Photo Controls

The SK4500K Shorting Cap is a low-profile, locking-type photocontrol cap that closes the receptacle connectors of individual fixtures. This cost-effective solution allows a series of lights to perform as a collective unit (ON/OFF) while protecting the receptacle from outdoor elements.

Lens Sticker Accessory for EK4000 & K4000 Series Photocontrols

Light Guard Accessory for K4100 Series, K4200 Series Thermal Photocontrols

Light Guard Accessory for EK4000 Series Electronic Fix Mount Photocontrols

120-480V 50/60 Hz 15 amp maximum receptacle with 3 colorcoded 12” long, #14 power leads and 4 color-coded 12” long, #18 signal leads.

Advanced LongLife ZeroCross Electronic Instant Response LED Photocontrol, On 1.3-1.7, Off/On Ratio 1.5:1, 105-305V, 1000W Tungsten, 1800VA Ballast,1000W LED, Enhanced 510 Joule MOV Surge Device

Advanced LongLife ZeroCross Electronic Instant Response LED Photocontrol, On 1.3-1.7, Off/On Ratio 1.5:1, 105-305V, 1000W Tungsten, 1800VA Ballast, 8A LED, Enhanced 510 Joule MOV Surge Device

Advanced LongLife ZeroCross Electronic Instant Response LED Photocontrol, On 1.3-1.7, Off/On Ratio 1.5:1, 105-305V, 1000W Tungsten, 1800VA Ballast, 8A LED, Enhanced 510 Joule MOV Surge Device

Delayed Response Utility Grade Thermal-Type Turn-Lock, 480 VAC, Sillicone Sensor, Turn On Is 1 To 3fc - Turn Off To Turn On Ratio Is 5 Max

NightFox electronic photocontrols permanently install on outdoor electrical boxes, in-wall boxes or outdoor lighting fixtures. Ideal for LED fixtures with long-life expectations. Mounts internally to an enclosure with a minimum installation hole size of 5/8” diameter. Comes with 9" wire leads.

NightFox electronic photocontrols permanently install on outdoor electrical boxes, in-wall boxes or outdoor lighting fixtures. Ideal for LED fixtures with long-life expectations. Mounts internally to an enclosure with a minimum installation hole size of 5/8” diameter. Comes with 9" wire leads.

Electronic Button With Aluminum Wall Plate Advanced Long Life Zero Cross Electronic Instant Response LED Photocontrol, On 1.3-1.7, On/Off Ratio 1.5:1, On/Off 105-305V, 1000W Tungsten, 1800VA Ballast, 8A LED, Enhanced 445 Joule MOV Surge Device.

Electronic Button Advanced Long Life Zero Cross Electronic Instant Response LED Photocontrol, On 1.3-1.7, On/Off Ratio 1.5:1, On/Off 105-305V, 1000W Tungsten, 1800VA Ballast, 8A LED, Enhanced 445 Joule MOV Surge Device

1/2" Stem DieCast Zinc, On 1-5fc/Off 3-15fc, 6"Leads, 120/208-277V, 2000W Tungsten, 1800VA Ballast, LED: 600VA/1040-1385VA

1/2" Stem DieCast Aluminum, On 1-5fc/Off 3-15fc, 6"Leads, 120/208-277V, 2000W Tungsten, 1800VA Ballast, 600VA LED

Locking Type Receptacle Gasket

The K171H provides a receptacle for Locking Type photocontrols with dimming capabilities. The connector interface has a 3-prong power connection that is backward compatible with standard photocontrol units. Also, it offers four contact pads per ANSI C136.41 for dimming and additional control or sensor input.

The KPT0170-010 PowerTap allows light pole mounted ancillary devices to have quick access to electrical power. It taps into the power feed of a streetlight by connecting between the photocontrol and locking type receptacle. It does not disturb the operation of the light control unit, and it supports the 7-pin ANSI C136.41 style receptacle and controls.

PowerTap Receptacle - 7-Pin - C136.41 Compliant - Dusk-to-Dawn - 10' cable