Electrical

Load Center with T106M, T104M mechanisms Easy to wire Can house additional Intermatic mechanisms and components Heavy-duty Type 3R steel indoor/outdoor power center Applicable to filter pumps, blowers, low voltage pool/spa lighting, low voltage outdoor lighting.

100-Watt Transformer;Contains one T104M mechanism;cost effective electrical control center for any pool or spa installation;The T40000RT Series panels will accept additional Intermatic mechanisms and/or components;Easy to wire and extremely cost effective

300-Watt Transformer;Contains one T103M mechanism;cost effective electrical control center for any pool or spa installation;The T40000RT Series panels will accept additional Intermatic mechanisms and/or components;Easy to wire and extremely cost effective

Intermatic T40000RT3 Timer Control System w/300W Transformer & Load Center

Intermatic T30604R Pool/Spa Control Panel T106M and T104M

Intermatic T30401R Pool/Spa Control Panel T104M/T101M

Can be used with Intermatic 101M;All-weather enclosure;Contain a 4 circuit breaker base, an equipment grounding bar and a mechanical time switch mechanism;The circuit breaker base accepts interchangeable type breakers made by a several manufacturers;Enclosure has provision for installing additional switches or GFCI receptacles on the side and inside

Provides up to 96 operations (48 ON/48 OFF) every 24 hours - 125 Volts AC - Minimum ON/OFF time 15 minutes - Trippers slide in and out of dial for fast, accurate setting - SPDT switch

The Intermatic PF1222TB1 is a control system with freeze protection and load center. This control contains two switches and is specifically created for protection of pool and spa equipment against freezing. When the temperature drops below the thermostat set one, which is useradjustable, the control turns On the pump with the heater. There is also a spot to set an extra timer inside or a receptacle for GFCI on the side of enclosure. The Intermatic PF1222TB1 is similar to PF1222T, but additionally contains a 4/8 breaker panel. With this model, your equipment is both automated and protected due to the time control and freeze protection.

Replacement thermostat relay assembly for PF1202T & PF1222TB

Synchronous drive (no battery back up) - 21 Amp SPDT switch - Captive trippers with 2-hour intervals - 1/4-Inch quick-connect terminals - 3-way override

Synchronous drive (no battery back up) - 21 Amp SPDT switch - Captive trippers with 2-hour intervals - 1/4-Inch quick-connect terminals - No override

Synchronous drive (no battery backup) - 21 amp spdt switch - Captive trippers with 2-hour intervals - True clock face, easy-to-set - Clear plastic dust cover

Synchronous drive (no battery back up) - 21 Amp SPDT switch - Captive trippers with 2-hour intervals - 1/4-Inch quick-connect terminals - No override

Synchronous drive (no battery back up) - 21 Amp SPDT switch - Captive trippers with 15-minute intervals - 1/4-Inch quick-connect terminals - 3-way override

Synchronous drive (no battery back up) - 21 Amp SPDT switch - Captive trippers with 15-minute intervals - 1/4-Inch quick-connect terminals - 3-way override

Synchronous drive (no battery backup) - 21 amp spdt switch - Captive trippers with 15-minute intervals - True clock face, easy-to-set - Clear plastic dust cover

Synchronous drive (no battery back up) - 21 Amp SPDT switch - Captive trippers with 15-minute intervals - 1/4-Inch quick-connect terminals - 3-way override

Synchronous drive (no battery back up) - 21 Amp SPDT switch - Captive trippers with 15-minute intervals - 1/4-Inch quick-connect terminals - No override