Floor Box Receptacle Assemblies

Plated Nickel, single gang cover with furniture feed inserts. Includes gasketed cover with combo 2" and 3/4" threaded holes and (4) mounting screws.

Arlington FLB3520NLTK - Round Metal Cover With Threaded Plugs - Gaskets - 15 Amp Duplex TR Receptacle

Traditional Floor Cover For Use With Leviton 5" Poke Through Floor Box (PT500) Only; Accommodates All Standard Duplex Receptacles. The Flip Lids Are A Double-Hinge Design That Can Open 180 Degrees And Lay Flat; Also Includes Metal Subplate And Pre-Assembled Gasket And Mounting Screws, And Cover Mounting Screws, Nickel

*Poke-Through covers are sold separately from the PT500 system

*Poke-Through covers come with low voltage divider.

For use with Arlington's FLB3500 flush mount floor box, this trim kit finishes your install. The trim kit measures 4" round and comes with round nickel-plated brass cover with two flip lids, gaskets, and a 15A duplex tamper resistant receptacle

"Door-In-Door" Cover For Use With Leviton 5" Poke Through Floor Box (PT500) Only; Includes 2 Flip Lids That Fold Into The Main Lid To Hide All Hinges And Doors While In Use. Will Accommodate Decora-Style Receptacles And QuickPort Inserts; Also Includes Pre-Assembled Gasket And Mounting Screws, Nickel

*Covers are sold separately from the PT500 system.

*Poke-Through covers come with low voltage divider.

Arlington FLBC4580NL - InBox cover kit - Recessed Cover Kit - Brass-plated, w/ Decorator Style Receptacle - Metallic nickel-plated brass cover

Cover kit has an ultra-thin stamped steel flange with a black powder-coated diecast zinc cover. Cover has two threaded openings with a low voltage separator and leveling ring.

Arlingtons round CUT IN Floor Box Kits offer installers the low cost, convenient way to install a duplex receptacle flush with the floor. CUT IN Boxes take a little longer to install than the DROP IN™ box, but you get an installation that is tr

Plated Nickel, three gang frame and cover with furniture feed inserts. Includes three gang frame with gasket, (3) gasketed covers with combo 2" and 3/4" threaded holes and mounting screws.

Arlington FLB6240NL - Nickel-Plated Cover - Two 110V Tamper-Resistant Receptacles

Nickel Three Gang Frame Kit With Flip Lid Cover.
Includes (3) 20A Decorator Style Receptacle (3) Gasket - Low Voltage Insert And Installation Screws. Flip Lid Cover Can Be Opened In Any Direction.

Two low voltage openings. Ultra-thin stamped steel nickel plated flange cover, flush-to-floor in-use and blank cover. Installed UL Listed 20A tamper-resistant decorator-style receptacle.

Furniture Feed Cover For Use With Leviton 5” Poke Through Floor Box (PT500) Only; Includes 2 Screw Caps – 1 Large Cap For Accommodating Data (1.5" Diameter Cap), And 1 Cap For Accommodating Power (0.75" Diameter Cap); Also Includes Pre-Assembled Gasket And Mounting Screws, Nickel

*Poke-Through covers are sold separately from the PT500 system

*Poke-Through covers come with low voltage divider.

Low profile DROP IN floor box kit for the fastest floor box installation. Comes with non-metallic box, round 4" diameter nickel-plated brass cover with two flip lids, non-metallic gasket support plate, gasket, UL listed 15A tamper resistant duplex receptacle, plated steel mounting bracket, NM94 and NM95 cable connectors, (3) #8 x 1/2" flathead screws, and (1) #6 x 1/2" screw. With grounding clip.

Cover Plate for FBBOX-GY and FBLEV-GY Concrete Floor Box System, 2 Duplex Screw Caps & 1 Data Cap

Arlington FLBC4560DNL - RECESSED COVER KIT - Nickel plated Brass - Decorator Style Receptacle

Plated Nickel, two gang frame, blank and slotted covers. Includes two gang recessed frame with gasket and (2) installed 20A receptacles, colored insert, (2) low voltage keystone inserts, (2) gasketed blank covers with mounting screws, (2) dual slotted in-use covers with removable tabs.

Arlington FLB3530NL - Metal Covers With Flip Lids - Covers Cut Edges of Carpet

Plated Nickel, single gang frame and cover with furniture feed inserts. Includes single gang frame with gasket, (1) gasketed cover with combo 2" and 3/4" threaded holes and (4) mounting screws.