Surge Protectors / Arresters

The Intermatic AG6503L3 surge arrester is used to maintain any potential power disturbances. It comes in a weatherproof and UV resistant housing, has 3 poles, and 36-inch leads. It is rated for a maximum voltage of 600 volts and has three phases. This surge arrester is UL and CSA cerified for outdoor use. 1 Year Warranty.

120/240 VAC single phase arrester in clamshell packaging. ANSI/UL1449 3rd Edition.

The Intermatic IG1240RC3 AC Surge Protector features six modes of protection and is recommended for residential and light commercial applications. It is intended for installation on 120/240 volt AC panels. The IG1240RC3 incorporates the newest developments in MOV technology and provides individual component thermal protection and monitoring. The failure of a single component will turn the LED indicator OFF and turn the alarm indicator ON. The IG Series Surge Protective Devices are designed for a variety of Type 1 and Type 2 applications. Type 1 applications include outdoor installations before service entrances and utility meter cabinets. Type 2 applications include installations after service entrances.

This hardwired Panel Surge Protector provides greater capacity to handle surge energy (based on its close location to the service ground) compared to standard plug-in strips and is designed for 120/240 volt single or (split-phase) panels. It features dual LED indicators which provide surge protection status on AC and (4) 30 inch 12-gauge leads. Offers 6 Mode protection for the sensitive electronic circuits in your computer, components and electronic appliances. When a surge occurs, the unit responds within 5 nanoseconds, diverting the destructive energy to ground while protecting equipment. Easy to install on main circuit breaker panel.

The Intermatic IG1300-2T-1C3 AC Surge Protector provides protection for 2 telephone lines (analog phone line, modem, or DSL) and 1 coax line (cable TV, cable internet or satellite TV). Protect all your valuable home or small business electronics from transient surges with the Intermatic IG1300-2T-1C3 hardwired surge protective device. It provides greater capacity to handle surge energy (based on the close location to the service ground) compared to standard plug-in strips and is designed for 120/240-Volt single or (split-phase) panels.

The Intermatic IG1300-4T-2C3 AC Surge Protector provides protection for 4 telephone lines (analog phone line, modem, or DSL) and 2 coax lines (cable TV, cable internet or satellite TV). Protect all your valuable home or small business electronics from transient surges with the Intermatic IG1300-4T-2C3 hardwired surge protective device. It provides greater capacity to handle surge energy (based on the close location to the service ground) compared to standard plug-in strips and is designed for 120/240-Volt single or single split-phase panels.

The IG Series Surge Protective Devices are designed for a variety of Type 1 and Type 2 applications. Type 1 applications include outdoor installations before service entrances and utility meter cabinets. Type 2 applications include installations after service entrances. CSA listed to ANSI/UL 1449 3rd edition, the IG series is approved for residential/light commercial services (AC power, telephone and/or cable).

Invest in peace of mind with the AG3000! The easy-to-install AG3000 surge protector is the perfect add-on for HVAC equipment. It features unmatched surge protection ratings and a 3-year, $7,500 connected equipment warranty.

120 VAC Surge Replacement Module. For use with the following surge panels: 52120-M1 (1), 52120-M3 (3), 52412-DS3 (2), 52120-CM2 (2), 52120-M2 (2), 52120-CM3 (3), 52412-DS3 (2)

240 VAC Surge Replacement Module. For use with the following surge panel: 52240-DM3 (3)

277 VAC Surge Replacement Module. For use with the following surge panels: 52277-M3 (3), 52277-CM3 (3), 52277-M3 (3)

240 VAC Surge Replacement Module. For use with the following surge panel: 52412-DS3 (1)

The Intermatic IG112463 Type 3 Point-of-Use Surge Protective device is designed for heavy industrial use with 3-mode surge protection (L-N, L-G, N-G). It features a 15 Amp resttable breaker and 14 gauge SJT power cord with molded plug.

The Intermatic IG112663 Type 3 Point-of-Use Surge Protective device is designed for heavy industrial use with 3-mode surge protection (L-N, L-G, N-G). It features a 15 Amp resttable breaker and 14 gauge SJT power cord with molded plug.

The Intermatic IG112663BLK Type 3 Point-of-Use Surge Protective device is designed for heavy industrial use with 3-mode surge protection (L-N, L-G, N-G). It features a 15 Amp resettable breaker and 14 gauge SJT power cord with molded plug.

The AG Series Surge Protective Devices (SPD) is designed for a variety of Type 1 and Type 2 applications. Type 1 applications include outdoor installations before service entrances and utility meter cabinets. Type 2 applications include installations after service entrances. CSA listed to ANSI/UL1449 3rd edition, the AG series is approved for outdoor applications including: irrigation equipment, farm equipment, pumps, lighting fixtures, traffic signaling devices, HVACR controls, and motors. In Rating: 20kA. SCCR: 50kA.

The AG Series Surge Protective Device (SPD) is designed for a variety of Type 1 and Type 2 applications. Type 1 applications include outdoor installations before service entrances and utility meter cabinets. Type 2 applications include installations after service entrances. CSA listed to ANSI/UL1449 3rd edition, the AG series is approved for outdoor applications including: irrigation equipment, farm equipment, pumps, lighting fixtures, traffic signaling devices, HVACR controls, and motors. In Rating: 20kA. SCCR: 50kA.

The Intermatic AG48013 Surge Protective Device (SPD) is designed for a variety of Type 1 and Type 2 applications. Type 1 applications include outdoor installations before service entrances and utility meter cabinets. Type 2 applications include installations after service entrances. CSA listed to ANSI/UL1449 3rd edition, the AG series is approved for outdoor applications including: irrigation equipment, farm equipment, pumps, lighting fixtures, traffic signaling devices, HVACR controls, and motors. In Rating: 20kA. SCCR: 50kA.

The Intermatic AG4803C3 Surge Protective Device (SPD) is designed for a variety of Type 1 and Type 2 applications. Type 1 applications include outdoor installations before service entrances and utility meter cabinets. Type 2 applications include installations after service entrances. CSA listed to ANSI/UL1449 3rd edition, the AG series is approved for outdoor applications including: irrigation equipment, farm equipment, pumps, lighting fixtures, traffic signaling devices, HVACR controls, and motors. In Rating: 20kA. SCCR: 50kA.