Time Switches (Timer)

Intended for disconnecting electrical equipment from its power source, quickly and safely, in case of emergency - Fits in a single-gang junction box and is rated for outdoor installations - Easy shut down procedure of the connected equipment by simply moving the large red lever to the OFF position - Electric grade plastic housing - Beige powder coated steel face plate

The Intermatic PC1120LS1 is a onechannel light controller with a single channel switch and an LS1 sensor from the LightMaster PC series. Based on the amount of natural light in an area, this lighting control system is designed to control one or two circuits independently.

The Intermatic PC1120LS2 is a onechannel light controller with a single channel switch and an LS2 sensor from the LightMaster PC series. Based on the amount of natural light in an area, this lighting control system is designed to control one or two circuits independently.

7-Day Electromechanical Timer Module w/Battery Backup, 21Amps, SPDT, 120 Volt, Minimum ON/OFF Time 2 Hour, Flush Mounting, NO Override Function.

This WP1010HMXD (AKA Slim) is simple to use and easy to install. It meets/exceeds 2011 NEC code requirements for "Extra Duty" applications along with wet locations. Re-inforced hinge design meets the challenge of commercial use. High impact rating allows cover to take a beating from today's environment and remain intact.

The Intermatic WP1250C is a doublegang, weatherproof receptacle cover. This vertical cover is easy to install, as it already comes with base cover assembly, gasket, mounting screws and patented inserts. This clear receptacle cover is ideal for schools and commercial buildings. It is intended to be used for vertical outdoor outlets which are situated in a wet location. This clear cover fits over any wall outlet or switch. The connection is protected from weather by its preadhered neoprene gasket. The cover provides usable inside depth of 4 3/4".

Single-gang models include 3 patented inserts that create 16 different combinations, can be hung vertically or horizontally - Reinforced hinge pin designed to exceed 40 lb hinge hang/stress test - Impact rated: 12 lb impact test to ensure cover remains intact - Lockable hasp: accepts up to 0.25" diameter shank - Meets requirements for cold impact testing: -60 DegreeF (-51 DegreeC)

Single-gang models include 3 patented inserts that create 16 different combinations, can be hung vertically or horizontally - Reinforced hinge pin designed to exceed 40 lb hinge hang/stress test - Impact rated: 12 lb impact test to ensure cover remains intact - Lockable hasp: accepts up to 0.25" diameter shank - Meets requirements for cold impact testing: -60 DegreeF (-51 DegreeC)

Single-gang models include 3 patented inserts that create 16 different combinations, can be hung vertically or horizontally - Reinforced hinge pin designed to exceed 40 lb hinge hang/stress test - Impact rated: 12 lb impact test to ensure cover remains intact - Lockable hasp: accepts up to 0.25" diameter shank - Meets requirements for cold impact testing: -60 DegreeF (-51 DegreeC)

The Intermatic WP5000C is a 2.25inch weatherproof cover in clear. This model is made of extraduty plastic that provides longlasting protection. The cover is ideal for all types of rugged applications: commercial, industrial, residential, manufacturing, and more. The Intermatic WP5000C is easy to install, it includes a base, adhered gasket, cover assembly, mounting screws, and inserts for different applications. This singlegang cover can be mounted horizontally or vertically.

Single-gang models include 3 patented inserts that create 16 different combinations, can be hung vertically or horizontally - Reinforced hinge pin designed to exceed 40 lb hinge hang/stress test - Impact rated: 12 lb impact test to ensure cover remains intact - Lockable hasp: accepts up to 0.25" diameter shank - Meets requirements for cold impact testing: -60 DegreeF (-51 DegreeC)

Single-gang models include 3 patented inserts that create 16 different combinations, can be hung vertically or horizontally - Reinforced hinge pin designed to exceed 40 lb hinge hang/stress test - Impact rated: 12 lb impact test to ensure cover remains intact - Lockable hasp: accepts up to 0.25" diameter shank - Meets requirements for cold impact testing: -60 DegreeF (-51 DegreeC)

Single-gang models include 3 patented inserts that create 16 different combinations, can be hung vertically or horizontally - Reinforced hinge pin designed to exceed 40 lb hinge hang/stress test - Impact rated: 12 lb impact test to ensure cover remains intact - Lockable hasp: accepts up to 0.25" diameter shank - Meets requirements for cold impact testing: -60 DegreeF (-51 DegreeC)

Single-gang models include 3 patented inserts that create 16 different combinations, can be hung vertically or horizontally - Reinforced hinge pin designed to exceed 40 lb hinge hang/stress test - Impact rated: 12 lb impact test to ensure cover remains intact - Lockable hasp: accepts up to 0.25" diameter shank - Meets requirements for cold impact testing: -60 DegreeF (-51 DegreeC)

Single-gang models include 3 patented inserts that create 16 different combinations, can be hung vertically or horizontally - Reinforced hinge pin designed to exceed 40 lb hinge hang/stress test - Impact rated: 12 lb impact test to ensure cover remains intact - Lockable hasp: accepts up to 0.25" diameter shank - Meets requirements for cold impact testing: -60 DegreeF (-51 DegreeC)

The WP1220WC Plastic In-Use Covers are easy to install and shipped with gasket, mounting screws, base cover assembly and patented inserts for serve applications, such as schools and commercial buildings.

The WP1220GC Plastic In-Use Covers are easy to install and shipped with gasket, mounting screws, base cover assembly and patented inserts for serve applications, such as schools and commercial buildings.

The Intermatic WP3103C is a singlegang, weatherproof receptacle cover. This vertical/horizontal cover is easy to install, as it already comes with base cover assembly, gasket, mounting screws and patented inserts. This clear receptacle cover is ideal for schools and commercial buildings. It is intended to be used for both vertical and horizontal outdoor outlets which are situated in a wet location. This clear cover fits over any wall outlet or switch. The connection is protected from weather by its preadhered neoprene gasket. The cover provides usable inside depth of 2 3/4".

This WP1010MXD (AKA Boss) is simple to use and easy to install. It meets/exceeds 2011 NEC code requirements for "Extra Duty" applications along with wet locations. Re-inforced hinge design meets the challenge of commercial use. High impact rating allows cover to take a beating from today's environment and remain intact.