Electrical

Siemens EQS260 - Circuit Breaker Enclosures for Service Entrance and Commercial Use - EEMAC 1 Enclosure (Indoor) - 1 phase 3 wire - 60A MAX - 240VAC - 14-4(70) Lug Data

Siemens EQS2125 - Circuit Breaker Enclosures for Service Entrance and Commercial Use - EEMAC 1 Enclosure (Indoor) - 1 phase 3 wire - 125A MAX - 240VAC - 14-2/0(86) Lug Data

Siemens EQ4 Loadcentre with 200A Main Breaker, 42 Circuits, 3PH 4W 120/208V, Type 1, Aluminum Bus, with Grey color Door. Certified for use with either plug-in (Type Q) or bolt-on (Type BQ) branch breakers. Number of circuits can be doubled by use of plug-in (Type QT) twin breakers. Certified for mounting vertical, horizontal or inverted and for use with CU/AL conductor including compact stranded.

30 Amp, 600 Volt, Toggle Three-Pole AC Motor Starting Switch In Type 1 Thermoplastic Enclosure with Metal Back Plate, Industrial Grade, Grounded To Enclosure, Back & Side Wired , Gray

The IG2TM Telephone Line Protector in a NEMA 1 (indoor) enclosure is used for two independent lines. The unit has balanced protection between Tip, Ring and Ground for each line. Terminal block type connectors allow installation without special tools. Although the unit is designed for surface mounting, a IGFLUSH flush mounting kit is also available.

The Coaxial Cable Protector in a NEMA 1 (indoor) enclosure for a single coax line. The unit has two F-thread connectors for IN and OUT connections plus a bonded ground lead. A second coax line protector may be added to the enclosure by ordering an additional 'IG1C'. Although the unit is designed for surface mounting, an 'IGFLUSH' flush mounting kit is available.

The Intermatic IG2280IM is a surge protective device. This model is designed for SPD type 2 indoor applications and features 6 modes of protection. This device has tamper proof consumable module doors and utilizes the TPMOV technology. The Intermatic IG2280IM features a metal housing which ensures lengthier lifespan. This single phase surge protective device operates with a service voltage rate of 120 or 240 VAC.

30 Amp, 600 Volt, Toggle In Type 1 Enclosure, Single Phase Double-Pole AC Motor Starting Switch, Industrial Grade, Grounded To Enclosure, Back & Side Wired, Suitable as a Motor Disconnect - GRAY

30 Amp, 600 Volt, Toggle Three-Pole AC Motor Starting Switch In Type 1 Metal Enclosure, Industrial Grade, Grounded To Enclosure, Back & Side Wired, Suitable as a Motor Disconnect - GRAY

Hubbell Manual Motor Disconnect, Back and Side Wiring, 30A 600V AC, 3 Pole Without Overload Protection, With Type 1 Surface Mount Enclosure.

* This is a discontinued model and is replaced by HBL1379

Siemens Low Voltage Circuit Protection OEM Disconnect & Accessories. Type: OEM DISCONNECT Std: UL A. Rating: 25A F. Rating: 60Hz Material: STEEL Enclosure: TYPE 1 Mounting: DIRECT MOUNT. O. Cycles: 10000 O. Temperature: (-20F-120F) AMBIENT TEMPERATURE Environmental Conditions: INDOOR

Siemens LBRH6 - LBR Type Handles - Direct Mount - Black - TYPE 1 - 3-Pole - 40-60 Amps

Siemens Low Voltage Circuit Protection OEM Disconnect & Accessories. Type: OEM DISCONNECT Std: UL A. Rating: 80-100A No. Of Poles: 3P F. Rating: 60Hz Material: STEEL Enclosure: TYPE 1 Mounting: DIRECT MOUNT. O. Cycles: 10000 O. Temperature: (-20F-120F) AMBIENT TEMPERATURE Environmental Conditions: INDOOR

Siemens Low Voltage Circuit Protection OEM Disconnect & Accessories. Type: OEM DISCONNECT Std: UL F. Rating: 60Hz Material: STEEL Enclosure: TYPE 1 Mounting: DOOR MOUNTED. O. Cycles: 10000 O. Temperature: (-20F-120F) AMBIENT TEMPERATURE Environmental Conditions: INDOOR