Electrical

Quartz drive with battery backup - 21 Amp SPDT switch - Captive trippers with 15-minute intervals - 1/4-Inch quick-connect terminals - 3-way override

Quartz drive with battery backup - 21 Amp SPDT switch - Captive trippers with 15-minute intervals - 1/4-Inch quick-connect terminals - No override

Quartz drive with battery backup - 21 Amp SPDT switch - Captive trippers with 15-minute intervals - 1/4-Inch quick-connect terminals - No override

Synchronous drive (no battery back up) - 21 Amp SPDT switch - Captive trippers with 2-hour intervals - 1/4-Inch quick-connect terminals - 3-way override

Synchronous drive (no battery back up) - 21 Amp SPDT switch - Captive trippers with 2-hour intervals - 1/4-Inch quick-connect terminals - 3-way override

Synchronous drive (no battery back up) - 21 Amp SPDT switch - Captive trippers with 2-hour intervals - 1/4-Inch quick-connect terminals - 3-way override

Synchronous drive (no battery back up) - 21 Amp SPDT switch - Captive trippers with 2-hour intervals - 1/4-Inch quick-connect terminals - No override

Synchronous drive (no battery back up) - 21 Amp SPDT switch - Captive trippers with 2-hour intervals - 1/4-Inch quick-connect terminals - No override

Synchronous drive (no battery back up) - 21 Amp SPDT switch - Captive trippers with 2-hour intervals - 1/4-Inch quick-connect terminals - No override

Synchronous drive (no battery back up) - 21 Amp SPDT switch - Captive trippers with 15-minute intervals - 1/4-Inch quick-connect terminals - 3-way override

Synchronous drive (no battery back up) - 21 Amp SPDT switch - Captive trippers with 15-minute intervals - 1/4-Inch quick-connect terminals - 3-way override

Synchronous drive (no battery back up) - 21 Amp SPDT switch, 50 HZ - Captive trippers with 15-minute intervals - 1/4-Inch quick-connect terminals - 3-way override

24-Hour Electromechanical Timer Module w/Battery Backup, 21Amps, SPDT, 120 Volt, Minimum ON/OFF Time 15 minutes, Surface Mounting, NO Override Function.

24 Hour, 120-Volt AC - Specially suited for applications where equipment needs to be cycled ON and OFF up to 8 times per day - Rugged construction, resistance to surges and humidity, operate between wide temperature extremes - A light indicator illuminates when the timer is in the ON position - Select feature allows timers to be continuously ON, OFF or in AUTO mode

Intermatic 178T24 THERMOSTAT FOR FP1102T/PF1103T

Water-resistant backlit display shows time of day, equipment status and water and air temperature - Programs and displays all on/off schedules, thermostat settings, time of day and variable pump speeds - Internal memory backup retains communication link during power outages - Ability to copy programming to additional remote controls - Uses three AA batteries (included)

Controls variable speed pumps and two-speed pumps - Included wireless transmitter allows you to control your pool or spa while relaxing in your backyard - Control 5 generic loads for single and two-speed filter pumps, cleaner pumps, pool lights, spa lights, landscape lights, fountains and water features - Enclosure for use as wiring compartment - For 120 or 240 Volt applications

Can be used with Intermatic PE953, P1353ME, P4243ME, P4043ME - Used to control gas or electric heater thermostat - Parts can be added or replaced without interfering with the original system - Modules are capable of working within a system or independently - Receiver, antenna and instructions included

Includes one P1353ME mechanism - Countdown and override features allow programs to be interrupted for service and automatically resumed without reprogramming your system - 48/1000-Inch steel with electrostatically applied light beige finish enclosure - 26-Inch (66.3 cm) Height by 18-Inch (45.9 cm) Width by 5-1/2-Inch (14.0 cm) Diameter - 125-Amps, 120, 240 VAC or 120, 208 VAC single phase