Time Switches (Timer)

The GM40AVE-RD89 is a universal, electronic time switch designed for general purpose residential and commercial applications. The robust 40 A time control automatically detects the input voltage without the use of a DIP switch or selector pins. The time switch automatically selects any voltage between 120 VAC and 277 VAC. The mechanism is mounted in a compact UL Type 3R outdoor enclosure and can also be easily retrofitted into other Intermatic enclosure types. The time control features a DPDT switching configuration standard (i.e. two normally open and two normally closed contacts).

24 Hour Time Switch 40A 120V SPST Indoor/Outdoor Clear Cover Plastic Enclosure

The Intermatic GM40AVQ is a 40Amp autovoltage time switch with Type 3R plastic enclosure. This model is designed to automatically detect the input voltage. In order to do it, the universal electromechanical control doesn't need to use any selector pins or a DIP switch. Any voltage in a range between 120 VAC and 277 VAC is automatically selected by the time switch which is designed to control loads for lighting with high amperage, pumps, HVAC, fan controls, motors, agricultural facilities, access controls, and electrical circuits of general purpose. The model is mounted in UL outdoor plastic enclosure Type 3R.

24 Hour Cycle Timer 20A 120V SPDT Indoor/Outdoor Plastic Enclosure

The Intermatic GM40AVQW is a 40 Amp, autovoltage time switch with battery backup. This universal electromechanical control is designed to detect the input voltage automatically without the use of selector pins or DIP switch. Also, any voltage between 120VAC and 277 VAC is selected by this timer automatically. The Intermatic GM40AVQW can control high amperage loads for HVACR, lighting, motors, pumps, agricultural facilities, access controls, fan controls, and general purpose electrical circuits. In addition, this unit features a DPDT Switching Configuration standard and can be mounted in a compact Type 3R outdoor enclosure.

24 Hour Cycle Timer 20A 480V SPDT Indoor/Outdoor Plastic Enclosure

The Intermatic GM40AV-W is a 40Amp autovoltage time switch mechanism. This model is designed to automatically detect the input voltage. In order to do it, the universal electromechanical control doesn't need to use any selector pins or a DIP switch. Any voltage in a range between 120 VAC and 277 VAC is automatically selected by the time switch which is designed to control loads for lighting with high amperage, pumps, HVAC, fan controls, motors, agricultural facilities, access controls, and electrical circuits of general purpose.The model is mounted in UL outdoor enclosure Type 3R.

Water-resistant backlit display shows time of day, equipment status and water and air temperature - Programs and displays all on/off schedules, thermostat settings, time of day and variable pump speeds - Internal memory backup retains communication link during power outages - Ability to copy programming to additional remote controls - Uses three AA batteries (included)

120 VAC; 40 Amps per pole, 3PST switch for control of 3-phase lighting, Three Skipper screws included, Independent clock motor terminals, This product should only be installed in Zone 34

Highest motor load ratings in the industry Provides direct 24 hour control of most loads 1 to 12 ON/OFF operations each day Minimum ON/OFF times of 1 hour All models equipped with one ON and one OFF tripper

Includes one P1353ME mechanism;Countdown and override features allow programs to be interrupted for service and automatically resumed without reprogramming your system;48/1000-Inch steel with electrostatically applied light beige finish enclosure

NEMA 3R - Plastic Case 125 V SPST With 24 V 20 VA Transformer

Time switch in plastic enclosure with heater protection, DPST Switch, 208-277 Clock Supply-Volt - Designed for commercial, industrial and residential applications - Have the highest motor load ratings in the industry - Equipped with ON and OFF trippers - Heater Protection Circuit: 10-Amps, 240-Volt max

Controls a total of three timed circuits, including single speed or two-speed filter pumps, pool lights, spa lights and landscape lights;Countdown and override features allow programs to be interrupted for service and automatically resumed without reprogramming your system;48/1000-Inch steel with electrostatically applied light beige finish enclosure

The Intermatic RC2163BFE is an air switch control system. This model is specifically designed to control spa/pool combinations reliably and economically away from the equipment. The system comes with two PE24VA 24Volt valve actuators. With one touch, the Intermatic RC2163BFE automatically turn ON the filter pump and override the 24Hour timer and switch the valves from poolfilter mode to the water/spa feature mode.

The Intermatic P1261P is a portable twocircuit fountain timer. This model includes a plugin for a pool pump (for a timed circuit) and a plugin for a pool light (for a live circuit). The timer also comes with a builtin threeprong grounded plug with GFCI protected circuits for the time switch supply.

Designed to supply 12 volts to pool/spa lights, submersible fixtures and outdoor garden lights - Grounded shield between the primary and secondary windings - Built-in circuit protection

208-277 VAC; 40 Amps per pole - 3PST switch for control of 3-phase lighting - Three Skipper screws included - Independent clock motor terminals - This product should only be installed in Zone 34

The Intermatic PE30065RCT3 is a kit for pool use. It comes with an outdoor enclosure with dimensions of 16.5 x 10 x 4.75 inches. It comes with the PE653RC MultiWave ZWave wireless control system, an 80Amp breaker base, and a 300watt transformer.