Time Switches (Timer)

Provide remote control for one, two or three separate loads - Enables the user to operate a pump, a blower and a light up to 75 feet away - Have a 24-hour digital, multiple program timer - Enclosure For Indoor/Outdoor installations, beige plastic

The Intermatic RC2103S is an air actuated remote control. This model is designed to allow control of pool pump, heater, air blower, or lights from the side of the pool with an air button and tubing without risk of electric shock (air hose and button are not included). You can increase safety by controlling spa applications with the Intermatic RC2103S.

Up to 44 ON/OFF settings per day Water metering increments from 12 minutes to 20 hours and 45 minutes 14-Day Skipper enables irrigation to be omitted on selected day(s) Provides for every other day operation ON/OFF/AUTOMATIC switch enables shutdown during rainy days and extended watering during dry periods without disturbing the cycle set on dial

Designed to supply 12 volts to pool/spa lights, submersible fixtures and outdoor garden lights - Grounded shield between the primary and secondary windings - Built-in circuit protection

Designed to supply 12 volts to pool/spa lights, submersible fixtures and outdoor garden lights - Grounded shield between the primary and secondary windings - Built-in circuit protection

Thermostat only 120/240 VAC installation, 1.5/3 HP - Used to protect pool and spa equipment and plumbing against freeze damage - They turn the pump and heater ON when the outdoor temperature drops below the temperature set by the user-adjustable thermostat - 34/1000-Inch drawn steel, electrostatically coated, beige color enclosure

Includes one P1353ME mechanism;Countdown and override features allow programs to be interrupted for service and automatically resumed without reprogramming your system;48/1000-Inch steel with electrostatically applied light beige finish enclosure

The Intermatic PE20065RC is a 60 Amp pool and spa control system with type 3R load center. This model contains all the necessary controls for the efficient, safe, and automatic operation of your pool and spa equipment in one panel. With this model it is easy to turn your digital control of PE series into a wireless control system. Get the Intermatic PE20065RC with included radio control and make it a fully operative system.

This inerratic 3 circuit switch is for 1 and 2 speed pumps. It can control up to 3 circuit and 3 ON/OFF events per day. There are 7 pre-programmed combinations to choose from.

For 1 and 2-speed pumps;Controls 3 circuits;3 ON/OFF events per day;7 pre-programmed combinations to choose from;Add on other pool/spa related devices

Controls a total of three timed circuits, including single speed or two-speed filter pumps, pool lights, spa lights and landscape lights;Countdown and override features allow programs to be interrupted for service and automatically resumed without reprogramming your system;48/1000-Inch steel with electrostatically applied light beige finish enclosure

Controls a total of three timed circuits, including single speed or two-speed filter pumps, pool lights, spa lights and landscape lights;Countdown and override features allow programs to be interrupted for service and automatically resumed without reprogramming your system;48/1000-Inch steel with electrostatically applied light beige finish enclosure

The Intermatic valve actuator control is an affordable control that would only automate a set of water valves from the pool position to the spa position. It can turn a single water valve to engage a water feature. Easily snap into most existing Intermatic enclosures with available mechanism support bracket. Controls up to three valve actuators. Switches heater and thermostat HIGH/LOW and features remote control capabilities.