Sensor Switch & Dimmer Combination

Occupancy Sensor - Commercial Grade In-Wall 0-10 V Dimming PIR Occupancy/Vacancy Sensor, White

AALED AA-MS-OPS2-WH - Maestro Switch with Occupancy/Vacancy Sensor - White

Lutron MRF2S-1S8A-1OW - Vive - Wall-mount Sensor - Multi-location/Single-pole - 120 V - 8 A Light - 3 A Fan (1/10HP)

Acuity Brands PS 150, Standard Power Supply, 15VDC, 150mA, Black

The Lumina® RF line of wireless Load Control Devices offers three models for 0-10V dimming, phase cut dimming and general-purpose control including receptacle circuit control. The Lumina RF Load Devices wirelessly communicate via a mesh network to a Leviton Wireless Room Controller.

The Wireless Load Control Devices offers three models for 0-10V dimming, phase cut dimming and general purpose switching control including receptacle circuit control.
800W Phase Cut Dimming Power Pack (LU04P) allows for dimming of full phase loads
10A 0-10V Dimming Power Pack (LU107) can be used to dim any 0-10V controlled load
20A ON/OFF Switching Power Pack (LU20S) is an ON/OFF relay that can be used for plug load control, motor loads, or non-dimming luminaires

Outdoor PIR Occupancy sensor to mount internal to task lighting fixtures, 360 degree High Bay lens (20'-40'), 7.5' wire lead length, 24VDC; IP65

Outdoor Passive Infrared (PIR) Occupancy Sensor to mount internal to task lighting fixtures, 360 degree high-bay lens (20-40’), 7.5” wire lead length, 120/208/220/230/240/277/347V

Lithonia Lighting OMS 1000 120 DDB M6 - Motion Sensor - 1000mA - 120V - Dark Bronze

Automatically turn on when motion is detected, adjustable time delay: from 15 seconds to 30 minutes. Single pole, Coverage range up to 30ft mounting, 360 degrees. Input 120-347V, Load 800VA@120V, 1200VA@277V, 1500VA@347V

* This is a discontinued model, please refer to the link below for the replacement we suggested

https://www.bulbspro.com/senpir-hb-01.html

36” Connection Cable, Black, Title 24 Compliant, ASHRAE 90.1 Compliant

PIR Fixture Mount High Bay Occupancy Sensor with Light Sensor (photocell), 120-347V, Title 24 Compliant, ASHRAE 90.1 Compliant

* This item has been discontinued, please refer to the link below for the replacement suggested by the supplier

https://www.bulbspro.com/leviton-hb011-pdx.html

Lutron FCJS-010-BULK8 - Vive PowPak Wireless Fixture Control Module - 6 mA Max Control Current - 120 –277 V - A bulk pack of 8 pieces

Lutron FCJS-ECO-BULK8 - Vive PowPak Fixture Control - EcoSystem LED Driver/Fluorescent Ballast - 120-277 V - A Bulk Pack Of 8 Pieces

Automatically turn on when motion is detected, adjustable time delay: from 30 seconds to 25 minutes. Single pole, Coverage range up to 35ft mounting, 360 degrees. Input 120-347V, Maximum Loading 800VA@120Vac, 1200VA@277Vac, 1500VA@347Vac

Adapter allows Sensor to be mounted to achieve optimum field of view.

Acuity Brands LSXR 4PK - Fixture Mount Interchangeable Lens Sensor - High Bay & Large Motion & Small Motion 360° - High Bay Aiselway - 120-277 VAC - 8'' Lead Length

Occupancy Sensor, Assembly of an OSFLO Adaptor and an HB011-PDX, High Bay, Fixture Mount, lighting control with Daylight Harvesting PIR technology, Single relay with one (1-10VDC sinking current) control line for use to connect directly to low voltage control ballast. Examples i.e. Advance Mark VII or Leviton Sector 7, ballast. 21" Leads, 120-277V, 50/60Hz. Color: White

Dimming Daylight Harvesting PIR Occupancy Sensor; End/Fixture Mount; 120-277VAC 50/60 Hz; IP65 Rating for High and Low-Temp, Watertight, Indoor/Outdoor; Single Zone 0-10V Dimming, 120-277VAC single-pole 5A relay; 8-20’ Lens and 20-40’ lens included, individually boxed.