Time Switches (Timer)

Plastic In-Use Cover - 2 Gang or 1 Gang 3-1/8" Deep w/ 1 Gang Duplex and GFCI Inserts - Clear

Plastic In-Use Cover - 2 Gang or Single Gang 2-1/4" w/ 1 Gang Duplex and GFCI Inserts - White

Intermatic WP1020GC - Plastic in Use Cover - 2 Gang or Single Gang 2-1/4" w/ 1 Gang Duplex and GFCI Inserts - Gray

Single-gang Vertical with (WP17) Flexi-Guard Inserts, 2-1/4-Inch Depth, Clear;Complies with 2008 NEC Article 406.8(B);Patented inserts offer more configurations and cover more jobs;Heavy-duty polycarbonate construction;Meets requirements for cold impact testing at -60 Degree Fahrenheit (-51 Degree Celsius)

The WP1000WC Plastic In-Use Covers are easy to install and shipped with gasket, mounting screws, base cover assembly and patented inserts for serve applications, such as schools and commercial buildings.

Single-gang Vertical with (WP17) Flexi-Guard Inserts, 2-1/4-Inch Depth, Gray - Complies with 2008 NEC Article 406.8(B) - Patented inserts offer more configurations and cover more jobs - Heavy-duty polycarbonate construction - Meets requirements for cold impact testing at -60 Degree Fahrenheit (-51 Degree Celsius)

The Intermatic WP1000HC is a singlegang, weatherproof receptacle cover. This horizontal cover is easy to install, as it already comes with base cover assembly, gasket, mounting screws and patented inserts. This clear receptacle cover is ideal for schools and commercial buildings. It is intended to be used for horizontal outdoor outlets which are situated in a wet location. This clear cover fits over any wall outlet or switch. The connection is protected from weather by its preadhered neoprene gasket. The cover provides usable inside depth of 2 1/4".

Single-gang Vertical with (WP17) Flexi-Guard Inserts, 2-1/4-Inch Depth, Gray - Complies with 2008 NEC Article 406.8(B) - Patented inserts offer more configurations and cover more jobs - Heavy-duty polycarbonate construction - Meets requirements for cold impact testing at -60 Degree Fahrenheit (-51 Degree Celsius)

208-277 VAC; 40 Amps per pole - 3PST switch for control of 3-phase lighting - Three Skipper screws included - Independent clock motor terminals - This product should only be installed in Zone 34

208-277 VAC; 40 Amps per pole - 3PST switch for control of 3-phase lighting - Three Skipper screws included - Independent clock motor terminals - This product should only be installed in Zone 30

Beige finish - All plastic NEMA 3R rated for Indoor/Outdoor installation - Can be used with the Intermatic P1000 and P7000 Series - 93/8-Inch (23.9 cm) Height by51/2-Inch (14.0 cm) Width by 35/8-Inch (9.2 cm) Diameter - Combination 1/2-Inch - 3/4-Inch nominal knockouts, 1 on back and each side of enclosure, and 2 on bottom

24Hr Programmable 1or2-Spd Seasonality Timer Mechanism with Additional Aux Circuit

The Intermatic P1261P is a portable twocircuit fountain timer. This model includes a plugin for a pool pump (for a timed circuit) and a plugin for a pool light (for a live circuit). The timer also comes with a builtin threeprong grounded plug with GFCI protected circuits for the time switch supply.

These portable two-circuit fountain timers incorporate a plug in for a timed circuit (normally used for a pool pump) and a plug-in for a live circuit (typically used for a pool light). GFCI protected circuits and a three-prong grounded plug for the time switch supply are also built-in.

Water-resistant backlit display shows time of day, equipment status and water and air temperature - Programs and displays all on/off schedules, thermostat settings, time of day and variable pump speeds - Internal memory backup retains communication link during power outages - Ability to copy programming to additional remote controls - Uses three AA batteries (included)

Controls variable speed pumps and two-speed pumps - Included wireless transmitter allows you to control your pool or spa while relaxing in your backyard - Control 5 generic loads for single and two-speed filter pumps, cleaner pumps, pool lights, spa lights, landscape lights, fountains and water features - Enclosure for use as wiring compartment - For 120 or 240 Volt applications

The Intermatic PE30065RCT3 is a kit for pool use. It comes with an outdoor enclosure with dimensions of 16.5 x 10 x 4.75 inches. It comes with the PE653RC MultiWave ZWave wireless control system, an 80Amp breaker base, and a 300watt transformer.

The Intermatic PE30065RC is a 80 Amp, type 3R load center with the PE653RC MultiWave radio control for pool and spa control systems. This model contains all the necessary controls for the efficient, safe, and automatic operation of your pool and spa equipment in one panel. With this model it is easy to turn your digital control of PE series into a wireless control system. Get the Intermatic PE30065RC with included radio control and make it a fully operative system.

Includes one P1353ME mechanism - Countdown and override features allow programs to be interrupted for service and automatically resumed without reprogramming your system - 48/1000-Inch steel with electrostatically applied light beige finish enclosure - 60-Amps, 120, 240 VAC or 120, 208 VAC single phase