Sensor Switch & Dimmer Combination

To improve the field-of-view for deep body fixtures, a separate offset adapter accessory (OSFOA-00W) can be used to position the sensor below the fixture body. The adapter simply snaps into a 1/2-inch knockout on the end of the industrial fixture to attach the sensor.

Watertight Offset Adapter Accessory for Fixture Mount Occupancy Sensors, White

Lumina RF Wireless Surface Mount Daylight Harvesting Photocell. Uses Zigbee HA 1.2 Communication. Powered by a Lithium Battery.

Lumina RF Wireless Surface Mount Daylight Harvesting Photocell. Uses Zigbee HA 1.2 Communication. Powered by a Lithium Battery.

The WS-250 Passive infrared (PIR) Wall Switch Sensor turns lighting on and off based on occupancy and ambient light level. It replaces existing wall switches and fits behind a standard decorator wall plate. Suitable for Offices, Conference Rooms, Break Rooms, Utility Rooms

Lutron RRD-8S-DV-WH - RA2 Select / RadioRA 2 120V-277V - 8A digital switch - White

Acuity Brands WSD PDT 347 WH - Wall Switch Sensor - Passive Dual Technology - 347 VAC - White - Standard Temp/Humidity

* This item has been discontinued. Please refer to the link below for the replacement suggested by the supplier

https://www.bulbspro.com/wsx-pdt-347-wh.html 

Acuity Brands WSD VA WH - Wall Switch Sensor - Passive Infrared (PIR) - Vacancy Only - 120/277 VAC - White - Standard Temp/Humidity

Acuity Brands WSD VA 347 WH - Wall Switch Sensor - Passive Infrared (PIR) - Vacancy Only - 347 VAC - White - Standard Temp/Humidity

Acuity Brands WSD LV R WH - Wall Switch Sensor - Low Voltage - Isolated Low Voltage Relay - 120/277 VAC - White

Synergy ISD BC 120/277 WH M10 - ISD Wall Box Dimmer - Ballast Controller - 120/277 VAC - White

- Programmable without removing switch plate
- Connect up to 9 devices with neutral wiring or up to 2 devices without neutral wiring on a single traveler
- sPODMRA MWO can be used in conjunction with WSXA MWO
- Compatible with 0-10V dimming, Sinks < 50 mA
- Include Screwless Wall Plate: Available in WH
- Each MWO device can switch and dim individually
- Switching and Dimming will be performed simultaneously across the devices connected through the communication wire

Acuity Brands WSXA MWO PDT D WH - Wall Switch Sensor - Multi-way Operation - Passive Dual Technology - 0-10 VDC Dimming - 120-277 VAC - White

Acuity Brands WSXA MWO WH - Wall Switch Sensor - Multi-way Operation - 120-277 VAC - White

Acuity Brands WSXA MWO PDT WH - Wall Switch Sensor - Multi-way Operation - Passive Dual Technology - 120-277 VAC - White

Acuity Brands WSXA WH - Wall Switch Sensor (Occupancy and Daylighting) - 120-277 VAC - White

The passive infrared sensors work by detecting the difference between heat emitted from the human body in motion and the background space. Once the sensor switch is manually turned ON, it can turn a load ON and hold it as long as the sensor detects any motion. After no motion is detected for the set time delay, the load is turned OFF automatically. The sensor switch has one relay (equal to single pole switch); no minimum load requirements.

Decora Occupancy Motion Sensor Light Switch. 180° PIR Automatic-on Wallbox Sensor, single pole, 150W LED/CFL, 250W Incandescent/Halogen, 200VA Magnetic Low Voltage, 250VA Electronic Low Voltage, 2A Resistive, wallplate sold separately.

Decora Vacancy Motion Sensor Light Switch. 180° PIR manual-on, automatic-off, single pole, 150W LED/CFL, 250W Incandescent/Halogen, 200VA Magnetic Low Voltage, 250VA Electronic Low Voltage, 2A Resistive, wallplate sold separately.