Time Switches (Timer)

The Intermatic RC127B is an air switch button and 75 ft. tubing for Gunite spas. This model is designed to allow control of pool pump, heater, air blower, or lights from the side of the pool with an air button without risk of electric shock. You can increase safety by controlling spa applications with the Intermatic RC127B. This model is also approved by CSA/CUS.

The sensor is designed to protect the pool and spa equipment and plumbing against freeze damage. The sensor plugs into the circuit board on the back of the P1353ME and turns ON the filter pump when air temperature drops below the programmed temperature. The freeze programming mode will not appear unless the sensor is plugged into the clock.

Intermatic 178T24 THERMOSTAT FOR FP1102T/PF1103T

Remote Command 1-Air - Designed to control pool/spa combinations economically and reliably away from the equipment - With one touch, these units automatically override the 24 Hour timer - automatic switch the valves from pool-filter mode to the spa/water feature mode - Comes complete with two PE24VA 24-Volt valve actuators

The Intermatic 21T156A is a pack of 4 standoff posts. These posts are designed for mounting wiring devices. With the help of Intermatic 21T156A, the toggle switches are mounted inside Intermatic control panels or pool/spa control centers.

The Intermatic RC2163BFE is an air switch control system. This model is specifically designed to control spa/pool combinations reliably and economically away from the equipment. The system comes with two PE24VA 24Volt valve actuators. With one touch, the Intermatic RC2163BFE automatically turn ON the filter pump and override the 24Hour timer and switch the valves from poolfilter mode to the water/spa feature mode.

Can be used with Intermatic RC939 - Operate as ordinary ON/OFF switches but they also respond to the signals of a hand held transmitter - Designed for indoor or outdoor use, and can handle a variety of switching applications - Enclosure: Beige outdoor grade plastic

This switch provides coordinated control for any pool/spa heater and any filter pump. It is designed to turn OFF a gas fired pool/spa heater approximately 20 minutes before the filter pump shuts down. This eliminates the problem of pounding and knocking due to overheated water, reduces scale and lime deposits and extends the service life of the heater.

Can be used with Intermatic RC939 - Same as RC613 with (3) 36-Inch long leads - Operate as ordinary ON/OFF switches but they also respond to the signals of a hand held transmitter - Designed for indoor or outdoor use, and can handle a variety of switching applications - Enclosure: Beige outdoor grade plastic

Can be used with Intermatic RC939 - Heavy duty receiver module - 20-Amps Resistive, 120, 240 V, 12.5-Amps - Designed for indoor or outdoor use, and can handle a variety of switching applications - Enclosure: Beige outdoor grade plastic

Can be used with Intermatic RC939;Timer Interface Module without manual button;Operate as ordinary ON/OFF switches but they also respond to the signals of a hand held transmitter;Designed for indoor or outdoor use, and can handle a variety of switching applications;Enclosure: Beige outdoor grade plastic

Key Fob type design - ON/OFF control of up to 3 receiver modules. Intermatic model numbers RC613, RC613L and/or RC613R. - Controls pool lights, pool pumps, booster pumps, blowers and landscape lighting - 100 foot range - Beige color

Set it once - follows daily changes for sunrise/sunset times - Single-pole or 3-way applications up to 100 feet - Controls all lighting and heavy-duty loads like fans and appliances - Up to 40 on/off settings per week - Incandescent / fluorescent / LED / CFL-compatible

Heavy duty in-wall timer - Up to 6 On/Off settings per 7-day period for a total of 42 settings - Set it once - will change with the sunrise/sunset times - LCD digital clock and readout - Manual override feature

100-Watt Transformer - Contains one T104M mechanism - Cost effective electrical control center for any pool or spa installation - The T40000RT Series panels will accept additional Intermatic mechanisms and/or components - Inside the enclosure are the time switch, the transformer and other components needed for the completion of this installation

Intermatic T10101R Pool/Spa Control Center 2xT101M

Provides coordinated control for heater and filter pump operations - Designed to turn OFF a gas fired swimming pool heater approximately 20 minutes before the filter pump shuts down - Eliminates the problem of pounding and knocking due to overheated water, reduces scale and lime deposits and extends the service life of the heater - The 24-hour dial allows up to 12 ON/OFF operations each day - One set of ON and OFF trippers is supplied with each switch

Time switch in plastic enclosure with heater protection, DPST Switch, 208-277 Clock Supply-Volt - Designed for commercial, industrial and residential applications - Have the highest motor load ratings in the industry - Equipped with ON and OFF trippers - Heater Protection Circuit: 10-Amps, 240-Volt max

Time switch in metal enclosure with heater protection, DPST Switch, 208-277 Clock Supply-Volt - Designed for commercial, industrial and residential applications - Have the highest motor load ratings in the industry - Equipped with ON and OFF trippers - Heater Protection Circuit: 10-Amps, 240-Volt max