Electrical

Includes one P1353ME mechanism;Countdown and override features allow programs to be interrupted for service and automatically resumed without reprogramming your system;48/1000-Inch steel with electrostatically applied light beige finish enclosure

The Intermatic PE34065RCT3 is a kit for pool use. It comes with an outdoor enclosure with dimensions of 16.5 x 10 x 4.75 inches. It comes with the PE653RC MultiWave ZWave wireless control system, an 80Amp breaker base, and a 300watt transformer. This Intermatic kit also comes with a valve actuator control and two compatible 24volt pool/spa water valve actuators.

OUTDOOR ENCLOSURE WITH 80 AMP BUS & PE653RC RADIO CONTROL (MULTIWAVE)

The Intermatic PE30065RCT3 is a kit for pool use. It comes with an outdoor enclosure with dimensions of 16.5 x 10 x 4.75 inches. It comes with the PE653RC MultiWave ZWave wireless control system, an 80Amp breaker base, and a 300watt transformer.

The Intermatic PE30065RC is a 80 Amp, type 3R load center with the PE653RC MultiWave radio control for pool and spa control systems. This model contains all the necessary controls for the efficient, safe, and automatic operation of your pool and spa equipment in one panel. With this model it is easy to turn your digital control of PE series into a wireless control system. Get the Intermatic PE30065RC with included radio control and make it a fully operative system.

The Intermatic PE30000T3 is a 80 Amp control system with a 300W transformer and type 3R load center for pool and spa control systems. This model contains all necessary controls for the efficient, safe, and automatic operation of your pool and spa equipment in one panel. With this model it is easy to turn your digital control of PE series into a wireless control system.

PE Outdoor Enclosure with 80 Amp Bus

Includes P1353ME For a pool/spa combo Load center with four position 60 Amp breaker base Two knockouts for GFCIs and switches Controls 5 circuits Full thermostat control Operates single, two, and variable-speed pumps 24-hour scheduling capability for all connected equipment Type 3R indoor/outdoor 0.048" steel load center

Includes one P1353ME mechanism - Countdown and override features allow programs to be interrupted for service and automatically resumed without reprogramming your system - 48/1000-Inch steel with electrostatically applied light beige finish enclosure - 60-Amps, 120, 240 VAC or 120, 208 VAC single phase

The Intermatic PF1102 is a onecircuit freeze protection control that includes a thermostat in type 3R steel enclosure for 240V installations. This control is created for protection of pool and spa equipment against freezing. When temperature drops below the thermostat set one, which is useradjustable, the control turns On the pump with the heater. You can also easily connect the model to a timer or switching device to both control and freezeprotect your equipment.

Mechanism only 240 VAC, 3HP - Used to protect pool and spa equipment and plumbing against freeze damage - They turn the pump and heater ON when the outdoor temperature drops below the temperature set by the user-adjustable thermostat - 34/1000-Inch drawn steel, electrostatically coated, beige color enclosure

The sensor is designed to protect the pool and spa equipment and plumbing against freeze damage. The sensor plugs into the circuit board on the back of the P1353ME and turns ON the filter pump when air temperature drops below the programmed temperature. The freeze programming mode will not appear unless the sensor is plugged into the clock.

Provide remote control for one, two or three separate loads - Enables the user to operate a pump, a blower and a light up to 75 feet away - Have a 24-hour digital, multiple program timer - Enclosure For Indoor/Outdoor installations, beige plastic

The Intermatic RC2103S is an air actuated remote control. This model is designed to allow control of pool pump, heater, air blower, or lights from the side of the pool with an air button and tubing without risk of electric shock (air hose and button are not included). You can increase safety by controlling spa applications with the Intermatic RC2103S.

The Intermatic RC127B is an air switch button and 75 ft. tubing for Gunite spas. This model is designed to allow control of pool pump, heater, air blower, or lights from the side of the pool with an air button without risk of electric shock. You can increase safety by controlling spa applications with the Intermatic RC127B. This model is also approved by CSA/CUS.

Tubing is run from the air button to the air control. When the air button is pushed a blast of air travels through the tubing and engages the air control.

Up to 44 ON/OFF settings per day Water metering increments from 12 minutes to 20 hours and 45 minutes 14-Day Skipper enables irrigation to be omitted on selected day(s) Provides for every other day operation ON/OFF/AUTOMATIC switch enables shutdown during rainy days and extended watering during dry periods without disturbing the cycle set on dial

Designed to supply 12 volts to pool/spa lights, submersible fixtures and outdoor garden lights - Grounded shield between the primary and secondary windings - Built-in circuit protection

Designed to supply 12 volts to pool/spa lights, submersible fixtures and outdoor garden lights - Grounded shield between the primary and secondary windings - Built-in circuit protection