Time Switches (Timer)

The Intermatic PF1102 is a onecircuit freeze protection control that includes a thermostat in type 3R steel enclosure for 240V installations. This control is created for protection of pool and spa equipment against freezing. When temperature drops below the thermostat set one, which is useradjustable, the control turns On the pump with the heater. You can also easily connect the model to a timer or switching device to both control and freezeprotect your equipment.

Water-resistant backlit display shows time of day, equipment status and water and air temperature - Programs and displays all on/off schedules, thermostat settings, time of day and variable pump speeds - Internal memory backup retains communication link during power outages - Ability to copy programming to additional remote controls - Uses three AA batteries (included)

Controls variable speed pumps and two-speed pumps - Included wireless transmitter allows you to control your pool or spa while relaxing in your backyard - Control 5 generic loads for single and two-speed filter pumps, cleaner pumps, pool lights, spa lights, landscape lights, fountains and water features - Enclosure for use as wiring compartment - For 120 or 240 Volt applications

Can be used with Intermatic PE953, P1353ME, P4243ME, P4043ME - Used to control gas or electric heater thermostat - Parts can be added or replaced without interfering with the original system - Modules are capable of working within a system or independently - Receiver, antenna and instructions included

Up to 44 ON/OFF settings per day Water metering increments from 12 minutes to 20 hours and 45 minutes 14-Day Skipper enables irrigation to be omitted on selected day(s) Provides for every other day operation ON/OFF/AUTOMATIC switch enables shutdown during rainy days and extended watering during dry periods without disturbing the cycle set on dial

Tubing is run from the air button to the air control. When the air button is pushed a blast of air travels through the tubing and engages the air control.

The Intermatic RC127B is an air switch button and 75 ft. tubing for Gunite spas. This model is designed to allow control of pool pump, heater, air blower, or lights from the side of the pool with an air button without risk of electric shock. You can increase safety by controlling spa applications with the Intermatic RC127B. This model is also approved by CSA/CUS.

Heavy duty in-wall timer - Up to 6 On/Off settings per 7-day period for a total of 42 settings - Set it once - will change with the sunrise/sunset times - LCD digital clock and readout - Manual override feature

Set it once - follows daily changes for sunrise/sunset times - Single-pole or 3-way applications up to 100 feet - Controls all lighting and heavy-duty loads like fans and appliances - Up to 40 on/off settings per week - Incandescent / fluorescent / LED / CFL-compatible

Key Fob type design - ON/OFF control of up to 3 receiver modules. Intermatic model numbers RC613, RC613L and/or RC613R. - Controls pool lights, pool pumps, booster pumps, blowers and landscape lighting - 100 foot range - Beige color

Can be used with Intermatic RC939;Timer Interface Module without manual button;Operate as ordinary ON/OFF switches but they also respond to the signals of a hand held transmitter;Designed for indoor or outdoor use, and can handle a variety of switching applications;Enclosure: Beige outdoor grade plastic

Can be used with Intermatic RC939 - Heavy duty receiver module - 20-Amps Resistive, 120, 240 V, 12.5-Amps - Designed for indoor or outdoor use, and can handle a variety of switching applications - Enclosure: Beige outdoor grade plastic

Can be used with Intermatic RC939 - Same as RC613 with (3) 36-Inch long leads - Operate as ordinary ON/OFF switches but they also respond to the signals of a hand held transmitter - Designed for indoor or outdoor use, and can handle a variety of switching applications - Enclosure: Beige outdoor grade plastic

This switch provides coordinated control for any pool/spa heater and any filter pump. It is designed to turn OFF a gas fired pool/spa heater approximately 20 minutes before the filter pump shuts down. This eliminates the problem of pounding and knocking due to overheated water, reduces scale and lime deposits and extends the service life of the heater.

Can be used with Intermatic RC939 - Operate as ordinary ON/OFF switches but they also respond to the signals of a hand held transmitter - Designed for indoor or outdoor use, and can handle a variety of switching applications - Enclosure: Beige outdoor grade plastic

The Intermatic RC2163BFE is an air switch control system. This model is specifically designed to control spa/pool combinations reliably and economically away from the equipment. The system comes with two PE24VA 24Volt valve actuators. With one touch, the Intermatic RC2163BFE automatically turn ON the filter pump and override the 24Hour timer and switch the valves from poolfilter mode to the water/spa feature mode.

The Intermatic 21T156A is a pack of 4 standoff posts. These posts are designed for mounting wiring devices. With the help of Intermatic 21T156A, the toggle switches are mounted inside Intermatic control panels or pool/spa control centers.

Remote Command 1-Air - Designed to control pool/spa combinations economically and reliably away from the equipment - With one touch, these units automatically override the 24 Hour timer - automatic switch the valves from pool-filter mode to the spa/water feature mode - Comes complete with two PE24VA 24-Volt valve actuators

Intermatic 178T24 THERMOSTAT FOR FP1102T/PF1103T