between the Hand-Held and control center - Can be used with the Intermatic PE650 - Can be used with the Intermatic PE953 - Can be used with the Intermatic PA122 - Ensuring that communication between the Hand-Held unit and the control center is successful.

To relocate the antenna and ensure communication between the Hand-Held and control center - Can be used with the Intermatic PE650 - Can be used with the Intermatic PE953 - Can be used with the Intermatic PA122 - Ensuring that communication between the Hand-Held unit and the control center is successful.