Electrical

This Intermatic digital timer allows you to add automated timed control of your freeze protection controller for increased versatility and convenience. This timer works in unison with the freeze protection controller to ensure that your pool or spa are safe from the danger of freezing over.

The Intermatic PC2-120 is a twochannel light controller with a single channel switch from the LightMaster PC series. Based on the amount of natural light in an area, this lighting control system is designed to control one or two circuits independently.

The Intermatic PC2120LS2 is a twochannel light controller with a single channel switch and an LS2 sensor from the LightMaster PC series. Based on the amount of natural light in an area, this lighting control system is designed to control one or two circuits independently.

ONE EMPTY 16.5 X 10 X 4.75 IN. PE OUTDOOR ENCLOSURE WITH 60 AMP BUS

The Intermatic PE20065RC is a 60 Amp pool and spa control system with type 3R load center. This model contains all the necessary controls for the efficient, safe, and automatic operation of your pool and spa equipment in one panel. With this model it is easy to turn your digital control of PE series into a wireless control system. Get the Intermatic PE20065RC with included radio control and make it a fully operative system.

Controls up to 5 loads - 100 amp circuit breaker bus - 120VAC and 240 VAC capabilities - System displays status of each of the 4 on-demand circuits and pool/spa water temperature - Approved for direct connect of lights

Includes P1353ME and a radio remote control Multi-voltage input and output Controls single and two-speed pumps and cleaner/booster pumps Three ON/OFF events per circuit per day Seven pre-programmed modes Freeze and heater protection Replaces 3 mechanical timers all-in-one Countdown and override features enable programs to be overridden and automatically resumed without requiring the user to reprogram the system Fireman's switch connection

This inerratic 3 circuit switch is for 1 and 2 speed pumps. It can control up to 3 circuit and 3 ON/OFF events per day. There are 7 pre-programmed combinations to choose from.

For 1 and 2-speed pumps;Controls 3 circuits;3 ON/OFF events per day;7 pre-programmed combinations to choose from;Add on other pool/spa related devices

Controls a total of three timed circuits, including single speed or two-speed filter pumps, pool lights, spa lights and landscape lights;Countdown and override features allow programs to be interrupted for service and automatically resumed without reprogramming your system;48/1000-Inch steel with electrostatically applied light beige finish enclosure

Controls a total of three timed circuits, including single speed or two-speed filter pumps, pool lights, spa lights and landscape lights;Countdown and override features allow programs to be interrupted for service and automatically resumed without reprogramming your system;48/1000-Inch steel with electrostatically applied light beige finish enclosure

Controls up to 5 loads - 100 amp circuit breaker bus - 120VAC and 240 VAC capabilities - System displays status of each of the 4 on-demand circuits and pool/spa water temperature - Approved for direct connect of lights

The Intermatic PE14065RC is a kit for pool use. It comes with an outdoor enclosure with dimensions of 14.75 x 14.75 x 4.25 inches. It comes with the PE653RC MultiWave ZWave wireless control system, a valve actuator control, and two compatible 24volt pool/spa water valve actuators.

The Intermatic valve actuator control is an affordable control that would only automate a set of water valves from the pool position to the spa position. It can turn a single water valve to engage a water feature. Easily snap into most existing Intermatic enclosures with available mechanism support bracket. Controls up to three valve actuators. Switches heater and thermostat HIGH/LOW and features remote control capabilities.

ONE P1403ME IN 9.375 X 5.5 X 3.625 IN. STEEL OUTDOOR ENCLOSURE

ONE EMPTY 14 3/4 X 14 3/4 X 4.25 IN. PE OUTDOOR ENCLOSURE

The Intermatic PC2120LS1 is a twochannel light controller with a single channel switch and an LS1 sensor from the LightMaster PC series. Based on the amount of natural light in an area, this lighting control system is designed to control one or two circuits independently.