Time Switches (Timer)

The Intermatic 21T156A is a pack of 4 standoff posts. These posts are designed for mounting wiring devices. With the help of Intermatic 21T156A, the toggle switches are mounted inside Intermatic control panels or pool/spa control centers.

Remote Command 1-Air - Designed to control pool/spa combinations economically and reliably away from the equipment - With one touch, these units automatically override the 24 Hour timer - automatic switch the valves from pool-filter mode to the spa/water feature mode - Comes complete with two PE24VA 24-Volt valve actuators

Mechanism only 120/240 VAC, 1.5/3 HP;Used to protect pool and spa equipment and plumbing against freeze damage;They turn the pump and heater ON when the outdoor temperature drops below the temperature set by the user-adjustable thermostat;34/1000-Inch drawn steel, electrostatically coated, beige color enclosure

Timer with thermostat for 240 VAC installation, 3HP - Used to protect pool and spa equipment and plumbing against freeze damage - They turn the pump and heater ON when the outdoor temperature drops below the temperature set by the user-adjustable thermostat - 34/1000-Inch drawn steel, electrostatically coated, beige color enclosure

The Intermatic PE30065RCT3 is a kit for pool use. It comes with an outdoor enclosure with dimensions of 16.5 x 10 x 4.75 inches. It comes with the PE653RC MultiWave ZWave wireless control system, an 80Amp breaker base, and a 300watt transformer.

The Intermatic PE30065RC is a 80 Amp, type 3R load center with the PE653RC MultiWave radio control for pool and spa control systems. This model contains all the necessary controls for the efficient, safe, and automatic operation of your pool and spa equipment in one panel. With this model it is easy to turn your digital control of PE series into a wireless control system. Get the Intermatic PE30065RC with included radio control and make it a fully operative system.

The Intermatic PE30000T3 is a 80 Amp control system with a 300W transformer and type 3R load center for pool and spa control systems. This model contains all necessary controls for the efficient, safe, and automatic operation of your pool and spa equipment in one panel. With this model it is easy to turn your digital control of PE series into a wireless control system.

PE Outdoor Enclosure with 80 Amp Bus

Includes P1353ME For a pool/spa combo Load center with four position 60 Amp breaker base Two knockouts for GFCIs and switches Controls 5 circuits Full thermostat control Operates single, two, and variable-speed pumps 24-hour scheduling capability for all connected equipment Type 3R indoor/outdoor 0.048" steel load center

Includes one P1353ME mechanism - Countdown and override features allow programs to be interrupted for service and automatically resumed without reprogramming your system - 48/1000-Inch steel with electrostatically applied light beige finish enclosure - 60-Amps, 120, 240 VAC or 120, 208 VAC single phase

Includes one P1353ME mechanism;Countdown and override features allow programs to be interrupted for service and automatically resumed without reprogramming your system;48/1000-Inch steel with electrostatically applied light beige finish enclosure

Load center with four position 60 Amp breaker base. - Two knockouts for GFCIs and switches. - Controls 5 circuits. - Full thermostat control. - Operates single, two, and variable-speed pumps.

OUTDOOR ENCLOSURE WITH 80 AMP BUS & PE653RC RADIO CONTROL (MULTIWAVE)

The Intermatic PE34065RCT3 is a kit for pool use. It comes with an outdoor enclosure with dimensions of 16.5 x 10 x 4.75 inches. It comes with the PE653RC MultiWave ZWave wireless control system, an 80Amp breaker base, and a 300watt transformer. This Intermatic kit also comes with a valve actuator control and two compatible 24volt pool/spa water valve actuators.

Mechanism only 240 VAC, 3HP - Used to protect pool and spa equipment and plumbing against freeze damage - They turn the pump and heater ON when the outdoor temperature drops below the temperature set by the user-adjustable thermostat - 34/1000-Inch drawn steel, electrostatically coated, beige color enclosure

The Intermatic PF1102 is a onecircuit freeze protection control that includes a thermostat in type 3R steel enclosure for 240V installations. This control is created for protection of pool and spa equipment against freezing. When temperature drops below the thermostat set one, which is useradjustable, the control turns On the pump with the heater. You can also easily connect the model to a timer or switching device to both control and freezeprotect your equipment.

Water-resistant backlit display shows time of day, equipment status and water and air temperature - Programs and displays all on/off schedules, thermostat settings, time of day and variable pump speeds - Internal memory backup retains communication link during power outages - Ability to copy programming to additional remote controls - Uses three AA batteries (included)

Controls variable speed pumps and two-speed pumps - Included wireless transmitter allows you to control your pool or spa while relaxing in your backyard - Control 5 generic loads for single and two-speed filter pumps, cleaner pumps, pool lights, spa lights, landscape lights, fountains and water features - Enclosure for use as wiring compartment - For 120 or 240 Volt applications

Can be used with Intermatic PE953, P1353ME, P4243ME, P4043ME - Used to control gas or electric heater thermostat - Parts can be added or replaced without interfering with the original system - Modules are capable of working within a system or independently - Receiver, antenna and instructions included