Time Switches (Timer)

The Intermatic valve actuator control is an affordable control that would only automate a set of water valves from the pool position to the spa position. It can turn a single water valve to engage a water feature. Easily snap into most existing Intermatic enclosures with available mechanism support bracket. Controls up to three valve actuators. Switches heater and thermostat HIGH/LOW and features remote control capabilities.

Controls up to 5 loads - 100 amp circuit breaker bus - 120VAC and 240 VAC capabilities - System displays status of each of the 4 on-demand circuits and pool/spa water temperature - Approved for direct connect of lights

Includes P1353ME and a radio remote control Multi-voltage input and output Controls single and two-speed pumps and cleaner/booster pumps Three ON/OFF events per circuit per day Seven pre-programmed modes Freeze and heater protection Replaces 3 mechanical timers all-in-one Countdown and override features enable programs to be overridden and automatically resumed without requiring the user to reprogram the system Fireman's switch connection

This inerratic 3 circuit switch is for 1 and 2 speed pumps. It can control up to 3 circuit and 3 ON/OFF events per day. There are 7 pre-programmed combinations to choose from.

For 1 and 2-speed pumps;Controls 3 circuits;3 ON/OFF events per day;7 pre-programmed combinations to choose from;Add on other pool/spa related devices

Controls a total of three timed circuits, including single speed or two-speed filter pumps, pool lights, spa lights and landscape lights;Countdown and override features allow programs to be interrupted for service and automatically resumed without reprogramming your system;48/1000-Inch steel with electrostatically applied light beige finish enclosure

Controls a total of three timed circuits, including single speed or two-speed filter pumps, pool lights, spa lights and landscape lights;Countdown and override features allow programs to be interrupted for service and automatically resumed without reprogramming your system;48/1000-Inch steel with electrostatically applied light beige finish enclosure

Controls up to 5 loads - 100 amp circuit breaker bus - 120VAC and 240 VAC capabilities - System displays status of each of the 4 on-demand circuits and pool/spa water temperature - Approved for direct connect of lights

The Intermatic PE14065RC is a kit for pool use. It comes with an outdoor enclosure with dimensions of 14.75 x 14.75 x 4.25 inches. It comes with the PE653RC MultiWave ZWave wireless control system, a valve actuator control, and two compatible 24volt pool/spa water valve actuators.

Provide automatic control for pumps, cleaners and other types of loads - Quick connect terminals for easy installation - Timers have three-way mounting; flush in round opening, raised in rectangular opening or on base - Black housing with white screening and orange trippers - 8 oz (0.22 kg) All mechanisms are shipped in bulk (36 per carton) unless otherwise specified

Add Automated Timer Control to Freeze Protection Systems 7 Day Timer Control Allows for Increased Adjust-ability

Valve/Pump Switch Mechanism

Easily snap into most existing Inerratic enclosures with available mechanism support bracket - Controls up to three valve actuators - Switches heater and thermostat HIGH/LOW - Remote control capabilities - Mechanism only, type 3R enclosure not included

24Hr Programmable 1or2-Spd Seasonality Timer Mechanism with Additional Aux Circuit

The Intermatic P1261P is a portable twocircuit fountain timer. This model includes a plugin for a pool pump (for a timed circuit) and a plugin for a pool light (for a live circuit). The timer also comes with a builtin threeprong grounded plug with GFCI protected circuits for the time switch supply.

These portable two-circuit fountain timers incorporate a plug in for a timed circuit (normally used for a pool pump) and a plug-in for a live circuit (typically used for a pool light). GFCI protected circuits and a three-prong grounded plug for the time switch supply are also built-in.

The P1131 portable outdoor pool timer is specially designed to control the filter pump of a portable or above-ground pool or spa, but it can also be used to turn on and off (in off-season) outdoor decoration, engine block heaters, and other appliances--indoors or outdoors. For applications up to 15 amps. Comes with twist-lock plug and receptacle.

The P1121 Heavy Duty Outdoor Timer is specifically designed to control outdoor decorations and holiday lighting, but it can also be used to the filter pump of an above ground pool. This 120-Volt timer has a manual override ON/OFF switch, a waterproof cover and a 12-Inch grounded cord.

Used in multiple applications: Lights, Fans, Signs, Air Conditioners, Engine Block Heaters - 15-Amps (1800-Watt) Resistive or Tungsten; 1 HP Air Conditioner, (15 FLA, 90 LRA), Motor Load - Designed to control the filter pump of a portable pool or spa - Can also be used to turn ON and OFF outdoor decorations - Outdoor grade plastic enclosure