Electrical

Room Controller, PRC, Indoor, Line Voltage, Low Profile, 1 Zone, Ceiling Mount, Multi-Technology, 2000 sq ft, occupancy sensor lighting control, (1) 0-10V DC Sinking Control Signal for dimming ballast or LED Driver. 1 Relay, 120-277V AC.

Room Controller, Indoor, Line Voltage, Low Profile, 2 Zone, Ceiling Mount, Multi-Technology, 2000 sq ft, occupancy sensor lighting control, (2) 0-10V DC Sinking Control Signal, for dimming ballast or LED Driver, 2 Relay, 120-277V AC.

24VDC, 25mA power consumption, 180 degree (major motion: PIR:20' radius; U/S: 23'Lx23'W, minor motion: U/S: 17'Lx17'W), red LED=PIR, green LED=U/S, auto adapting, walk-through, time delay 30s-30m, test mode (6s time delay for 15m with auto exit), connect gray wire for photocell ambient light hold-off, 360 degree harmonic wheel (rotatable), mounting height 8'-10'

24VDC, 35mA power consumption, 1000 sq ft, 360 degree (major motion: PIR: 40' diameter; U/S: 46'Lx23'W, minor motion: U/S: 34'Lx17'W), red LED=PIR, green LED-U/S, auto adapting, walk-through, time delay 30s-30m, test mode (6s time delay for 15m with auto exit), connect gray wire for photocell ambient light hold-off, 360 degree harmonic wheel (rotatable), mounting height 8'-10'

24VDC, 30mA power consumption, 2000 sq ft, 360 degree (major motion: PIR: 40' diameter; U/S:64'Lx32'W, minor motion: U/S: 45'Lx23'W), red LED=PIR, green LED=U/S auto adapting, walk-through, time delay 30s-30m, test mode (6s time delay for 15m with auto exit), connect gray wire for photocell ambient light hold-off, 360 degree harmonic wheel (rotatable), mounting height 8'-10'

The Intellect Sensor Control Module (SCM) is designed for mounting directly into lighting fixtures for use in an Intellect-enabled Intelligent Fixture Control System. The SCM integrates PIR occupancy sensing and photocell technology in a single compact unit. Integrate with downlights, track fixtures and other general lighting to create an advanced intelligent lighting control system that complies with energy codes.

Occupancy Sensor, Photocell, Wireless PIR, 1,500 sq ft

Zigbee Battery/24V Combo Occupancy Sensor and Photocell Sensor

The Leviton Zigbee Passive Infrared (PIR) Occupancy Sensor and Photocell (ZC015) is a communication device designed to be used as a part of larger wireless system to communicate occupancy and/or light levels to a Leviton Room Controller or Zigbee 3.0 compatible room controller/gateway. The ZC015 uses innovative sensing technology with a digital PIR sensor located directly behind a unique multi-zone optical lens. ZC015 is also equipped with a high-resolution digital photocell for applications that require daylight harvesting or ambient light hold-off.

IOS-PP25 is a power pack with a 120 to 277 VAC, 50/60 Hz line voltage input. The power pack contains a full wave rectifier which can convert AC line voltage to 24 VDC to supply sensors with class 2 low voltage. Also, the power pack provides singlepole, single-throw, relay outputs to the load. The power pack is easily mounted either inside or outside of an electrical junction box.

Compact Fluorescent Lampholder with Occupancy Sensor, White, with 13W CFL Bulb and Clear Polycarbonate Lamp Guard - 13W/60Hz

* This model is discontinued and substitued by Leviton 9864-LED

Leviton 9864-LED No wall switch required, lights turn on automatically when motion is detected and off after 3-minutes of inactivity. 8.7W 120VAC, Lighting Output 800Lumen, 4000K Cool White Light.

Leviton Video: How to Install the LED Ceiling Occupancy Sensor Lampholder 

* Replace Leviton 9863-OCC 13W CFL Lampholder with Occupancy Sensor.

The CL106P-109WM-PF3N fixture is the perfect solution for closets, garbage rooms, or any small space where lighting could accidentally be left on. It is designed for a quick and easy installation with keyless slots for both 3” & 4” j-boxes. The frosted polycarbonate lens provides even illumination.

* This model has been replaced by its upgraded version - CL108P-115WM-PFCN, please refer to the specification sheet for more details

Designed for indoor use only, these devices are a cost saving solution for lighting in closets, workrooms, basements, storage areas, utility rooms and attics. Leviton 10W 800Lumen 3000K Bright White GU24 Base LED Bulb included. 

LED Ceiling Keyless Lampholder with GU24 LED Lamp and Guard, 10W-120VAC, 60Hz, Energy Star Qualified, White

Automatically turn on when motion is detected, adjustable time delay: from 15 seconds to 30 minutes. Single pole, Coverage range up to 30ft mounting, 360 degrees. Input 120-347V, Load 800VA@120V, 1200VA@277V, 1500VA@347V

* This is a discontinued model, please refer to the link below for the replacement we suggested

https://www.bulbspro.com/senpir-hb-01.html

36” Connection Cable, Black, Title 24 Compliant, ASHRAE 90.1 Compliant

PIR Fixture Mount High Bay Occupancy Sensor with Light Sensor (photocell), 120-347V, Title 24 Compliant, ASHRAE 90.1 Compliant

* This item has been discontinued, please refer to the link below for the replacement suggested by the supplier

https://www.bulbspro.com/leviton-hb011-pdx.html

Lutron FCJS-010-BULK8 - Vive PowPak Wireless Fixture Control Module - 6 mA Max Control Current - 120 –277 V - A bulk pack of 8 pieces

Lutron FCJS-ECO-BULK8 - Vive PowPak Fixture Control - EcoSystem LED Driver/Fluorescent Ballast - 120-277 V - A Bulk Pack Of 8 Pieces

Automatically turn on when motion is detected, adjustable time delay: from 30 seconds to 25 minutes. Single pole, Coverage range up to 35ft mounting, 360 degrees. Input 120-347V, Maximum Loading 800VA@120Vac, 1200VA@277Vac, 1500VA@347Vac